I need to install libssh2 on my CentOS 32bit server to get ssh2 extension of PHP working, after installation of this rpm, I still can't run "pecl install ssh2-beta" because it give me this error: configure: error: The required libssh2 library was not found. You can obtain that package from [URL] ERROR: `/tmp/tmp2ImZz1/ssh2-0.11.0/configure --with-ssh2=/usr' failed
View 1 RepliesI just recently upgraded from 11.3 to 11.4 (via zypper dup after adding the 11.4 repositories, no problems there besides the usual ATI HD2400XT video driver issues I _always_ have). I then installed VirtualBox. VirtualBox refused to start with the following error:
pk1048@img:~> VirtualBox
VirtualBox: Error -610 in supR3HardenedMainInitRuntime!
VirtualBox: dlopen("/usr/lib/virtualbox/VBoxRT.so",) failed: /usr/lib64/libcurl.so.4: undefined symbol: libssh2_knownhost_init
VirtualBox: Tip! It may help to reinstall VirtualBox.
pk1048@img:~>
and the advice to reinstall VirtualBox seems misplaced. The problem appears to be an incomparability between the installed libcurl and libssh2 as follows:
pk1048@img:~> ldd -r /usr/lib64/libcurl.so.4
linux-vdso.so.1 => (0x00007fff2c59d000)
libidn.so.11 => /usr/lib64/libidn.so.11 (0x00007fb03c2d9000)
libldap-2.4.so.2 => /usr/lib64/libldap-2.4.so.2 (0x00007fb03c092000)
librt.so.1 => /lib64/librt.so.1 (0x00007fb03be88000)
code....
And yast online update claims that both are up to date, in fact these appear to be the only versions of these packages in the 11.4 repositories.
Alright so, I ran everything, and when I go to compile my libssh2 using: phpize && ./configure -with-ssh2 && make
View 1 Replies View RelatedI am trying desperatly to install boxee onto my pc Boxee - Watch Movies, TV Shows and clips from the Internet on your TV.without success.I have downloaded the source code from the site and have ran
./bootstrap
./configure
The ./configure last few lines =
checking for boost/shared_ptr.hpp... yes
checking for main in -lGL... no
configure: error: Could not find a required library. Please see the README for your platform.
I'm not sure what this lGL is referring to. The readme states that I need the below to run the configure, though that doesn't say lGL either?
Build-Depends: debhelper (>= 7.0.50), quilt, python-support, cmake,
autotools-dev, autoconf, automake, unzip, libboost-dev,
libgl1-mesa-dev | libgl-dev, libglu-dev, libglew-dev, libmad0-dev, libjpeg-dev,
libsamplerate-dev, libogg-dev, libvorbis-dev, libfreetype6-dev,
libfontconfig-dev, libbz2-dev, libfribidi-dev, libsqlite3-dev,
code....
I've created 3 files: swap.h and swap.c then make static library from it
Code:
Then I write 2 program to test this library: test_swap.c and test_swap.cpp
I compile
Code:
What's wrong with this in C++? And how can I make a library that can work both for any C and C++ program?
Here the source code
Code:
Code:
Code:
I tried to compile one software. After I typed "./configure", there is an error:error: GSL CBLAS library not foundI installed GSL 1.9 library --- When I was installing, it was like this:
make install
Making install in gsl
make[1]: Entering directory `myDir/gsl-1.9/gsl'
[code]....
How to fix this error :
Code:
checking for Qt4... no
configure: error: The QtCore library >= 4.3.0 could not be found.
configure: error: readline library not found If you have readline already installed, see config.log for details on the failure. It is possible the compiler isn't looking in the proper directory. Use --without-readline to disable readline support. Now I tried to yum install readline-devel and the result was failure as below:
Quote:
[root@localhost ~]# yum install readline-devel-6.0-3.fc12.i686.rpm
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[code]....
So I am thinking that maybe I have to tell configure where my readline libraries are. From the above, it looks like readline-6.0 is not on my computer, even though I went through the configure/build/install process for it.
m using fedora 13 gnome while installing glib m getting error
configure: error: *** Working zlib library and headers not found ***
I get an error loading libraries, even though PATH and LD_LIBRARY_PATH seem to be correct. Here are the details:
[Code]....
I need to create a test setup in my lab that will run power supplies for an indefinite amount of time. It could be anywhere from days to months at a time. This rules out matlab, as its memory leaks won't let it run that long, and LabView is too buggy (at least in my experience. and it has memory leaks as well). So I need a way to program GPIB (since that is the interface these power supplies have). So far, PyVISA seems to be the most likely way to be able to do this.
However, I keep receiving the following error:
Code:
pyvisa.visa_exceptions.VisaIOError: VI_ERROR_LIBRARY_NFOUND: A code library required by VISA could not be located or loaded.
Searching around, this apparently means that I'm missing GPIB drivers, but I'm not.
linux-gpib installed, and the card appears in /dev.
That being said, every now and then the gpib interfaces simply disappear from /dev,and the only way I can get them back is to reinstall linux-gpib. Also, has anybody else succeeded in working with GPIB outside of LabView and Matlab, and if so how? I'm also open to other options, having made no progress on this after over a week. The two real requirements is that I need programming interface to be scpi commands, and I would prefer to code in python or C/C++.
is there a way to specify that I need a 32bit version of a certain library on the "Requires" line of a SPEC file?Since my software contain (a lot of) binaries from other sources (not always RPM compatible) I had to do "AutoReqProv: No" so I can do it manually.Is there a way to explicid say that I need the 32bit version of some library?
View 1 Replies View RelatedCan someone please tell me what packages are required for compiling source on Slack 13? Something is missing in my box and I get errors, I can't figure out what it is.
View 11 Replies View RelatedI'm trying to learn how to cross-compile libraries (static and shared) and executables for the Blackfin + uClinux environment.At this point, I can successfully compile a stand-alone "Hello, world" but fail when trying to add a (static) library to the mix.Here's the source code I wrote:
Code:
#========== bar.h
void mytestfunc(void);
#========== bar.c
#include <stdio.h>
[code]...
Googling for this returns talks about "name mangling", but I don't know if this is what it is, and how to change the source/command to solve it.
I am trying to use the QT4 frontend of poppler library in my application so I need to compile the library.In its main directory ./configure can be run but I got
Code:
checking which font configuration to use... fontconfig
checking for FONTCONFIG... no
configure: error: Package requirements (fontconfig >= 2.0.0) were not met:
No package 'fontconfig' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables FONTCONFIG_CFLAGS
and FONTCONFIG_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
I have fontconfig installed (ubuntu):
2.8.0-2.1ubuntu3 (fontconfig)
However I have no idea where those flags are and what to set them to.
I have tried to compile several programs from source code and have into a similar error in each case. I try make the program and I get an error like: fail program confsdefs.h. Reading further into the log file, I see there is a long list of missing library files when I compile something like Samba 3.5.x:
[Code]...
I have searched for dependency information and used apt-get to add anything I can find. How can I identify and find the dependencies for source? I have checked the source documentation though typically does not list required packages. My other question is how to check the path used to locate the libraries? Given the length of the missing library list, I think the problem may be configuring make.
I'm interested in modding an open-source turn based game called Advanced Strategic Command or ASC, but to do that I need bunch of libraries. Installing those libraries is very easy in linux, I know but the thing is I'm working with windows in which the building of the libraries is a bit more complex, as you probably know. One of those libraries is the ligsigc++, I'm using VC++ but haven't been successful in building the libsigc++ in VC++. I considered making my life easier with Cygwin (a unix shell for windows) and simply executing ./Configure, Make. I's worked like a charm and the library dll it produced is named cygsigc-2.0-0.dll which made me wonder is compiling a library in cygwin to be linked with VC++ perfectly ok? That is is there any difference in compiling in cygwin and VC++?
View 2 Replies View RelatedI was wondering if there is an argument I can pass to the configuration file to have it use a library from a non-standard path to compile with - for example I would like it to use my perl located in /scratchbox/users/jeff91/usr/bin/perl instead of the standard /usr/bin/perl
View 3 Replies View RelatedFedora 14 I recently went to install some software using the source files. When I ran the command ./configure I got a message saying that No package gthread-2.0 not found After searching the internet some one had the same problem. I needed to install a package called glib2-devel However, rather that searching the internet. Is there any yum command that can give me that information?
View 2 Replies View RelatedI am working with Ubuntu 10.04 I can't print documents on HP Laserjet 1020 While printing, the jobs shows up in the print queue and disappears without any error, but no printout I tried to install HPLIP 3.10.6 from [URL]I followed the instructions but it ends with the error
Code:
INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
warning: There are 5 missing REQUIRED dependencies.
note: Installation of dependencies requires an active internet connection.
[code]....
For a program, I am getting
GCC_4.2.0' not found (required by /usr/lib/libstdc++.so.6)
on a Debian AMD64 machine. I am guessing the most likely issue is that the program is linked against this library but the necessary object files are missing on my system.
I try to install simulation package Espresso. When I configure I have following error message.
checking for libtcl8.5... no
checking for libtcl8.4... no
checking for libtcl8.3... no
[code]....
iwant to install julius 3.5.2 on my system but i have an error after compiling the file configure the error is flex library is not found so what i have to do
View 3 Replies View RelatedAlright story is: i needed apache tom cat to work on my project, i don't wish to install it in ubuntu so i can keep my system clean and fast. I installed virtual box OSE. Do i need a disk to run? Cause it says "Fatal no bootable medium found system halted" Edit: alright i inserted my winxp disk and now it is installing, i need to know if any change i make will damage my computer? Since i allocated only 10GB to this virtual disk, now it is formatting it in NTFS...i hope it won't have any conflict with ubuntu's ext4 file system.
View 2 Replies View RelatedConfiguring postfix for getting gmail account and we make ssl certificate for this.
File not found ssl
while giving this command:
whereis ssl
ssl:
ssl library file not found ....
Linux- openSuse 11.1
Am I trying to make a few modifications to 'Cheese.' When I run the ./configure command the only program that I am having a problem installing is libebook-1.2. The Yast function has found everything but libebook. I went out to find a RPM, got one from [URL] and [URL]. Every install I try has only led to errors. I have had multiple errors. Now when I download a file, it will not do an auto-install. I have also tried rpm -i package. no such luck there either.
I've trying to compile conky 1.7.2 in slack 13 with lua-cairo and lua-imlib2 bindings, have lua 5.1.4 installed and also installed tolua++-1.0.93 from der site installed it through scons..
here's my config_linux.py
Code:
## This is the linux configuration file
# This file was adapted to be used with ArchLinux
# Use 'scons -h' to see the list of command line options available
# Compiler flags (based on ArchLinux's installation of lua)
#LINKFLAGS = ['-g']
CCFLAGS = ['-O2', '-ansi', '-Wall' ]
[Code]...
I am trying to compile the source code for Mudlet, a MUD client, on Fedora 13 64bit and I keep running into linking errors at the end of the compilation. Here is the latest:
[Code]...
This makes me think that the yajl library was not found. I have both the yajl and yajl-devel packages installed:
[Code]...
Should I be using a different library specifier other than -lyajl, perhaps?
In the process of installing DDD, I get the following error:The X11 library could not be found. Please use the configure options '--x-includes=DIR' and '--x-libraries=DIR' to specificy the X location.I did a "yum install libx11-devel". I was told that the right package was installed
View 1 Replies View Relatedi was wondering if there is away to avoid application from closing if a specific library not found? for example: if my application uses libPng and it wasn't found on the system running my app (binary and not source), is there anyway to just disable the part that uses png from my application?
View 14 Replies View Related