Software :: Windows Cannot Access Samba Directories
Sep 12, 2010
I am trying to set up samba on my CentOS Linux 5.5 server, and I've gotten to the point where the Windows Sharing Center recognized the server, can even connect to it with credentials, but when I try to access a directory, I get this Message:
Code:
Windows cannot access \HOMEpublic
Check the spelling of the name. Otherwise, there might be a problem with your network. Try to identify and resolve network problems, click Diagnose. When I click diagnose, it does not fix the issue.
This happens with any directory I create. I chmod the directories to 777, so I don't see the problem with permissions.
This is my config file. (smb.conf):
Code:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
[Code]....
View 4 Replies
ADVERTISEMENT
Sep 12, 2010
I am trying to set up samba on my CentOS Linux 5.5 server, and I've gotten to the point where the Windows Sharing Center recognized the server, can even connect to it with credentials, but when I try to access a directory, I get this Message:Code: Windows cannot access \HOMEpublicCheck the spelling of the name. Otherwise, there might be a problem with your network. Try to identify and resolve network problems, click Diagnose. When I click diagnose, it does not fix the issue.This happens with any directory I create. I chmod the directories to 777, so I don't see the problem with permissions.
This is my config file. (smb.conf):
Code: # This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
[code]....
View 2 Replies
View Related
Oct 20, 2010
I would like to configure an access to folder
/fileserver
for two services : Samba and VSFTPD
How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.
My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)
View 1 Replies
View Related
Apr 1, 2010
I've got a small issue that when a Windows user creates a new folder through Windows Explorer (from the menu or by right clicking) the new folder is only accessible to that particular user. Example: user SABKAR (member of the HR group) creates a new folder called MarcTestMenu in a shared Samba directory through Windows Explorer:
[Code]....
At this point user MORAMY cannot copy a file or open the directory MarcTestMenu. MORAMY gets a 'not accessible' error message in Windows. If I su to the Samba box and issue this command:
[Code]...
how I can get the correct default permissions when users create directories through Windows?
View 1 Replies
View Related
Mar 9, 2010
I have a fileserver running openSUSE 11.2 and samba services for file access from MS Windows based workstations. My question relates to changing default permissions on files and directories created from the windows clients.
Following are extracts of the /etc/samba/smb.conf file :
Even with the above entries, sometimes there are files and directories created by the windows clients having permission
Probably my lack of understanding in ACLS.
View 9 Replies
View Related
Jan 27, 2011
I have setup CentOS 5.5 with SAMBA 3, configured all my Unix users, Samba users and shares. My server hostname is REL3
[root@REL3 ~]# smbclient -L REL3
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1]
[code]....
View 16 Replies
View Related
Feb 27, 2010
I am using RHEL5 in that i have installed samba rpm as well as created samba users while access the shared folders in WINDOWS i got "access dined" error.
View 1 Replies
View Related
Apr 26, 2010
I installed samba (in Ubuntu 9.10) and I can access shared files in Ubuntu from Windows 7 but when I try to access W7 files from ubuntu: Places>Network, it prompts me Username,Domain, Password. I tried Username = W7 usernameDomain=my workgroup (MSHOME)Password=W7 login passwordbut it prompts me same thing again...checked some other related threads but couldn't get any luck.
View 4 Replies
View Related
Dec 18, 2010
i set up samba and im trying to acces from windows xp. i can see the drive if i go to run and type the ip adress but when i click on the share i get an error that says "sharename" in this case "sam is not accessible" you might not have permission under this network resource. so how do i give myself permissions. I have followed several tutorials tried different types of set up , restart of samba and what not. but still nothing. I should mentioned that i have been at this for 3 days now and still cant get it to work. i have red hat linux 5.1 and window xp proffesional.
View 5 Replies
View Related
Nov 26, 2010
I have just configured samba on suse linux. I can see it in the windows workgroup but i cannot access it. When it says the server is not accessible. You might not have permission to use this network resource.I have attached a copy of smb.conf
View 2 Replies
View Related
Mar 29, 2010
I want to share folder in fedora 12 so that any windows user can access my folder (without modifying its content) and there should be no password to be entered by the windows user. I tried samba gui but the folder does not open using windows.
View 3 Replies
View Related
Mar 22, 2010
I am trying to connect to a Windows 7 PC through Samba, and while samba can find the Windows 7 PC, it cannot access it, asking for a username and password instead. However, I can access the another Windows XP share perfectly fine.
View 2 Replies
View Related
Jan 2, 2010
spent so much time trying to get Samaba working, but with no luckHere is my smb.confQuote:
[global]
realm =
netbios name = rlx-laptop
[code]....
View 9 Replies
View Related
Dec 26, 2010
I had 10.04 set up in my computer so that I had two folders in home, they connected to folders in a windows 7 computer by adding the following to the fstab file:
Code:
//10.0.0.80/Movies /home/loco/Videos/Movies cifs username=guest,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
[code]....
View 7 Replies
View Related
Mar 4, 2011
I cannot access my Ubuntu samba server using windows XP or 7. I keep getting prompted for a username/password. I have created both a unix username with password and a samba username with the same password i used for the unix user. When windows prompts me for the username/password i give it the same one i created on the samba server, but it still will not take it. I know samba is running because i can view the shares but cannot access them without getting prompted for username/password. I just have the one user for now while i am testing, but there will be more.
I am using Ubuntu Desktop 10.04.
View 2 Replies
View Related
Apr 13, 2011
I have samba set up, and I can log in, etc. However, whenever I try to access a symbolic link, windows tells me that "windows cannot access [directory name]".
I have this under global, but it doesn't seem to help:
Quote:
follow symlinks = yes
wide symlinks = yes
unix extensions = no
The permissions of the target directories are open.
View 3 Replies
View Related
Jul 7, 2010
So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.
I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it
View 5 Replies
View Related
Jan 15, 2011
I've recently been experiencing an issue connecting to my Samba shares on a Ubuntu 10.4 server box on my network from a Windows 7 client. If I use Ubuntu 10.10 on the same machine, or a Windows XP Virtual Machine running under both Windows and Linux host the share works absolutely fine.
What happens is if I browse to the hostname or the IP address I see a login prompt (there is access control) but my username and password no longer work. Before I didn't need to login as they are the same as my windows credentials.
I'm not sure what information/logs etc would be most relevant so I've posted some information, if any more is required then let me know where to find it and I'm sure I'll be able to get it.
Here is the last few days of the log when I believe it was working, there are no entries since.
Code:
View 8 Replies
View Related
Feb 25, 2010
i did install and configure samba buy google tutorials. I can ping the centos box from windows but cannt access folder which is on centos. I can ping the machine.
View 9 Replies
View Related
Sep 10, 2010
I have been having problems with Samba sharing from my Ubuntu-Server to all of my Windows 7 machines. All of the machines are able to access the samba shares however when i try to write to these shares i get a "Access Denied" error. This only happens under windows 7, my Ubuntu laptop easily writes to these shares. PS My permissions are read/write to all
View 1 Replies
View Related
Aug 16, 2010
So far I've been able to get Samba to connect to the my WORKGROUP and I can see my Vista PC as well as my 3 hdd's but when I try and open the folder, any folder, C$; D$; or E$ I'm confronted with a user name and
password prompt. No user name or password combination that's associated with either machine, openSUSE or Vista will grant me access. Why am I seeing this prompt and what I would really like to know is can it be
disabled all together? Otherwise, what user name and password does Suse want? Do I need to tell Suse in a terminal a user name and password?
View 3 Replies
View Related
Jul 16, 2010
I want to install Samba server to access a shared folder in Solaris box on a windows box
View 1 Replies
View Related
Feb 8, 2010
I have set up RHEL 5 file server with Winbind and samba services running.I am able to assign and authenticate windows XP users against my RHEL 5 server.No issues.But one or two of my users are using Windows 7 Ultimate edition and they are not able to access my network samba shares.I can view the shares in windows 7 box but trying to access gives me "network access denied error".But i can access the same share in Windows xp machine for the above tested users.Working great but not in windows 7 box.I haven't tested with Vista OS yet.
View 2 Replies
View Related
Mar 23, 2010
I'm running Ubuntu 9.10, and am getting the following error when I attempt to access the HADEN workgroup on my Windows network via Samba: Unable to mount location - Failed to retrieve share list from server. I ran the following command:
Code:
peterv@MBP17U:~$ findsmb
sh: /usr/bin/nmblookup: not found
*=DMB
+=LMB
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
[Code]...
On my Windows XP machine, I can see the Ubuntu directory and can access files on it. I just can't access the Windows workgroup from Ubuntu.
View 1 Replies
View Related
Jan 20, 2011
I recently installed Ubuntu 10.10 on my sister's HPtx2000 since she isn't going to use it anymore and it worked better than I expect. The touchscreen works without any additional driver tweaking and installation <3, the wireless works fine, the sound works. I listed those because when i was installing, I was looking around at other people that did this and those were the problems they had (but those was of an old OS).
Well anyways, what I want to ask is about the stuff that doesn't work and the stuff I want to do: The buttons that flip the screen and etc doesn't work. Is there a way to map them and flip the orientation of the screen? And the other buttons too, like the media button. Is there a way to map them to open VLC or something? Does anyone know any tablet programs for Ubuntu? E.g a simple text program that can convert stuff written to neat, typed font? A way to write text into a google search bar using the stylus? And while we're on this, is there a way to map a left click on the touch screen?
In Windows, the left click could be mapped to: a). a side button of the pen, b) the top button of the pen, and c) holding the pen down onto the touchscreen. how to use Samba to access a public folder of a Windows computer? And to access the printer connect to the Windows computer? Some of the tutorials I found were only for folders and printers on the Ubuntu computer.
View 4 Replies
View Related
Jul 15, 2011
I am unable to access samba share from my windows machine. I am getting the following error
View 9 Replies
View Related
Jan 23, 2010
I can't be the first one with this problem. What am I missing?
I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.
---- Environment summary:
Clean server install of CentOS 5.4 includes SELinux
- lets call this 'server'
- updated samba to 3.0.33-3.15.el5_4.1
Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above
Client2 - Windows Vista - WINS configuration uses 'server' noted above
---- What works / what doesn't ------
Clients can see the server (XP and vista) in network neighborhood.
The following does not work from windows (xp or vista)
net view
net view \server
net view \server-ip
net view \servershare
This does work on the server
smbclient -L \server
smbclient -L \server --user validuser
smbclient -L \client1 --user validuser
---- What I have configured and tried (config/output below) --------
firewall ports for samba are open
SELinux enforcing or permissive
file context is set on share
samba booleans are set
***firewall
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT
***SELinux mode/booleans
# sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: permissive
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted
# getsebool -a | grep smb
allow_smbd_anon_write --> off
smbd_disable_trans --> on
# getsebool -a | grep samba
samba_domain_controller --> on
samba_enable_home_dirs --> on
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
virt_use_samba --> off
***filesystem
# semanage fcontext -a -t samba_share_t �/share/photos(/.*)?�
# restorecon -R -v /share/photos
***Disks
]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9920624 2070872 7337684 23% /
/dev/sda1 101086 19146 76721 20% /boot
tmpfs 1846656 0 1846656 0% /dev/shm
/dev/mapper/VolGroup00-xen
100791728 202540 95469188 1% /xen
/dev/mapper/VolGroup00-photo00
251981556 191716 238989840 1% /share/photos
/dev/mapper/VolGroup00-dmsdoc00
100791728 192256 95479472 1% /share/alfresco
none 1846656 104 1846552 1% /var/lib/xenstored
***smb.conf
[global]
workgroup = workgroup
netbios name = server
security = user
name resolve order = wins hosts lmhosts bcast
encrypt passwords = yes
hosts allow = 192.168.0.
hosts deny = 192.168.122.
interfaces = eth0
passdb backend = tdbsam
oslevel = 222
local master = yes
domain master = yes
preferred master = yes
cups options = raw
username map = /etc/samba/smbusers
wins support = yes
log level = 4
guest ok = yes
[photo]
comment = Photos
path = /share/photos
read only = yes
guest ok = yes
View 5 Replies
View Related
Oct 12, 2010
I am new to Linux and want to setup Samba server in my CentOS 5.3. I have downloaded samba server from yum repository with command
yum install samba
I then followed the steps which i got by some googling on
http://crazytoon.com/2007/05/22/samb...centos-fedora/
this site which contains steps like code...
How to resolve it ?
View 5 Replies
View Related
Sep 7, 2010
I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies
View Related
Mar 8, 2011
I have ubunto desktop 10.04 LTS I installed samba and able to access the share on windows machines. However i want to access the share on 300 windows machine(for example) systems at a time Is it possible.
View 5 Replies
View Related
