Debian :: Get Sendmail To Work With Php But Can't Even Seem To Get To Work On It's Own?
Mar 27, 2010
I'm trying to get sendmail to work with php but i can't even seem to get it to work on it's own. I'm logged in as root (su root). I have in php.ini: commented out smpt and smtp port (win 32 only it says) and sendmail_from commented out
For unix only
sendmail_path=/usr/lib/sendmail
sendmail seems to be installed i can run it from bash. I try sending an email using:
sendmail example@whatever.com
message
ctrl + D
which i saw somewhere however the email doesn't seem to go through. I've also tried (after restarting apache server) to use mail() php function and that also doesn't work. Any ideas?
View 3 Replies
ADVERTISEMENT
Nov 14, 2010
I'm new to Linux which just installed a new virtual CentOS server to try RANCID to pull router configuration and I succeed to pull out the configurations as I wish, but I failed to receive a notification email from the server.After a few tries, I realize that I need to configure sendmail to work with RANCID to send an email! And I also tried to configure sendmail files, but failed..I totally blank and don't how to configure sendmail, anyone here can guide me? What is the must to configure to make sendmail to work with RANCID? Do I need to configure my server as mail server?1. A server that I configured a sendmail is called mail server?2. What is my mail server's name and domain name? . lnx-svr01.site.net, lnx-svr01 is my mail server name and site.net is my domain name
View 5 Replies
View Related
Jan 28, 2010
I used fedora12 builded mail server uning sendmail and dovecot at my home, when I at home everything are works fine, no matter I sent email to hotmail, or hotmail sent to my mail server, but I got the problem that I can't access my home server when I at office, the error messages as below:
#telnet xxx.xxx.xxx.xxx 110
-ERR Cannot connect to POP server xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx:110), connect error 10061
#telnet xxx.xxx.xxx.xxx 25
[code]....
P.S there is no firewall between the my office and home
View 3 Replies
View Related
Apr 28, 2010
I'm Trying to setup Sendmail to work with my domain in my server which is :
Code: Linux Centos 5.4 My server can send mail locally to users in my Linux Box and it can receive mails from yahoo and other mail providers in the web, but when i try to send mails to yahoo or others it send me some mail delivery message which is :
[Code]...
View 8 Replies
View Related
Apr 2, 2010
Sendmail does not work anymore.
//deinstaled everything
[root@localhost ~]# top -b -n1 | mail -s 'Process snapshot' mymail@mymail.net
/usr/sbin/sendmail: No such file or directory
//reinstaled everything, restart sendmail
[root@localhost ~]# top -b -n1 | mail -s 'Process snapshot' mymail@mymail.net
[root@localhost ~]# /etc/mail/submit.cf: line 544: fileclass: cannot open '/etc/mail/trusted-users': World writable directory
//fixed that with '-o' in /etc/mail/submit.cf, restart sendmail
[root@localhost ~]# top -b -n1 | mail -s 'Process snapshot' mymail@mymail.net
// in mail.log:
Apr 2 12:49:16 localhost sendmail[6252]: o32AnGis006252: to=mymail@mymail.net
, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=49856, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
//test
[root@localhost ~]# telnet localhost 25
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
//commented out #O DaemonPortOptions=Port=smtp,Addr=127.0.0.1, Name=MTA
//in sendmail.cf, restart sendmail
//test
[root@localhost ~]# telnet localhost 25
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
View 11 Replies
View Related
Aug 6, 2010
I am looking for the syntax for a sendmail ruleset to log the message subject to the syslog service. I have found a few posts on the web, but none seem to work. The basic appear to be - add the following to the sendmail.mc file then compile the sendmail.cf file using M4. The syntax suggested follows (I believe the rewrite rule is incorrect)(I and using <T> to indicate tabs):
LOCAL_CONFIC
Klog syslog
HSubject:<T>$>Check_Subject
LOCAL_RULESETS
SCheck_Subject
R$*<T>$:<T>$(log Subject=$1<T>$)<T>$1
sendmail.cf compiles and when used as the config file for sendmail - everything appears to work, but no subject is logged.
View 8 Replies
View Related
Aug 3, 2010
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
View 1 Replies
View Related
Jan 14, 2011
I just installed Squeeze_di_rc1, whit gnome, when i insert any usb stick i recive how can i solve it?At the same times i tried to format in fat 16 with gparted but the result is the same.
View 6 Replies
View Related
Nov 15, 2010
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies
View Related
Feb 10, 2010
If I have SMP kernel would it work with single processor or only work with multiple processors system?
View 6 Replies
View Related
Feb 17, 2011
how to make creative web cam working with ubuntu
View 1 Replies
View Related
Apr 23, 2009
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies
View Related
Feb 2, 2010
I have followed the instructions at http://www.vcn.bc.ca/~dugan/setting-up-slackware.html (under "Making Firefox Perfect"), but I still get the error message"Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
View 13 Replies
View Related
Jul 7, 2010
I wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
View 4 Replies
View Related
Sep 11, 2010
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
View 3 Replies
View Related
Apr 8, 2011
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
View 3 Replies
View Related
Jan 12, 2011
I am trying to set up an unused machine as a web server for my students.
I originaly tried with Redhat 9 and had the same problems. I am using an HP Pentium 4 system with 2 network cards.
1) The built in Realtek RTL8139 configured as eth0.
2) An add in Broadcom BCM5782 Gigabit card that was added I presume when the built in card failed (we have a number of machines like this around the school), configured as eth1.
I did not realize the second card was installed when I had Red hat 9 on the system, but I discovered it after installing centos 5.5. I have tried to configure the system to use DHCP with and without getting the DNS from the provider, and both ways the system complains that there is no connection, check the cable, so it will not activate the device.
When I configure the device to use a fixed IP, I can configure the device, but I can't ping anything on the network other than myself. I suppose it is possible that both network cards have failed, but I get green link lights with both cards, when I connect them to my router, so I am at a loss as to why neither board seems to work. I don't have a spare network card to slide in because the computer takes a special mini card. Is there an easy way to test the board to see if the board is a problem?
View 2 Replies
View Related
Apr 27, 2011
i have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies
View Related
Feb 6, 2011
I'm not to sure this is the place I should post this, but couldn't find any place for it to fit. So here is the deal..I am running 10.10 with the standard LAMP setup. I am running a drupal 7 site no problems. What I need to do is run a multi site sub directory. (domain.com/newsite). So far the best I can do is get a directory index of the second site (domain.com/newsite), but cant run the installer. (I did the symbolic link to the doc root of the drupal install.)If I type in the url domain.com/newsite/install.php I get not found. I placed an index.html test page and it renders fine. I think I'm close but just not there yet.
Any ideas from anyone? I can get Sobdomains to work fine on a test mache, but sadly I need the domain/site to work due to lack of DNS support at the moment. I tried to get some info from the drupal forum, but everything always points to subdomin setups. I also posted over there, but it seems like the forums have very little support and are a bit on the slow side.
[Code]...
View 9 Replies
View Related
Jul 29, 2010
I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies
View Related
Oct 29, 2010
When I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies
View Related
Feb 16, 2011
I just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
View 2 Replies
View Related
Apr 20, 2011
I am trying to configure evolution to work with MS Exchange but cannot get it to work. I also have an android phone which is dead easy to configure, but I've tried so may settings but cannot get evolution to connect. Anyone also having had this problem and finally solved it? I also tried DavMail with no luck.
View 6 Replies
View Related
May 29, 2011
What used to work flawlessly in F14 now does not work in F15. I have done a fresh installation of F15 and all seemed to go well other than a few minor tweaks. In F14 I had an /etc/fstab file that worked well but in F15 does not work. I have 3 external USB drives, mybook, black & StoreIt. With F14 my fstab worked very well and booted regardless of weather or not any particular drive was connected at any given time. Typically I have the mybook and black connected at home and the StoreIt connected at work, but regardless it would boot and work without any problems.
[Code]...
View 1 Replies
View Related
Jan 22, 2011
I'm trying to install Debian on Dell XPS L501, and there are lots of problems...
1- Resolution is 800x600! I guess, I need to add that there is no xorg.conf file, and I couldn't create it by running `Xorg -configure`. It said the number of screens didn't match number of detected devices or something like that! I'd be really happy if this gets solved!
2- Ctrl+Alt+F1/2/3/4/... doesn't work! Sometimes Alt+Directional keys works. but most of the time it doesn't!
3- I can't get the loud speakers to work, and I couldn't compile Alsa from source... I'll try again, but does anyone know if there is a specific package I need to install to get them to work? (Realtek ID 665)
4- Keys are not working right... Function keys don't work... But the worse thing, is that if let's say Fn+F2 is supposed to disable wireless, F2 does!
View 5 Replies
View Related
Feb 10, 2011
I was wondering if Debian Net install would work on a Dell machine. Because when I installed Windows on it I had actually go online with my other computer to find the damn dell drivers. So just wondering if Debian would detect the dell devices and actually have drivers for it.Yes, I realize it's probably a completely stupid question.
View 7 Replies
View Related
May 10, 2011
I used to be an Ubuntu user(yeah, shame on me), so I basically migrated to Debian. Without much further ado I want to come to the problem which I am facing.I am currently using "Squeeze" 6.0 with the AMD64-Architecture. I'm trying to connect to the Internet via the T-Home Surfstick W 102, I've also got the drivers for it I just don't know if they work under Linux. "lsusb" gives me the following: Bus 001 Device 004: ID 083a:d522 Accton Technology Corp. Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter
I downloaded Ndiswrapper to see if I can establish a connection but whenever I tried to install it I got the following error: "makefile:34 cannot find kernel version in etc. , is it configured?".(I hope I followed the instructions correctly in the file). Then I tried to install the drivers using Wine but I guess it was pointless 'cause the programme does not start.
View 5 Replies
View Related
Apr 10, 2009
I just installed a fresh copy of stable Debian, and apt-get installed Iceweasel and Tor/Privoxy (apt-get install tor automatically obtains Privoxy). I went into /etc/privoxy/config and uncommented the socks4a line that makes Tor and Privoxy work together. I made sure /etc/init.d/tor and /etc/init.d/privoxy were both started, Then I got iceweasel-torbutton with apt-get. I fired up Iceweasel and turned on Torbutton, but after a while I get the Privoxy page error with every website I go to. I tried doing "torify iceweasel" in the terminal, but I get the same Privoxy page error. What settings do I need to change?
View 8 Replies
View Related
Feb 8, 2011
Has anyone got Weatherbug to work on debian 6 yet? downloaded and install full java and it works.
View 1 Replies
View Related
Feb 20, 2011
I would ask how automounting of devices works in debian. I'm trying to modify the name of automatic mount point from the label name of devices (or their UUID) to the devices name. That because the UUID is often a very complicated string, meanwhile the label often contains spaces; so become difficult working with theme in scripts...
View 7 Replies
View Related
