Software :: Dropbear Dbclient Dropbearkey Dropbearconvert Scp Does Not Work On Arm9?
Dec 29, 2010I compiled dropbear with arm-linux-gcc version:Quote:
arm-linux-gcc -v
Using built-in specs.
Target: arm-none-linux-gnueabi
[code]....
ADVERTISEMENT
General :: Install Gcc To Arm9 Board?
May 13, 2010i installed linux OS on my lpc3131 board with kernel 2.6.20. I want to install gcc to my board in order to compile codes without cross compiler or auxilary PCs. But i think it must be different then installing gcc rpm on Fedora PC or untar and make gcc, I dont know what i must do. what release or version of gcc should i download and what kind of changes must i do in Makefile.
View 5 Replies View RelatedProgramming :: Toolchain For ARM7 And ARM9?
Jul 2, 2010Is there any difference between an ARM7 toolchain and an ARM9 toolchain? Or is it all ARM toolchain can be used to compile for these different processors.
View 5 Replies View RelatedGeneral :: Develop Embedded In ARM9 Controller?
Nov 14, 2010But started to develop Embedded linux in ARM9 controller.
View 12 Replies View RelatedSoftware :: Cross Compiling Sqlite On Arm9
May 28, 2010i am trying to compile too the sqlite for arm9 - mini2440.could you please tell me what was the steps you make? im read that book but im still having some trouble while i compile i have been trying to do the compilation.
View 3 Replies View RelatedProgramming :: How To Compile Mysql For Arm9 Linux
Jan 3, 2011I want to compile mysql for arm9 linux box, I did not find any good resource.
View 5 Replies View RelatedGeneral :: Compress The Size Of ARM9 Executable File
Apr 28, 2011i am using classpath-0.98,jamvm-1.5.4 and arm9 cortex processor. so my question is after install classpath and jamvm on arm9 , i am getting around 30MB FAT file. so tell me some tips how to reduce the size of FAT file as much as possible.
View 1 Replies View RelatedSoftware :: Cross Compiling Works With Dependencies Arm9 Cpu?
Jul 5, 2010I'm a newbie when it comes to embedded linux / cross compiling. Never had to have anything to do with it b4 I bought my NAS. The Nas only has a 500MHZ ARM9 so compiling anything is painfully slow. Also only has 128MB ram. I managed to cross compile the kernel but am not sure how would you cross compile something like HPLIP for example.
View 1 Replies View RelatedProgramming :: Start To Develope Applications For ARM9 Board?
Aug 26, 2010i wanna do somthing in this can any one help me how i have to start with linux and how to proside to develop some small applications its very much essential for me. give me a guide path with that i have to get things ASAP.
View 1 Replies View RelatedRed Hat / Fedora :: Compilation Error In Module With ARM9 For IO - Invalid Option `64'
Dec 13, 2010We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
General :: SMP Kernel Would Work With Single Processor / Work With Multiple Processors System?
Feb 10, 2010If I have SMP kernel would it work with single processor or only work with multiple processors system?
View 6 Replies View RelatedUbuntu Multimedia :: Creative Webcam Doesn't Work - How To Make It Work
Feb 17, 2011how to make creative web cam working with ubuntu
View 1 Replies View RelatedNetworking :: DNS Lookup Doesn't Work, Ping, Firefox Will Not Work Properly?
Apr 23, 2009I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View RelatedSlackware :: Get Rtsp:// In Firefox To Work \ (adding Entries In :config Does Not Work)?
Feb 2, 2010I have followed the instructions at http://www.vcn.bc.ca/~dugan/setting-up-slackware.html (under "Making Firefox Perfect"), but I still get the error message"Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
View 13 Replies View RelatedUbuntu :: Wireless Does Not Work + Printer Drivers So Buggy + MP3 Players And Digital Cameras Not Work?
Jul 7, 2010I wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
Ubuntu Multimedia :: Skype - Pulseaudio - Sound Output Or Input Does Not Work At All Doesn't Work
Sep 11, 2010When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
Ubuntu Multimedia :: Flash Controls Don't Work - How To Make Them Work
Apr 8, 2011I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
Networking :: New Install Of Centos 5.5 Will Not Work On Net Work With Fixed IP Or DHCP
Jan 12, 2011I am trying to set up an unused machine as a web server for my students.
I originaly tried with Redhat 9 and had the same problems. I am using an HP Pentium 4 system with 2 network cards.
1) The built in Realtek RTL8139 configured as eth0.
2) An add in Broadcom BCM5782 Gigabit card that was added I presume when the built in card failed (we have a number of machines like this around the school), configured as eth1.
I did not realize the second card was installed when I had Red hat 9 on the system, but I discovered it after installing centos 5.5. I have tried to configure the system to use DHCP with and without getting the DNS from the provider, and both ways the system complains that there is no connection, check the cable, so it will not activate the device.
When I configure the device to use a fixed IP, I can configure the device, but I can't ping anything on the network other than myself. I suppose it is possible that both network cards have failed, but I get green link lights with both cards, when I connect them to my router, so I am at a loss as to why neither board seems to work. I don't have a spare network card to slide in because the computer takes a special mini card. Is there an easy way to test the board to see if the board is a problem?
General :: Mail() Function Doesn't Work With HOTMAIL But Its Work With Others?
Apr 27, 2011i have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies View RelatedUbuntu Servers :: Get Sobdomains To Work Fine On A Test Mache, But Domain/site To Work Due To Lack Of DNS Support At The Moment?
Feb 6, 2011I'm not to sure this is the place I should post this, but couldn't find any place for it to fit. So here is the deal..I am running 10.10 with the standard LAMP setup. I am running a drupal 7 site no problems. What I need to do is run a multi site sub directory. (domain.com/newsite). So far the best I can do is get a directory index of the second site (domain.com/newsite), but cant run the installer. (I did the symbolic link to the doc root of the drupal install.)If I type in the url domain.com/newsite/install.php I get not found. I placed an index.html test page and it renders fine. I think I'm close but just not there yet.
Any ideas from anyone? I can get Sobdomains to work fine on a test mache, but sadly I need the domain/site to work due to lack of DNS support at the moment. I tried to get some info from the drupal forum, but everything always points to subdomin setups. I also posted over there, but it seems like the forums have very little support and are a bit on the slow side.
[Code]...
Ubuntu :: Compiz Doesn't Work - How To Make It Work
Jul 29, 2010I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View RelatedUbuntu :: Hibernate Doesn't Work - How To Make It Work
Oct 29, 2010When I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies View RelatedUbuntu :: Unity Doesn't Work - How To Make It Work
Feb 16, 2011I just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
Ubuntu :: Configure Evolution To Work With MS Exchange But Cannot Get It To Work?
Apr 20, 2011I am trying to configure evolution to work with MS Exchange but cannot get it to work. I also have an android phone which is dead easy to configure, but I've tried so may settings but cannot get evolution to connect. Anyone also having had this problem and finally solved it? I also tried DavMail with no luck.
View 6 Replies View RelatedDebian :: Usb Stick Don't Work - How To Make It Work
Jan 14, 2011I just installed Squeeze_di_rc1, whit gnome, when i insert any usb stick i recive how can i solve it?At the same times i tried to format in fat 16 with gparted but the result is the same.
View 6 Replies View RelatedFedora Installation :: Used To Work Flawlessly In F14 Now Does Not Work In F15
May 29, 2011What used to work flawlessly in F14 now does not work in F15. I have done a fresh installation of F15 and all seemed to go well other than a few minor tweaks. In F14 I had an /etc/fstab file that worked well but in F15 does not work. I have 3 external USB drives, mybook, black & StoreIt. With F14 my fstab worked very well and booted regardless of weather or not any particular drive was connected at any given time. Typically I have the mybook and black connected at home and the StoreIt connected at work, but regardless it would boot and work without any problems.
[Code]...
Debian :: Get Sendmail To Work With Php But Can't Even Seem To Get To Work On It's Own?
Mar 27, 2010I'm trying to get sendmail to work with php but i can't even seem to get it to work on it's own. I'm logged in as root (su root). I have in php.ini: commented out smpt and smtp port (win 32 only it says) and sendmail_from commented out
For unix only
sendmail_path=/usr/lib/sendmail
sendmail seems to be installed i can run it from bash. I try sending an email using:
sendmail example@whatever.com
message
ctrl + D
which i saw somewhere however the email doesn't seem to go through. I've also tried (after restarting apache server) to use mail() php function and that also doesn't work. Any ideas?
General :: Flash And Quicktime Movies Don't Work; Mgp And Wmv Movies Work Fine?
Jan 9, 2011As far as I can tell, I have all the applicable applications and plugins (for this, Debian 5.0.6 installation). I type in Code:about:plugins in either iceweasel or epiphany browser and get a list that includes:
Code:
Installed plugins
Find more information about browser plugins at mozilla.org.
[code]...
Debian :: W-Lan Won't Work
May 10, 2011I used to be an Ubuntu user(yeah, shame on me), so I basically migrated to Debian. Without much further ado I want to come to the problem which I am facing.I am currently using "Squeeze" 6.0 with the AMD64-Architecture. I'm trying to connect to the Internet via the T-Home Surfstick W 102, I've also got the drivers for it I just don't know if they work under Linux. "lsusb" gives me the following: Bus 001 Device 004: ID 083a:d522 Accton Technology Corp. Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter
I downloaded Ndiswrapper to see if I can establish a connection but whenever I tried to install it I got the following error: "makefile:34 cannot find kernel version in etc. , is it configured?".(I hope I followed the instructions correctly in the file). Then I tried to install the drivers using Wine but I guess it was pointless 'cause the programme does not start.
Fedora :: How To Yum Work
Nov 13, 2010i want to know that how yum work.complete details how a software is installed by yum install software
View 3 Replies View Related