Software :: Acct Sa Only Shows Only Root No User Data?
Feb 21, 2010
I just did a clean install of suse 11.2. I then installed acct, using yast2.Finally I did:sudo /sbin/chkconfig psacct onsudo /etc/init.d/psacct startSo far so good. The problem is that if I now do:sudo /usr/sbin/sa I only see root processes. None of the user processes seem to show up. If I run it with -m flag, I just see a total and a root row, no users show up at all. But I do have user accounts on the machine, and I am working in one of them (only root when necessary).Any ideas why, or what to do about it? Is there something else that has to be configured?As I understand it, sa -m should show a summary for all users, not just for root.I want to be able to see how much time different users are using.
I just installed a clean install of suse 11.2. I then installed acct, using yast2.
Finally I did:
sudo /sbin/chkconfig psacct on sudo /etc/init.d/psacct start
So far so good. The problem is that if I know do:sudo /usr/sbin/sa I only see root processes. None of the user processes seem to show up. If I run it with -m flag, I just see a total and a root row, no users show up at all. But I do have user accounts on the machine, and I am working in one of them (only root when necessary).why, or what to do about it? Is there something else that has to be configured? As I understand it, sa -m should show a summary for all users, not just for root. I want to be able to see how much time different users are using.
I've checked gdmsetup and there isn't anything that I can see that keeps my general users from getting in remotely. I can get the Gnome to login as root but not as a user. SSH from PuTTY works fine for all users. The error I get actually says that the username or password is incorrect - checked using SSH and it is fine.
This is my 6th install of Fedora, begining with Fedora 4 I have had very good luck with all until 9 and I lost all data on drive by my bad clicks in a frustrated session. Now I have a great install of Fedora 10 with the exception that I fouled up and typed in a user (myself-'andybill') and am finding out that the work I need to do cannot be maximized by operating in user - andybill, I need to be super user. I have just moved and have not done any collaboration with our senior partner in a data development start up that he is the intellectual property in deed and law. For me to get back on track my using this OS I have to be master of all libraries, drivers etc. I am a nu-b (only 2 1/2 years, with no computer science background. This explains why I need step by step commands without abbriviated lingo-So if I can remove myself as andybill, make all root
Is It possible to change a process running in root-user to non-root-user by setting suid / uid / euid / gid etc... I so please instruct how, when and wat to set in order to change a process running in root-user to non-root user
I work for a seismic company that has recently experienced a security issue. Because we have an isolated network that is used for HPC work we have a very open security structue ie password less accounts rsh rlogin etc. We had, seemingly,a user that has maliciously deleted another user's files but I still haven't figured out how. So far I have been able to prove that this user has remotely logged into another host under that user's account... or at least that their workstation did. The /var/log/message file shows logins from their workstation as that user multiple times durring the times that these files were being deleted. There are wildcard searches for these files in the history in this host. There is a vi session initiated on this host for a file called delme (delete me) and then a chmod +x for this file. and then a deletion of this file (rm delme). Funny things: this user has no business in this acct. this user was bounced off the other host (permission denied) when trying to log into the other host and then as root logged into the other host as the other acct. repeatedly... ie. rsh -l xxx (permis den) then as root rsh -l xxx (logged in) why not su xxx and then rsh? password less acct?! why use root privs (which they sholuld not have) to log into a passwd less acct? Can't see any remote logins to their workstation from elsewhere. can't find smoking gun. no execution of delme script or any other rm /*/xxx/* sort of command that proves when file deletion of striped files happened?!
changing root passwd soon.need proof that no remote logins to a CentOS 5.3 workstation could be responsible. Could mean someone gets fired.how can I be sure that no other users logged into this machine and then into another machine for sure?
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
I just built a new 10.04 server. It has a 500Gb drive for the operating system and a 22 Terabyte drive that will be used for data. When I format the data partition, it only shows 2.2Tb available. I have this formatted as ext4. I know there is a 16Tb limit and I am going to repartition my drives, but shouldn't I at least be seeing 16Tb instead of 2.2
I have a lvm with 5 disk, I've been doing some benchmarks on the file-system with this lvm know I would like to remove one pv from the volume, I've tried
Code: # pvmove -v /dev/sde1 Finding volume group "test-vol" No extents available for allocation and also
Minicom was running fine two days ago capturing data from a gage device via a serial cable. Yesterday, users of the data started complaining that they were not receiving any data.
The minicom status line reads offline. Is this part of the problem or is this normal (I never really noticed it before.) All settings on the gage device match the minicom settings.
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
I no longer have access to my root desktop. On a session I attempted to change the root username but i apparently assigned it a wrong directory that does not exist. When I rebooted with my new root username, i was instead recognised as a simple user (no root privileges). I tried the console to change to "old" root but root password is not accepted and there is no way to access to sudoer files. it seems that inserting a new username requires root privileges and i am back to square one. Simply logging with old root username and password after restart gives me a blank screen with nothing on it and cannot even reboot.
i used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
i just installed linux mandriva 2009. i set password for root and created a user account. when i try to login as root, after logging out as user, it does not allow me and gives the error "root logins are not allowed". even it does not show the root account. if i try to go to root from konsole terminal using su root, it allows to enter as a root but when i try to start the GUI with startx it gives error.not sure what to do and why i can't see my account in GUI mode
I finally got Xubuntu 10.10 working on an USB thumb drive. Everything is working fine. One thing is bugging me though...The filesystem / (root) drive is shown twice on the desktop.One icon is the normal hdd icon for the root system (which you have on every Xubuntu system by default) but the second one is labeled as "removable drive ?3G?" and has the removable usb drive icon.Both of them point to the root drive.
I found that if any usual user is logged into a NDS-tree, then _local_ root has full access to user's network shares, including the user's home directory located on remote Netware-server. Is it by design or have I missed something? Nevertheless in windows local admin has no access to network resources mounted of any other user. If you runas shell (as admin) then admin in principle can't "see" network shares which were mounted (connected) by other users - they are accessible ("visible") per session.
I am using mint 8 for a 2 weeks, I am noob to linux but I like Mint than any other linux distro which is great alternative to windows. I have a problem regarding password reseting.
1. My laptop automatically get logged in without asking user name and password.
2. I tried to change password for newly created user and root user using graphical way but it does not work.
2. I can perform administrator task using only OEM user which is default inbuilt user of mint.
How can make my laptop to ask password when mint get booted? How to change password for other users?
my isp is putting a max bandwidth in my area and I need to monitor my downloads and uploads per month. Is there anything that has a gui that is easy to set up and just shows the amount of data downloaded and uploaded per month. Also if possible to do a pop up if you set a maximum bandwidth amount.
I need applet which shows the total data usage (In+out) (of the current session or since the uptime) on the panel.I searched a lot, but everytime I had to click somewhere to see my data usage. I don't want that. I want my data usage displayed regularly on the panel.
I have a new system using an Intel DG451D main board. I have been trying to get a RAID 1 mirror set working as the main drive in this system and for some reason, my SATA drives - three of them all new have had their SMART data changed to show the drives as failing and in need of replacement. Eventually the drive reports failure to the degree that the BIOS no longer recognises it. When loading the Centos os I was getting differing results because of this issue. I am not sure if this is a hardware issue even - I know that the drives were all very much OK and brand new - no good now! Just putting a feeler out to see if anyone has had a similar issue or to see if anyone knows of any possible known causes for this?
Failing any explanation, can anyone suggest a good desktop style Main Board that supports RAID well for Centos 5.4? I plan to sue this as a small server system so graphics etc are not important here.
A friend of mine has told me to set a root password and use root (f.e. switching to su in terminal and work with root rights instead).Is there any way to unset the root password? I know how to use sudo now.
Recently I started having this problem where most users on the system are unable to log into the system over SSH. Their user name and password is correct, however it shows them as invalid when they are in fact valid. I've tried changing their password but that didn't work. I also tried deleting their account, as well as their home directory, and then recreating the account, but that didn't work. Only root and perhaps one or two other select accounts are able to log in without problems. I even tried a reboot to see if that would fix it, but as I theorized, it wouldn't. I also checked and ensured their home directory was chowned to them, and that they even had a home directory. Any assistance would be greatly appreciated to help me get this issue resolved. As a dsie note, they are showing up as invalid in /vars/logs/auth.log. Running Debian 5.0 Lenny.
I am configure one sftp server(openssh) in my linux server. Its working fine. but when i try to connect its shows all folders like root, boot. but i need particular folder only. how to do this. I am using centos5.2
I am running Fedora 13 - 64-bit variety and using KDE as the gui. No real issues asides from machine not exactly flying, but then this is a mere core 2 duo 1.6 with 2 gigs of ram, so not unexpected...
When I run top I see 3 users indicated - which worries me somewhat... I am the only user on this machine.
I come from a Debian / Ubuntu /Gentoo knowledge-base and this laptop is a fresh install, encrypted partitions, temp has own partition (encrypted too) and obviously the firewall is on, with ssh service turned off and ssh access removed in the firewall....
is this 3 users in top normal, or have i managed to be hacked in the 3 - 4 days since I started the install ? In all this time I have been sitting behind a router when on the net.
Am I looking at a fresh install, or are there valid reasons for the extra users?
I just ran "users" in terminal and I show up 3 times - I have only logged in once, through the GUI and no extra access routes
I've got a server running CentOS 4.8 (binary compatible RHEL 4.8 clone) that's decided all the accounts are expired.I've tried this on multiple accounts so far, to no avail.chage -l <username>Shows that the account never expires. In this case the problem was first noticed with the root account, then I tested it with my user account, and got the same answer, the account never expires.For the test I added a crontab to my account, and to roots, ever minute run "whoami"In the log I get (once for each crontab):rond[]: User account has expiredRecycling crond doesn't help, and I can't recycle the box itself as I've got users on it (pounding away at the poor box at that).
Several searches so far have only turned up that locked root accounts (ala debian/ubuntu) can cause this, and check or correct the age of the account using chage.Comparing entries in /etc/shadow to other boxes where everything is kosher doesn't seem to help either: the important bits are identical.
Working box: kschmitt:$1$QykLetnt$ynSZ.7uKQSRnS3lsYe01w1:14613:0:99999:7::: Screwie box:
Lucid is not in testing but it's released.It seems it works now, with all desktop effects activated and switching users and closing sessions.The only thing I still don't know is which screensaver can I use if removing gnome-screensaver?
I'm currently setting up a dell server with hardware raid 1 on sas 6r. i got 4 sas installed on the server and configured to raid 1 as stated below, array 1: slot 0 & 1
array 2: slot 2 & 3
during the installation, the installer detect the array 2 as sda and array 1 as sdb.. so i proceed with installation on array 2. after completed the installation, the first reboot lead me to a 'grub-rescue" prompt. by following the guide at url Mode, i've noticed that the boot folder has changed to (hd1,1), which i believe it has changed to sdb1. default root device shows that prefix=(hd0,1)/grub.
I was using Ubuntu and installed Opensuse 11.4. I have installed Pidgin 2.7. I copied the old .purple directory from Ubuntu into my Opensuse home directory. But now the Pidgin is not reading the data, logs and configuration from the .purple directory.
I was wondering if there is a program or just a simple copy and paste from somewhere that will allow me to move my favorites and other data from my opera on xp.
