I compiled a fresh install of httpd on a new linux box, added a virtual hosts entry for an https site, but when I try to start apache I get the error:
Code:
Invalid command 'SSLEngine', perhaps misspelled or defined by a module not included in the server configuration Is this because I don't have mod_ssl compiled in?
I am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration" Saw this thread in /etc/apache2/mods-enabled/ I see
[Code]...
I am getting this error when trying to start apache. This is on a server that was functioning but now, when I tried to restart the server, this error shows up when trying to start the httpd service. The command that is causing the error is: CustomLoglogs/rosewood.access combined However, my guess is that it has something to do with either a module not being loaded or something wrong with the setup. But, as I said, this server was running so I am really not sure what changed. Server is Apache 2.0.52.
View 2 Replies View RelatedI am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration"
Saw this thread in /etc/apache2/mods-enabled/ I see
Code:
alias.conf authz_default.load autoindex.conf deflate.conf
dump_io.load mime.load proxy.conf proxy.load[code]...........
Apache is complaining about an error with SetEnvIfNoCase when I tried to start it. I've checked that the module /usr/local/apache2/modules/mod_rewrite.so exists. Also the 2nd code block below shows that I'm using the <IfModule rewrite_module></IfModule> tags so if the module isn't available, Apache shouldn't have read that part of the file. The fact that it's reading inside that tag pair means it's able to load the mod_rewrite.so DSO.
Code:
[root@test httpd-2.2.19]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 203 of /usr/local/apache2/conf/httpd.conf:
Invalid command 'SetEnvIfNoCase', perhaps misspelled or defined by a module not included in the server configuration
[Code]...
I am trying to install Zend Server, and that went well. Apache and all the other items were installed.
But when I go to start Apache, I get this error:
Quote:
root@laptop:~# /etc/init.d/apache2 restart
* Restarting web server apache2 Syntax error on line 6 of /etc/apache2/sites-enabled/zendserver_gui.conf:
Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configuration
[fail]
And on line 6: php_admin_flag tidy.clean_output off
The rest of the file is below:
Quote:
# Warning: Modifying this file will break the Zend Server Administration Interface
Listen 127.0.0.1:10083
NameVirtualHost 127.0.0.1:10083
# do not allow override of this value for the UI's Vhost as it should always be off when generating non-html content such as dynamic images
code....
I am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13
View 99 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
View 9 Replies View RelatedJust followed the link [URL] for installing apache with --enable-so only. How can I install mod_proxy into the same?
View 2 Replies View Relatedhow to install PHP which is run as an Apache module or run as CGI on detain.
View 3 Replies View RelatedI am running apache httpd-2.2.3-43.el5.centos.3 When i restart the http, it says the following error "Invalid command 'JkSet', perhaps misspelled or defined by a module not included in the server configuration "
Do I need to install anything like tomcat? or include any configuration setting in apache? kernel version: 2.6.18-194.32.1.el5
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedI want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?
NOTE: apache have the privileges to execute the command
With hello kernel module, i use two types of Makefile, one is using kernel build system:
obj-m += hello.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
module loads successfully; another is using (CC) and then creating the module by "make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules", this module gives the error message when it is inserted, .........
So I made the upgrade to slackware64-current and all of a sudden after my next reboot, startx failed, and x refused to start the output was the following:
Code:
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux hd830 2.6.33 #3 SMP Sat Feb 27 19:42:32 CST 2010 x86_64
Kernel command line: BOOT_IMAGE=Linux ro root=803 vt.default_utf8=0
Build Date: 23 February 2010 12:09:32PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 6 19:21:18 2010
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
WARNING: Error inserting button (/lib/modules/2.6.33/kernel/drivers/acpi/button.ko): Invalid module format
WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.33/kernel/drivers/i2c/algos/i2c-algo-bit.ko): Invalid module format
WARNING: Error inserting agpgart (/lib/modules/2.6.33/kernel/drivers/char/agp/agpgart.ko): Invalid module format
WARNING: Error inserting drm (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm.ko): Invalid module format
WARNING: Error inserting drm_kms_helper (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm_kms_helper.ko): Invalid module format
FATAL: Error inserting i915 (/lib/modules/2.6.33/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel modesetting driver detected.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support. Please also check the log file at "/var/log/Xorg.0.log" for additional information. So then after some googling I got the suggestion to downgrade udev-151 to udev-141, but that yeilded no results. So I did some more googling and a bunch of people who had the same problem said that downgrading module-init-tools worked, so I downgraded from module-init-tools 3.11 something to 3.6 and now, not only does my X no longer work, but no modules are being loaded I believe, for example I saw in my startup that fuse was not being loaded, ndiswrapper which I had installed was not loaded.
I've got a brand new Advantech USB 4761 Digital/Analog PC Lab card. They claim to run under Linux. The install, " dpkg -i advdaq_1.04.0006-1_i386.deb", was successful. But when I tried to modify and run their install script, "adv_load_template", I get this:./adv_load_templateinsmod: error inserting './modules/advdrv_core.ko': -1 Invalid module format insmod: error inserting './modules/usb4761.ko': -1 Invalid module format
View 1 Replies View RelatedI successfully built the sources for 64 bit linux drivers from [URL].... on the 64 bit F14 machine: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux and got wl.ko:
[Code]...
I am trying to compile the Cisco vpnclient on my Opensuse 11.2 and (after some troubles) I got the module compiled and installed but when I try to load with insmod I got this error
<</etc/init.d/vpnclient_init start
Starting /opt/cisco-vpnclient/bin/vpnclient: insmod: error inserting '/lib/modules/2.6.31.12-0.2-default/CiscoVPN/cisco_ipsec.ko': -1 Invalid module format
Failed (insmod)>>
I am able to use the vpnclient forcing the module with modprobe -f cisco_ipsec but I'd prefer to solve the 'invalid format' original problem. I 'googled' around and it seems related with this warning during vpn_install script "WARNING: Symbol version dump /usr/src/linux-2.6.31.12-0.2/Module.symvers is missing; modules will have no dependencies and modversions." I have these rmps:........
We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
I am using reliance zte modem ac2726.i inserted the modem in my laptop and tried wvdialconf command and it was working.but when i type
Code:
modprobe usbserial vendor=0x19d2 product=0xfffd
command it shows the following error message
Code:
FATAL: Error inserting usbserial (/lib/modules/2.6.29.4-167.fc11.i686.PAE/kernel/drivers/usb/serial/usbserial.ko): Invalid module format
But "cat /proc/bus/usb/devices","lsusb","dmesg" everything are working perfectly."Wvdial.conf" file also got configured perfectly.what can i do now?
A little background first: Wireless card: Broadcom BCM4312 Wireless driver used: [URL].... (and slackbuild variation of the same)
GFX card: nVidia geForce 7150m I installed Slackware yesterday, along side my Ubuntu (yes yes, I use Ubuntu lol. I've been using it for about four years, I added Slackware to grub.cfg, using the OS prober, which added four menu entries. The first two caused kernel panic, the third worked, and I don't think I tried the fourth. (I'm pretty sure they were, in this order: generic, generic-smp, huge, and huge-smp). Using huge, I could not modprobe my wireless driver, I would get a "Invalid Module Format" error with wl, and when installing the nVidia drivers (from their site), I would get:
[code]....
I then booted using a menuentry my friend gave me, created my initrd, and everything worked fine, both graphics and wireless (mostly fine). So I upgraded to -current, kernel 2.6.35.10, and I started getting the same errors as before, 'Invalid Module format' and the same thing with the nVidia drivers, although this time, it happens regardless of if I use the generic kernel, or the huge kernel. I've done heaps of Google'ing around, and nothing I found worked.
i installed SLES 11 sp1 as guest on openSUSE 11.3 host, then change the adapter network from 'NAT' to 'Bridged Adapter', but when i hit start i got this error message: Failed to open a session for the virtual machine sles. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). but when run: sudo /etc/init.d/vboxdrv setup
[Code]....
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format
WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format
WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format
FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
I ssh to a remote server which is running in SUSE. And I want to install apache2.0 there. Then I used yast2 to install it. But after installing it, I go to the terminal and type" apache -version" to check if apache is installed there. And it said "-bash: apache: command not found". I don't if I haven't successfully installed it, or I have installed it but just haven't put it into PATH yet. So, my problem is that can anyone tell how to check if I have installed it? If I have installed it, then what is the path of the directory it locates? And if I haven't probably installed it, then can you tell me the how I can installed it? And I am asked to install apache mod_wsgi as well.
View 9 Replies View RelatedI'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
I have installed CENTOS 5.3 on my machine and am running the new version of Subversion which comes bundled with Apache. I noticed in the httpd.conf file there is no module for PHP which is a problem. How do I install the PHP module for APACHE in Centos 5.3?
View 3 Replies View RelatedI installed svn. it works but apache can't load modules
i installed svn using yum :
#yum install subversion mod_dav_svn