I am configuring phpBB3 on a Fedora 14, php 5.3, and Apache 2 and I am having trouble setting permissions on certain directories and files. I have chmod 777 the following contents and still get the unwritable error:
cache/: Found, Unwritable
files/: Found, Unwritable
store/: Found, Unwritable
config.php: Found, Unwritable
images/avatars/upload/: Found, Unwritable
I just recently built a new linux server Redhat Enterprise Linux 6 and installed Samba version 3.5.4-68.el6.I copied a configuration file from an old Linux Server (Redhat Enterprise Linux 3.0AS) with a properly running Samba version 3.07131 . To make sure that everything will be ok, I created the same group and added the users on that group and created the same directories with the file name and attributes as that of the old server. Evrything seems fine as I can see all the shared folders on the windows XP and windows 7 Machines until I tried to write something on those folder. I keep getting the message that the action is denied and I need permission to perform that action. I do not know what to do next, hence this post.Below is the copy of my configuration file.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
[code]....
Occasionally, with no warning and no cause that I've been able to see, everything that I try to open will produce an error message saying that an associated configuration file For example, I try to open dolphin, and I get a message saying: 'Configuration file "/home/<user>/.kde/share/config/dolphinrc" not writable. Please contact your system administrator.' I get similar ones for konsole, open office, and everything else I try to open, except firefox, which I installed by hand. Konsole still works after this error, but dolphin and open office do not. This never happens directly after startup (it usually happens about an hour after), and always happens to everything - I never get this message for just one program, while everything else works fine. I've tried deleting /home/<user>/.kde/ to 'reset' kde, but that hasn't helped. In case it helps, I'm running Squeeze (amd64) with kde 4.4.5.
View 12 Replies View RelatedI'm trying to install iw-0.9.19 on xubuntu.When i type the command "make", i get:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop.
[code]....
Trying to install Cinepaint from a tar.gz file. Running ./configure brings up the above error. Where do I get gtk-config from?
View 3 Replies View Related I just installed Netsurf, but I was confronted with "libnsbmp is not installed". So I installed libnsbmp.
The error "libnsgif is not installed" appeared when installing libnsbmp.
The error "libpng is not installed" appearded when installing libpnf.
...
I installed all that I was asked to install. However, when I was installing libcss, it said that "Package libparserutils was not found in the pkg-config search path. Perhaps you should add the directory containing 'libparserutils.pc' to the PKG_CONFIG_PATH environment variable". I have already installed libparsercutils but not in the /usr/lib dir.
What should I do to continue my installation? And anyone could tell me what are those lib stuff? I installed zlib with the apt-get install command.Can I get other lib stuff with the same command?
I have xubuntu 9.10 and I'm trying to install iw-0.9.19.When I use the command "make" I get this error:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop. I read the Readme file and it says: "To build IW, just enter make. If that fails, set the PKG_CONFIG_PATH environment variable to allow the Makefile to find libnl". I guess the problem is linking Makefile (in iw-0.9.19 directory) to libnl (version 1.1 correctly installed on xubuntu) via pkg_config_file.
I am trying install rhel 6 on my rhel 5. I have downloaded rhel6.0-20100715.2-server-i386-dvd1.iso (from redhat ftp site) and burned into dvd. After rebooting I pressed F12 and chose cd installation.
I get the following message on my screen.
"ISOLINUX 3.86 2010-04-01 ETCO Copyright (C) 1994-2010 H.Peter Anvin et al
No DEFAULT or UI configuration directive found!
boot: "
I'm trying to install "ktranslator-0.4" on my slackware64-13.0. When I type in ./configure I get the following mesgs with error:
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
[code]....
I installed GD Package from cpan in ubuntu 10.04, but I need gdlib-config for this module. I installed libgd2-noxpm but I continue to have this problem.
View 1 Replies View RelatedI've been trying to install the gmagick extension for days now without success. I always end up with the same error message:
checking GraphicsMagick configuration program... configure: error: not found. Please provide a path to GraphicsMagick-config program.
ERROR: '/tmp/pear/temp/gmagick/configure --with-gmagick' failed
It's no wonder why I get this message as the location simply does not exists, its being unpacked to 'gmagick-1.0.3b2' and not 'gmagick'. I've tried to copy/paste the configuration file (config.m4?) to my manually created 'gmagick' directory within the temp folder but that didn't solve anything.
Command when installing:
Code:
pecl install gmagick-1.0.3b2
I'm running Fedora 12.
I'm trying to install kmplayer-0.10.0c and im using Fedora 9. when i tried to install the kmplayer-0.10.0c using the command ./configure i received this error msg "The important program kde-config was not found!. Please check whether you installed KDE correctly." Kindly help how to solve this error msg.
View 2 Replies View RelatedInstall problem: no acceptable C++ compiler found in $PATH (Trying to install freeciv, game) ... checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking whether the C++ compiler works... no configure: error: in /home/peter/Download/freeciv-2.2.1': configure: error: no acceptable C++ compiler found in $PATH See `config.log' for more details. Other threads suggest install gcc which I thought I already did yet it didn't solve the problem!
View 9 Replies View Relatedi was installing php5.3 on my system nd i followed d procedure
./install after processing man lines it said checking for xml2-config path... configure: error: xml2-config not found. Please check your libxml2 installation.
[Code]...
I installed cdroast that came with ubuntu and received the following:Warning: No root configuration file found or not readable!The superuser must start and configure X-CD-Roast first, before other users can use it.
I searched and found that the root configuration was turned off in some versions and uninstalled, then found a good version at http://www.xcdroast.org/ but when I tried to install from a *.tar.gz and after I ran a ./config.I downloaded glib-2.24.0.tar.gz and got a successful install, and I still receive the GLIB error. If the problem is GLIB_CONFIG environment variable, I do not know how to change that. I cannot locate glib-config either.
I installed tinyos-2.x in Ubuntu lucid. I tried to simulate tossim environment for simple Blink application using the command: make micaz sim and ended up with the following error:
mkdir -p simbuild/micaz
make: python2.5-config: Command not found
make: python2.5-config: Command not found
make: python2.5-config: Command not found
and
Python.h: No such file or directory
and
make: *** [sim-exe] Error 1
Eventually installed python-old-doctools package which supposedly includes python2.5-config package but alas! It doesn't compile yet.
i wanted to change the opacity settings in compiz config settings manager (i read it in the forum post that i can change opacity using compiz settings) when i opened the ccsm, i did not find the opacity settings in general options...do i have to update or upgrade?
View 4 Replies View RelatedI am trying to install wxsqlite3-2.0.2 on my Debian machine. I have installed wxGTK-2.8.11 in the folder: /home/mrj2/wxGTK-2.8.11
When I run the wxsqlite3-2.0.2 configure script, a problem arises due to the fact that wxGTK is expected to be in a specific directory. The wx-config file cannot be found. However, there are copies of these files for each type of build in the folders:
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseMacUnicode
There is not a problem with my wxGTK installation as I use it in DialogBlocks and it works fine.
My system is a Lenovo B500 All-In-One, with an Nvidia GTS 250M video card. nv seems to work okay, but I cannot get the desktop to load with the nvidia driver (nvidia-current, from the repository). I've been hacking away at this for a week and a half with no results. Every time I try to boot with the nvidia driver, the splash screen comes up for a second, the screen flashes a couple times between a "static" screen and tty2, then the screen seems to go to a test mode, where it flashes a series of solid colors indefinitely. Looking at /var/log/Xorg.0.log, I see the following:
Code:
(II) May 08 19:06:53 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 08 19:06:53 NVIDIA(0): enabled.
(WW) May 08 19:06:54 NVIDIA(0): Failed to enable display hotplug notification
[code]....
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
I am running a server with a GRSecurity patched Kernel 2.6.32.36. I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for 2.6.29.6-huge. Still I am not sure what to remove/optimize further now.
My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)
I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedI recentled upgraded all the packages on my server and now I have an issue where I can't get any thing to install or uninstall do to errors, This is what I get:
praetorian@praetorian:~$ ps ax | grep dpkg
7330 pts/1 Ss+ 0:00 /usr/bin/dpkg --status-fd 21 --configure bind9 cups cups-bsd
7331 pts/1 S+ 0:00 /usr/bin/perl -w /usr/share/debconf/frontend /var/lib/dpkg/info/bind9.postinst configure 1:9.7.3.dfsg-1ubuntu2
[code]....
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies View RelatedI have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .
*** I want to browse the folder ***
Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"