I am planning on purchasing a new printer, HP 8500 all in one. I downloaded hplip.net. it is listed in the downloads. Now how do I install hplip? I want to ready for the new printer. Chef Robert Here in the Land Of Enchantment.
View 3 RepliesDeskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
I have been having the issue with my printer, where it will not print using both cartridges, and just mixes the colours to try and make black....I have found the following patch, but would like to know how to apply it?
[URL]
I have now two computers running Fedora 14 64 bit. The previous installation was a couple years ago and i have had no problem getting HPLIP installed - at least not a lot of trouble. This time, however, the install disk has installed the latest version but without a number of its dependencies. The .run shell only tells me that it can't install this or that dependency, in this case sane-backends-devel. When I use the command su -c "yum -d 10 -e 1 install sane-backends-devel" the dependencies are located and the debugger starts. The install proceeds until the more recent libtif 64 bit file is found already on my computer but the desired but older 32 bit version has been set up for install. This stops the business with an error. I have struggled with this until my backend is no longer sane.
I am not sure where to go from here. It looks to me as though the sane-backends-devel dependencies will always prevent an install. Is there a command I could insert to prevent this from happening - such as eliminating the d 10 switch or otherwise? Is there a way to skip one error and go on, for instance? I have not always used the shell to install, and there are several other methods out there, but without this dependency I will not be able to scan, which is what I have to do.
Installing support for Phototsmart 7150 on Ubuntu 10.10 server (no desktop).Installed 3.10.6 and 3.11.3a.
Installation hangs at the point where the printer is supposed to be detected (after the prompt to restart).At that point I break out with Ctrl-C.I then run hp-setup and select usb. That process complains about missing dbus file but prompts for the printing of a test page. The job begins but only a few lines are printed before the page is ejected, some more lines print, the page is ejected and so on.Have tried to uninstall with make uninstall but since there's no desktop I suppose the hp files are in the home folder?Please inform of proper uninstall for my case.I have also installed hplip via the webmin config. That install proceeds smoothly with no errors but print result is same.
How can i install foomatic-rip-hplip in Mandriva?
View 10 Replies View RelatedHow to install software file hplip.run ?
View 4 Replies View RelatedIn short, attached a terminal screenshot of me trying to install hplip. Why hplip-3.9.10.run doesn't recognize the fact that gcc has already been installed? In detail: I have HP PSC 1210 connected to a Windoze XP machine. I want to enable network printing, but the only printer showing up standard in the F12 drivers is the HP PSC 1200. When I use that one, I reach the printer, and the Windoze printer queue, but no matter how long I wait, nothing ever comes out of the printer. It'll start moving like "I'm about to print!" but then does nothing. So through the hp-opensource website I determined which driver I want, and get a long way into installing the file. It hangs up on the attached screenshot.
View 12 Replies View RelatedI have downloaded the hplip command on the desktop, attempted to cd desktop, and it shows "no such directory". running this command so I can set up my printer? And I can't seem to put the screenshot here..
View 9 Replies View RelatedI have an HP printer - C4200 series; Works fine in Slackware.
I am trying to get it to work in mepis-8.
Last thing done: hplip and cups were both un-installed and re-installed with no errors
When I try to install the printer hplip raises the error:
Quote:
printer queue setup failed. Please restart cups and try again.
This was done more that once; the last time after removing and reinstalling both cups and hplip.
I tried to install the printer using cups and get the error:
Quote:
I have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
View 2 Replies View RelatedI have been using ubuntu for a good time and now i want to install opensuse.I have dwnlded the new (11.2) version 2 times but on installing it says unable to create repository. it takes a full day to dwnld here.. please suggest how to use the existing dwnld or a way toget a correct dwnld. i think the earlier one is corrupt.
View 9 Replies View RelatedI see that the latest hplip is by default (3.10.2 in synaptic)great I thought but unlike the 3.10.2 version which was previously downloaded from the web(for 9.04) this default version STILL cannot produce photos without borders? In trying to install the web version (over the default version) which allows for exact printer settings. my printer then went haywire! Its for this reason only that I must go back to windows for HP essential. its a pity because this problem has been known for ages
View 2 Replies View RelatedI would like to upgrade my current hp printer driver 3.10.9 to the latest version 3.11.1 According to 'Google' the command to remove the driver is sudo apt-get remove hplip but when I type this in terminal I get:liz@lizubuntu:~$ sudo apt-get remove hplipReading package lists... DoneBuilding dependency treeReading state information... DonePackage hplip is not installed, so not removed0 upgraded, 0 newly installed, 0 to remove and 12 not upgraded.
I installed 3.10.9 as per the Launchpad website - it looks like Ubuntu is not 'seeing' hplip although it is installed and working. I guess I need a more subtle command to get rid of all the hp driver files. Or could I just install 3.11.1 over the top? (Would have thought best to remove 3.10.9 first).
All of a sudden on startup this morning my systray has disappeared. I had installed "screenlets" and that icon has diappeared as well
View 1 Replies View RelatedAfter the latest updates on my Ubuntu 10.10 the system is unable to connect to my HP all-in-one printer.
I downloaded the latest HPLIP software, it is now sitting in my downloads but I am unable to run the software, when I click on the file the message is "Couldn't add corrupt torrent"
i have troubles using various HPLIP applications (HPLIP toolbox, HP setup, HP systray icon) because it doesn't find QT4. However i have qt4 installed (at least i think so, there are quite a few QT4 packages available, and i can't a metapackage that will install everything needed but qt4core, qt4gui and a bunch others are instlalled. pyqt4 is installed.
View 4 Replies View RelatedI'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
View 1 Replies View RelatedI just built a system and put a fresh install of ubuntu 9.10 on it. I have two other systems with 9.10 as well. On both of them the printer (an HP Officejet Pro 7680 set up directly on the network) is shown as an HPLIP printer with a URI that starts with hp:/net/ . When trying to set up this printer on the new machine the option for HPLIP is not present and the URI starts with dnssd://. I can only set up as and LPD Network Printer or an Appsocket/JetDirect network printer. Yes I have the hplip stuff installed on the new machine. My main concern is actually using the scanner function with Xsane. The other two machines scan just fine, the new one can't find any devices. I think this must be connected with the lack of HPLIP functions. This is with the AMD64 bit version of 9.10
View 1 Replies View Related'tried 5 or 6 solutions on the different threads on hplip - none seem to affect the download of the plugin - always 'no network connection detected'.'Running Lucid on a Dell Optiplex 755 w/ an HP1020. The printer appears to be recognized - show up on admin/printer
View 9 Replies View RelatedI plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies View RelatedI installed a LPT1 printer a hp office jet T65 to add this printer was requested hplip I install the software that should de printer driver, when I print a file the file remain only in processing it wont go forwarder then that.I hope I was explicitly enough.
View 3 Replies View RelatedAnyone knows how to do borderless printing with HPLIP? I have an HP Photosmart C5550. On XP it is able to print borderless (without the white edges on 4 sides) on letter size (both plain and photo paper),but in F13 I always have a white border (~5mm or 0.2 inch) on the 4 sides of plain or photo paper.
Some old postings around 2008 said I should
- run hp-toolbox
- select "Print Settings" tab
- choose "fullbleed" (eg. 1200dpi fullbleed) in "print quality".
When I tried to follow this posting, I see no "fullbleed" selection in F13. Did I miss anything?
I've set up hplip and added a "fax" device. However, when I go into open office and try to fax something, it says it's doing it, then pops up a window saying "step 3 of 5" asking me to add files to the fax (there are no others to add) and only the "cancel" button is clickable. Then in HP Device Manager, it shows the fax as having a job but it never does anything.
View 6 Replies View RelatedI have following setup on my one of the customer where we had suplly thin client. Customer have their old system with SuSE Linux Enterprise Desktop 10.2 with HP LaserJet P1008. They had configure this printer thru foo2xqx & HPLIP 2.8.10. Our Thin Client which we had supplied with SuSE Linux Enterprise Desktop 11.1 & HPLIP 3.10.2.
I am able to install HP printer on my thinclient but thru IPP but, when we fire any print command I am getting "Stopped: /usr/lib/cups/filter/foomatic-rip-hplip failed" error. If I can connect printer on thinclient I am able to print. But, thru IPP share I am not able to print. Also, customer have their old thinclient also on which they share this printer so, I am not able to detach this printer from that system.
Whoever has trouble with hplip GUI mode, install not only qt4 but also python-qt4.
View 1 Replies View RelatedI have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly. .... but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it. I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
How accurate is the ink/toner meter in the HP printer toolkit (hplip-gui)? The meter says my toner level is "good/ok" and displays a black bar with tick marks, but I'm skeptical of its accuracy. I bought this Laserjet P1006 last January, with a starter cartridge of toner that was rated for around 120 pages (if I recall), and have printed occasionally. I'm afraid of running out of toner right when I need to print something important and time-sensitive. Since it doesn't appear to be possible to look inside the toner cartridge (sorry, this is my first laser printer ), I can't do anything except hope the HP toolbox measures my toner level accurately.
View 2 Replies View RelatedI have an HP printer and have installed hplip in the hope of resolving some printing problems and having nicer, more consistent print dialog boxes. Unfortunately it wants dbus-python version .80+ and the current version is .70
I'm aware that centos is about stability and I'm guessing that a new version of dbus-python isn't likely to happen until centos 6-- right? So what's the best option? Can I find a newer dbus-python package that works with centos 5.2 or is that defeating the purpose of the OS? Do I have to choose between stability with printing problems and instability with better printing functionality?
how to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies View Related