Ubuntu Networking :: Cannot Activate Detect Wireless Driver
Sep 28, 2010
I installed ubuntu 10.04 alternate version recently. I am able to install broadcom STA wireless driver for model 4321. Even if it is listed under System>Hardware Driver, it gives me an error when I try to activate it. It asks me to read the file var/log/jockey.log.
I read the file and i found this:
/sys/module/wl/drivers does not exist, cannot rebind wl drivers.
BroadcomWLHandler Enabled(). knod disabled, bcm43xx: blacklisted, b43: blacklisted, b43: blacklisted.
View 5 Replies
ADVERTISEMENT
Feb 4, 2010
I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....
View 9 Replies
View Related
Jul 29, 2011
for over at week i have been trying to get my wireless card to work now. If i open Additional drivers, the non proprietary driver seems to be working and active. If i deactivate that and use the STA driver instead, it says active, but currently not in use. When i use the non proprietary driver, i can check mark on 'activate wireless', but nothing happens. When i use the STA driver there are no wireless options. I'm not sure if its important, but when i do "sudo lshw -C network" when the STA driver is active but not in use, the network status changes from 'disabled' to 'unclaimed'. When i came here, i tried to install "firmware-b43-lpphy-installer" as the sticky said i should, but the installation fails. It says my card is not supported: "Not supported card here (PCI id 14e4:4727)!"
[Code]...
View 1 Replies
View Related
Nov 13, 2010
I have just upgraded to 10.04 and can't get wireless connectivity because the STA driver for bcm4312 fails to activate. Does this sound familiar to anyone? I had had similar problems in 9.10 and tried to install bcmwl-kernel-source which apparently caused errors in the upgrade process. Not sure if this is part of the problem.
View 5 Replies
View Related
Aug 27, 2010
So I just recently migrated from Vista to Linux, I'm running Ubuntu Studio 10.04 on a HP Pavilion DV6700 with a Broadcom BCM 4312 b/g frequencies wifi adapter. I followed one guide telling me to use the hardware drivers program to activate Broadcom STA wireless driver, but whenever i attempt to do so it says "SystemError: InstallArchives() failed". Can anyone help?? (BTW i am not that adept with the Linux operating as of yet)
View 3 Replies
View Related
Mar 9, 2011
Right so I just bought an Acer TimelineX with a Broadcom BCM43225 BCM43225 802.11b/g/n WiFi card. With this card I am not able to detect any wireless networks and after googling around I found out other people have had similar issues. But my problem is kind of unique in the sense that I'm using Backtrack as my Linux distribution (I'm not a blackhat or anything, more of an enthusiast with no malicious intentions) Also I'm not a God at Linux so if you have any solutions please be verbose! I tried the following: [URL] But the Makefile spits out a syntax error. (Makefile:29: *** missing separator. Stop.)
[Code]....
View 7 Replies
View Related
Jul 20, 2010
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
View 9 Replies
View Related
Jan 25, 2010
I just installed ubuntu netbook remix onto a hp mini 1116 nr. i can get the broadcom sta driver to activate and run when boot from the usb, but not from install on the harddrive
View 4 Replies
View Related
Jul 10, 2010
After successfully installing Ubuntu Karmic on a friend's MacBook 3,1 I tried to get the wireless working. On the Live CD, the Broadcom STA driver worked fine, but now that I've finished installing, I'm having problems. The driver is installed, but Hardware Drivers says it isn't enabled. I try to activate it, put in my password, and the "Enabling Driver" dialog pops up for a split second, disappears, and the driver doesn't get activated. I've tried Google to no real avail.
View 1 Replies
View Related
Oct 15, 2010
Basically I'm triple booting Mac SL, Ubuntu 10.10, and Windows 7. Theres reasons for it. So I've installed Ubuntu 10.10 latest release everything works except the Wireless Internet! Wired works. The strange thing is there is a driver for my macbook 13inch 4th gen, but when I try an activate it I get some wired errors I've got a screenshot to make it easier to explain.
View 2 Replies
View Related
Oct 25, 2010
so i got myself in way over my head too soon with Ubuntu but i really like the OS.. I installed 10.10 on my HP laptop according to the directions on [URL]. Everything went well and I had no problems until I came across a thread about aircrack-ng.. I decided to test how vulnerable my own connection was after getting scared by looking up some how-to videos on ..... that made it look a little to easy. I was having a ton of problems with the injections tests and couldnt get it to work. I was trying to patch my ath5k driver according to some threads i found on this forum and couldn't get it to work. I finally found a thread somewhere about editing the base.c file to fix the driver. Well, being a noob i have no idea what i did but it wasn't good... yep, shake your head.. i deserve it haha.. anyway....
When i rebooted the comp after finishing the editing process it came up with all kinds of errors and brought me to a grub rescue prompt.. Yikes!! luckily i had Ubuntu 10.10 on a usb so i restarted, tried to delete the partition it was on with gparted and then tried to reinstall it.. The installation worked and now I can boot into windows again from the grub loader with no problems, but Ubuntu is all screwy.. Windows connects to the internet and doesn't seem to be phased in the slightest bit but ubuntu won't let me stay connected to any wireless networks and I also get a failed message when i try to activate the nvidia driver in Ubuntu.. Man, did i learn a lesson about getting ahead of myself and trying to bite off more than I can chew! I really love Ubuntu and the open source ideal so I don't want to let this sour me..
At the partition select prompt when I reinstalled ubuntu I selected "partition my drive manually" or something to that effect. Should I have installed it along side windows via the other option? I have a feeling my problem was compounded when i tried to erase the partition Ubuntu was on but now I'm totally lost and I really don't want to screw up my comp any more! I figured it's time to ask for help instead of shooting in the dark searching random threads for a similar experience which may not be similar at all.
Is there a way to repartition everything from windows without losing my data and reinstalling Ubuntu? I didn't have anything worth saving on Ubuntu but i have about 100gb worth of stuff on my windows partition i don't wanna lose! If I forgot to add any necessary information let me know and i'll be happy to provide any info I can.
View 4 Replies
View Related
Jan 21, 2011
i have installed ubuntu on my toshiba satellite-L640 and i m facing some problem
1. unable to activate broadband STA wireless driver by additional driver option..
2. unable to activate ATI/AMD propreitary FGLRX graphics driver by additional driver option..
3.my laptop doesnt show battery indication that how much charge is left
4.headphone not working
5.sound of vedios and song is very less in ubuntu then windows..
View 1 Replies
View Related
Oct 6, 2010
Is there a way to activate the Broadcom BCM4322 driver in Ubuntu on a MacBook Pro 5.1? The instructions that I found should work, but don't.I am currently running 2.6.32-24 but would like to install the driver to the 2.6.32-25-pae kernel (the standard kernel uses only 2.7 of 4GB RAM). According to wireless.kernel.org this Broadcom driver is not supported. Do I have to switch to Debian? The other day I installed vpnc, and it works but only over the wired connection. AirPort in Mac OS works, so there is nothing wrong with the hardware.
View 2 Replies
View Related
Jan 15, 2011
I cant get the STA driver activated. I keep getting the error:
Code:
SystemError: installArchives() failed
Synaptic can't mount my install CD, maybe that has to do something with the problem.
[code]....
View 1 Replies
View Related
Sep 3, 2010
when I start Ubuntu with the test CD my wireless works fine/good/explended... but... when I Install ubuntu the wireless does not work? I only need to know how to activate the wireless in ubuntu? In LinuxLime it works fine..
View 3 Replies
View Related
Mar 31, 2010
Broadcom sta driver is installed and listed in Hardware Drivers but will no activate.It did activate and run perfectly when booting from USB FLASH DRIVE running UNR on HP MINI it has a external networkcard power off switch on the front of it if that matters.
View 7 Replies
View Related
Jun 1, 2011
I'm working on an Ubuntu Live 10.10 (Maverick) and I'm trying to make my wireless Broadcom card to work. Installing Ubuntu on the hard disk there's no problem activating it, but unfortunately in the lately I'm working ONLY on the Live version (from a USB Flash drive).
Under Ubuntu Live I tried to Activate the "Broadcom STA wireless driver" but, after downloading, it returns an error saying a very few detailed error:
"SystemError: installArchives() failed"
... and I cannot understand where is the problem or what to do to solve it. I already tried to run "jockey-gtk" with "sudo" but it is not a permission issue. The error came out anyway.
View 2 Replies
View Related
Aug 31, 2009
Have an AR5212 802.11 abg. When I try to activate it, the activate button is greyed ou
View 2 Replies
View Related
Jul 5, 2011
i installed kubuntu 11.04 on my hp-g62 laptop and i'm using a wireless router to connect to the internet.. but i'm unable to use the wireless network. So i would like to know as to how to enable the wireless settings in kubuntu?
View 1 Replies
View Related
Feb 26, 2010
running 9.10 server, have SSH access through LAN, but I'd like to move box out of my neighbor's (shared internet & the router's in his place) and into my own space. Would have done so already, but I can't get the wireless working. Details below:lshw -C network gives:
Code:
*-network:0 DISABLED
description: Wireless interface
[code]....
View 2 Replies
View Related
Sep 26, 2010
I'm been wanting to try Ubuntu for a while now, and when my mom's netbook started to get insanely slow with WinXP, I tried the Netbook Remix on a USB stick. I LOVE it, except I am unable to get the wireless working, which is the only thing stopping me right now from a full install.
I believe my problem is that I need to activate the two drivers "Broadcom B43 wireless driver" and "Broadcom STA wireless driver" which appear as unactivated when I go into the hardware drivers admin tools. Unfortunately this netbook (HP Mini Netbook FW376UA) does not have an Ethernet port, so I can't just temporarily hard wire it to activate these drivers.
So my main questions are: 1) How can I activate those drivers without an internet connection?, and 2) Do you think that activating these drivers is indeed the answer to getting the wireless working?
The details:
Machine: HP Mini Netbook FW376UA
Network Controller: Broadcom Corporation BCM4312 802.11b/g
Ubuntu version: Ubuntu 10.04 Netbook
View 4 Replies
View Related
May 3, 2011
I have a fresh install of 11.04. I am trying to install the "additional drivers" Broadcom STA wireless on my dell laptop. The drivers worked correctly pre-install on the boot up test run, but now they won't activate or uninstall.
On activation attempt, it says : installation of this driver failed. Please have a look at the log.
The log reads: Quote:
2011-05-03 11:49:06,603 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,637 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,679 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code]...
View 9 Replies
View Related
Mar 7, 2009
I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies
View Related
Jan 15, 2010
I have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?
View 2 Replies
View Related
Jul 27, 2010
I've been trying to get Security Spin up and running (after having tried unsuccessfully with knoppix STD). I need to be able to connect to my home network, or hell any wireless network.I've tried using iwconfig wlan0 as well as the options in the Network Configuration panel as well as other related panels. I'm able to change and set up profiles for the wireless card, but not to activate them. The button just isn't clickable.If it helps, I'm running Security Spin from a unetbootin usb drive. The wireless card is identified by the system as "Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection" .
View 2 Replies
View Related
Sep 8, 2009
I just recently installed CentOS 5.3 and to make a long story short I found the entry for my wireless card under the network settings but when attempting to activate the card the system locks up. I have to reboot at that point as nothing responds (keyboard, mouse, etc..).
Running the command /sbin/lspci -v reveals the following about the wireless card:
01:00.0 Ethernet controller: Realtek Smeiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
View 3 Replies
View Related
Jun 20, 2010
I recently downloaded Ubuntu 10.04 into my Windows Vista laptop & I have downloaded the one that can run alongside my current system, so I'm running dual OS. At the start up screen where I choose the OS, I choose Ubuntu & it loads fine. Everything looks perfect except that it won't connect to or detect any wireless connections. I have tried clicking the Network Manager icon & clicking New Connection. I typed in the SSID & security key for my wireless connection/router & after I hit create, a small window pops up saying "Wireless Disconnected: you are now working offline" or something like that. Nothing happens/changes. There is no internet connection on Ubuntu OS. But when I switch over to my Vista OS, the internet works perfectly (obviously.)
View 1 Replies
View Related
Feb 2, 2011
not connect to hotspot via wireless..i was check via console terminal "ifconfig wlan1 up" but not display message.. i have used network tool via gui but i don't know how to setting this wireless.. iam using ubuntu 10.04and my netbook specification is:
Cipset : Intel
Prosesor : Intel atom 1.66 GHz, 667Mhs FSB Cache 512 KB
Hardisk : WDC 250 GB
[code]...
View 1 Replies
View Related
Jun 26, 2011
I have hp q 610 ubuntu 10.10 can't detecte wirless whatshould i do?
View 2 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
