I tried deleting the partition where ubuntu was installed using the boot cd and going into its demo mode of ubuntu. I thought this would delete Grub but i was wrong so now grub cant find the partition ..I would like to believe if I were to delete grub off the system I could boot windows xp. what should I do?
View 4 RepliesI had 2 separate partitions on my computer: one for Windows 7, one without a system on it. On the 2nd of the described partition at the end of it I installed Debian Linux. (After that I had 3 usable / visible partitions.) I was looking for less hassle with drivers so I decided to install Ubuntu and make greater the partition for Linux. In a forum I saw an article describing how to uninstall (remove) Debian. Roughly it described the process as follows:Delete Debian partition from Windows. Restart and in repair mode enter "repairmbr".
I did the first step. After the restart, the grub seemed to be damaged and it wouldn't show any options. Started the Ubuntu LiveCD, made the "Linux" partition greater, moved it to the beginning of the original of the to large partitions, transformed it to an extended partition, created the swap area in the beginning of it and installed Ubuntu 10.10. All went well, a new grub was created, Windows loader was detected, but didn't work. Same after upgraded to a newer version of Linux generic kernel. The installation process detected the Windows 7 but after restart it does not work. When trying to enter it, for about 1..2 seconds the screen turns black and again the same Grub menu is shown. So the problem is that I cannot boot into Windows 7, I had pre-installed it so I don't have a disk for it. Recovery disks I made seems to be for re-installation only which is not an option at this time. All repair modes where accessible when starting Windows; any of them is not accessible.
Both Windows 7 and Ubuntu 10.10 are 64-bit systems.
I'm not sure if here is the right place to ask this. After installing Ubuntu 11.04 my windows 7 installation can't boot again. I installed ubuntu on a different partiton. I can see the windows partition on my ubuntu, from the disk utility, the partition type is unknown(0x42), trying to change it gives me error.
View 2 Replies View Relatedi just installed Ubuntu 11.04 and i was enjoying it, but when i wanted to boot into windows 7 my computer just restarts by itself. I really don't know much about Ubuntu
View 8 Replies View RelatedI installed Lucid Lynx on a dual boot with a previously installed copy of Windows 7 and everything installed fine via Wubi...but now when I boot up and I get to my Boot Mgr and select Ubuntu I get the following message and can not get past a black screen stating -
Try (hd0,0) EXT2
I have tried to read what others have done to fix this but nothing has worked so far,Also I can still log into Windows 7 just fine, just no Linux...
So I finished downloading Windows XP Ultimate (It is real. It's not officially supported by Microsoft) and I expected it to be small like Ubuntu was. I only have a CD-RW drive. I realized the extreme size difference with Ubuntu over 600mb and XPU over 4gb. I know how to modify partitions from the Live CD. I'm wondering if it's possible to install XPU or any version of XP while the operating system is active. It was possible with Windows 98. This might be the wrong place to post, but I really want to dual-boot Windows. Linux is great, but I would like to use SOME of my stuff without WINE.
View 1 Replies View RelatedI have an Asus Xonar DS, and am getting no sound in Windows whatsoever. I'm pretty sure something in Ubuntu is causing the problem as this only started happening after I installed it. I used to get heavily distorted sound in Windows, and now nothing at all. I've tried removing pulseaudio and disabled alsa, restarted ubuntu and then went into Windows, and it didn't help. Sound is 100% fine in ubuntu.
View 9 Replies View RelatedI want to set up my PC so that I have Windows 7 installed on one hard drive and Ubuntu Studio installed on a completely separate hard drive. I currently have both hard drives installed in my PC and the larger one (640GB) has Windows 7 installed and is currently taking up that entire drive. My other hard drive (160GB) has a wubi install of Ubuntu 10.10 on it so it shows up on the Windows boot menu. What I want to do is wipe the smaller hard drive and install Ubuntu Studio on it and have it show up in the boot menu just like my wubi install does.
I need to know things like:
1. When I install Ubuntu Studio, do I install the boot loader to the MBR of the hard drive I'm installing it on?
2. How exactly do I add Ubuntu Studio to the Windows boot loader?
in the grub menu once I select windows and press enter the screen goes dark and then it takes me back to the grub menu again.
both ubuntu 11.04 and win xp are installed on the same harddisk
Code:
setparams 'windows (on /dev/sda1)'
insmod part_msdos
insmod ntfs
set root = '(/dev/sda_msdos1)'
search --no-floppy --fsuuid --set=root XXXXXXXXXXXX
drivemap -s (hd0) ${root}
chainloader +1
I had Windows 7 installed on my PC. After that I installed ubuntu to dual boot the system.Now my windows doesn't start up (As soon as the windows logo appears,it restarts!!!)
I want to do a clean install of windows 7 now removing ubuntu but the windows disk does not recognise any hard disk.
What is the problem? How do I install windows again?
I am completely new to Linux as of today.I finally took the plunge and downloaded and installed Ubuntu 8.04 on my Windows XP computer (dual boot), using the Ubuntu installation wizard to "make room" on my hard drive for Ubuntu by creating a separate partition. The installation finished successfully and Linux boots just fine, but Windows XP will no longer boot at all.
I have read many threads on this and other sites, giving advice of how to correct this problem. I am not at all experienced in editing and working with different ways of booting (other than Windows default). But after some frustration, I located (according to the threads) a couple places to try making changes to the boot commands and I tried various lists that were suggested. Before I changed anything, the Windows XP boot screen would appear and then it would revert right back to Grub.
[code]....
what drive number Ubuntu and/or Grub installed to, or assigned to the Windows partition, and I have no idea how to find out. I do not have a Windows XP installation CD (it came pre-installed on my computer), so I CANNOT wipe out that partition and simply reinstall it--I MUST be able to fix the problem without harming Windows!!! I also have data in the Windows partition that I don't want to lose. I could possibly uninstall and reinstall Ubuntu (as I saw suggested somewhere online), but I have not the slightest clue how to accomplish that task--and WHAT IF it didn't work?
I'm currently dual-booting Vista and Win 7. Do I have to install Grub or can I continue to use the Windows boot loader?
View 5 Replies View RelatedI am not able to see the existing windows OS already installed when the machine is booting.When the machine boots up I see a blank screen and it boot directly into Ubuntu.Here is the results file I have collected by running the tool:Boot Info Script 0.55 dated February 15th, 2010============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
sda1: __________________________________________________ _______________________
[code]....
I have a laptop with a busted screen and no way to boot directly to the external monitor with ubuntu installed and the thing is I want to install windows 7. Anybody know of anyway to do this without being able to see the screen before the os loads? So far I have messed around with installing windows 7 in vm box and trying to turn the vdi file into a valid partition and also tried installing it with wine but it couldn't find the temp folder to copy the install files.
View 5 Replies View RelatedI am user of ubuntu 10.10 beta version. I installed windows 7 on ubuntu but after that ubuntu doesnt boot up! Somebody please help me.I have ubuntu 10.10 live cd for 32 bit desktop edition.I want to rescue this problem.
View 2 Replies View RelatedI played a bit with partitions. I'm not an experienced Ubuntu user, neither I have solid understanding of partitioning. And I hardly remember exact actions that led to this problem. I remember that I saw a warning in GParted that said that the partition was out of bounds or something.. But I followed some solution that I found on ubuntuforums and used fdisk to fix that. So, after installation of Ubuntu I couldn't boot into WindowsXP (after choosing Windows entry in grub2 menu I see only blinking cursor on black screen). But what's more important that I can easily mount Windows partition from Ubuntu. Also I tried to boot from Windows repair console and used FIXBOOT command, and copied[url].... and [url].... files to no avail..Here is the summary of what I got now:
Code:
sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders[code].....
I used to have Ubuntu 10.10 and Windows 7 RC on separate partitions and I could choose to boot into either. Today I installed Windows 7 Enterprise trial version over the Windows 7 RC partition, and lost the boot screen. Reboot goes to Windows automatically. How can I get the boot options back to launch Ubuntu?
View 4 Replies View RelatedI have Intel Pentium dual core T4300 2.10ghz processor in dell inspiron laptop. i had windows vista home basic by default and then i got ubuntu 9.04 installed on it from one of my friend. i was using ubuntu mostly (and upgraded it to ubuntu 9.10)as i never liked vista. so i installed windows 7 over windows vista. now vista is gone and windows 7 is working. but i no more see the boot options and cant access ubuntu at all. the boot options (F12) does not show linux partition at all. however the linux partition is seen in device manager. but its only seen.
how do i retrieve my old boot options including linux os? which asks me which os to boot from.
I just installed Fedora. I decided to duel boot and made sure to have it not touch my windows partition and install the bootloader. Now I can only boot into fedora which is lovely, but my windows is gone. Now I successfully mounted the ntfs partition windows was in, and the windows partition's fine and even the windows folder's still there but when I boot I only get the option for Fedora. Anyone knows how to fix it?
View 7 Replies View RelatedI'm not able to boot into windows XP after having upgraded to Fedora 15 (from a linux magazine DVD). I just get a perennial flashing cursor with black screen. I have tried leaving it like this for a few minutes to see if anything is happening in the background, but to no avail.There were no issues at all with Fedora 14.The grub.conf file appears to have been modified only to pre-pend the fedora 15 boot option. I have changed nothing else in grub.conf or (windows for that matter).All the Fedora boot options work correctly.I have update everything using yum update.Having read a few posts I am still none the wiser. I append the grub.conf and the output of "fdisk -l". What is Fedora 15 version of grub doing differently, and what has it modified that disables the windows part of the bootloader?
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[code]...
I'm looking for a good partition scheme to install BT4 dual boot with windows 7, I've freed up about 160 G for my install and was going to use BT4 as an everyday distro and wanted enough space to install extra packages like vlc and what not as well as use wordlist.sh to create a substantial dictionary. These are my initial partitioning plans 3G /,6G usr, and about 3G swap with the rest being /home for word lists and whatnot would you mind sharing your partitioning setups so I can make this efficient as possible?
View 2 Replies View Relatedi currently have lucid installed on my laptop hard drive. i took this drive out and then on a new drive in its place i have installed windows 7. reason why i couldn't put windows 7 on the same drive is that i have a BIOS based system and the hard drive is GPT based not MBR. therefore, i couldn't get windows back on it.
I figured that using an esata expresscard interface i should be able to use the Windows 7 drive externally without much speed penalty since ExpressCard in my case is implemented on PCI Express and not USB.
So i can update grub using
Code:
update-grub
and Windows 7 appears on the list. However, when i select this option during boot, it gives me errors that indicates that the external drive cannot be found (not surprising)
My guess is that when GRUB appears, the external hard drive has not been detected yet, and the modules for the expresscard may only be loaded during the boot process of lucid.
So I am wondering if there is anyway I can get this to work. meaning use lucid on my main drive and boot to Windows 7 from the external drive time to time.
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
View 1 Replies View RelatedSince CloneZilla doesn't include the MBR when saving a partition into a file, I need to take care of this myself. With a working XP in /sda1, I'd like to...
1. Boot with a Linux live CD
2. replace the Windows MBR with Grub, ie. without any Linux already installed
3. save Grub's configuration files into /sda2 (which is ext2fs-formatted)
4. add XP to Grub
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies View RelatedThis is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
me a easy and right answer to this post
View 3 Replies View RelatedI got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
View 10 Replies View Related