Software :: Use Fedora To Recover Data On Hard Drives From A WD ShareSpace 4TB NAS?
Jan 5, 2011
My sister-in-law (SIL) has a Western Digital ShareSpace 4TB network access storage that was setup in a RAID 5 configuration (four 1TB hard drives). To make a long story short, a blinking red light on the device and a call to Tier 2 technical support, one of the guys mentioned using Fedora as a way to retrieve the data from the hard drives (seems like the hard drives are good but maybe the actual NAS device crapped out).
I will not have access to the hard drives till this weekend and of course Tier 2 technical support is closed on the weekends. I have almost no Linux knowledge but can follow instructions pretty darn well. I am looking to install Fedora 14 Desktop Edition 64 bit on my desktop sometime tonight or tomorrow. Once I have Fedora installed, how would I mount the hard drives and have Fedora read the RAID 5 array?
View 4 Replies
ADVERTISEMENT
Jun 26, 2010
Using F12 with a LVM Volume, Single disk with OS on and boot partition. The OS HDD is getting i/o errors, but will still boot to the login screen. I've removed the HDD and connected it to a Fedora Live OS on my laptop, connected the HDD and it registers as :
[root@localhost]# fdisk -l /dev/sdd
Disk /dev/sdd: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000e0069
Device Boot Start End Blocks Id System
/dev/sdd1 * 1 26 204800 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdd2 26 30401 243991201 8e Linux LVM
And it tried to mount /dev/sdd2 to view and see if I can recover some files.
[root@localhost]# mount /dev/sdd2 /mnt -t ext4[root@localhost james]# mount /dev/sdd2 /mnt -t ext4
mount: wrong fs type, bad option, bad superblock on /dev/sdd2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Any way to mount the partition to allow me to try and get some data back, or if trying to do a full backup of the drive you can get it to ignore i/o errors.
View 1 Replies
View Related
Feb 1, 2011
I have been tasked with accessing data stored on a WD Sharespace drive. I have a machine running Fedora 13 at my disposal to do this. So far I am running into dead ends. The drive is connected via Ethernet, but I have never accessed a network drive in Linux before.
View 1 Replies
View Related
Feb 25, 2011
I am using software RAID in Ubuntu Server Edition 9.10 to mirror(RAID1) two 1TB harddrives. These are used for data storage and websites.I also have a 80GB harddrive for the operatigsystem. This drive has no backup or RAID at all. Should this drive crash and the system therefore to become no longer bootable, will I be able to recover the data the 1TB drives or should I backup the 80GB drive as well?
View 3 Replies
View Related
Aug 11, 2010
I just want one last attempt at seeing if there's a solution. My Dell Studio 15 laptop HDD that runs Vista failed, I booted Ubuntu from a CD knowing that I should be able to recover my data.
However, Ubuntu can't find my HDD, it's not listed and "fdisk -l" doesn't result in anything. The BIOS seems to know that the HDD is there though.
View 4 Replies
View Related
Dec 16, 2015
I've been trying to discover how can I recover data from a hard drive that as been previously configured with LVM, although not encrypted,but I have been having mixed results. I've been using LVM more and more lately to configure hard drives and my greatest fear is to have a motherboard fail on me and get locked out of the contents.
View 8 Replies
View Related
Dec 1, 2009
Trying to recover data off a shot hard drive. XP system. says I don't have permission to open the drives/folders.. not the owner...
View 6 Replies
View Related
Jul 18, 2010
I have a Linux CentOS server.Is there a way to store all changes made to the hard drive by all software on the server ?
View 14 Replies
View Related
Mar 29, 2010
I have heard of a linux based data recovery for hard drives (corrupt) its bootable and once loaded and booted it will scan for drives and show there contents and let you pick and choose which ones you would like to back up/ save to a disk so you can wipe a drive and keep your info but I cannot remember the name of it.
View 5 Replies
View Related
Jan 15, 2011
I am in the process of recovering data from some damaged hard drives.
I am copying the data to a recovery folder on the safe system disk where it is being sorted.
Some of the data/files I do not want to keep.
I want to delete them.
However the permissions are such that it will not let me.
I need to be root.
I don't really want to flaff about in the 1980's geek terminal environment ... just want to right click and select delete.
Is there any way within the GUI to be as one with Root, all powerful, all seeing ......
View 3 Replies
View Related
Jul 8, 2011
Is there a way? My computer has a newer, narrow-plug hard-drive. Not Linux specific, I know, but I'm in a bind.
EDIT: Picked up an I/O Magic 2.5 inch IDE/SATA enclosure.
View 2 Replies
View Related
Jul 5, 2011
I have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies
View Related
Jan 6, 2011
Because a customer of mine is inefficient in doing backups I have to do a recovery if possible. Drive had vista on it and was really bug infested to point of a reload. I reloaded vista from scratch and then my customer says "Oh, I guess I forgot to back those files up...".Is it possible to recover some files even though vista was reloaded? I suppose the basic answer is "As long as they havent been overwritten yet".
Im running testdisk and its made a ton of directories with files in them that I assume it has recovered. Im going to have to write a script I guess to grab the files as there are about 600 directories!I guess what Im asking is 1. What are my chances of success? 2. Has anyone ever recovered files from a vista re-install? 3. Is testdisk the best way of going about it (with photorec).
View 4 Replies
View Related
Jan 25, 2011
I've got 4 identical 1 TB drives and would like to use them in a software RAID configuration on my home server. I'm running Debian Linux using 'mdadm' utility to manage the software RAID. I don't know how much I've read is fact or dated or even false so I decided I would ask here to get help from people who know more about this than I do. This is essentially just a file server machine to store all my data so being that I've got four identical SATA hard drives, I was thinking about doing RAID level 5. I guess I'll start here and ask if that is the recommended level of RAID. I think RAID level 5 will be fine for my general server usage. My second issue is partitioning the four individual drives to get maximum performance / space from them. Basically just asking here how would you or you recommend I partition the drives? I was thinking about doing three seperate partitions per drive:
/dev/sda1 = 4 GB (swap)/dev/sda2 = 1 GB (/boot)/dev/sda3 = 995 GB (/)Now from that partition schema above, obviously all the types will be 'fd' for RAID and the partition for /boot is going to be bootable. My confusion is that I read Grub doesn't support booting from RAID 5 since Grub can't handle disk assembly. If /dev/sdx2 (sda2, sdb2, sdc2, sdd2) are partitioned for /boot (bootable), how would you guys configure this RAID to match up equally? I don't think I do a RAID level 1 on 4 identical partitions, right?
View 1 Replies
View Related
Aug 19, 2010
I have a laptop with Fedora 12 on it and I accidentally did an dd if=/dev/zero of=/dev/sda (since then I learned to think before I type)
anyway, I stopped it in time (I hope), it only zeroed first 60 MB. So, it killed partition table and boot partition. What I need is home partition, and it should be untouched. home is on a LVM device (fedora default install settings), and I tried testdisk (supposedly handles LVM) but it found only one partition (I guess it's a LVM physical device, as there should be 3 partitions, /, /home and swap) and said it's not recoverable.
Is there a way to get access to files on that partition (partition itself, including file table should be untouched). Partition contains various data (video, audio, and text) I need back (and it's my data, not backed up, and not something I can redownload). Is there any software that can help me with this, and if not, is it theoretically doable (I believe it should be, as the partition itself is not damaged, so it should be possible to read file names and link them with data on disk, am I right)? what is a good way to image the disk, so I can reinstall the laptop while trying to rescue data from image?
View 2 Replies
View Related
Oct 30, 2009
I have 3 drives in my computer. I installed Fedora 11 on my two biggest one, with the LVM treating them as one single drive. I attempted to install XP on my last drive. As I was installing, I selected my third drive (I'm 100% sure it is the correct drive as it is an 80gb whilst the others are 120 and 200 respectively) and told it to delete the partition on that drive and format. After I did that, it started to format, starting with my 120! I'm fairly sure that it was merely a quick format, as it only took 5-10 seconds for it to format, and that my data is still there. Is there any way to recover my "lost" data, or did I just really screw myself over?
View 6 Replies
View Related
Dec 25, 2009
I was testing a bug in F12+Acer Aspire One and its 'suspend' feature (you can probably find the thread) and I ended with my SDHC card messed up. I formatted it as ext2 (or ext3, don't remember exactly) and apparently its superblock got corrupted. For one thing there is a single file I want to recover from the card (I don't mind formatting it afterwards). I am no expert using e2fsck or fsck, that's why I am asking here. In addition I used the "dd" command to create a backup of the drive in a file (so I can start tinkering with it). What is the best course of action to recover my files? Either from the card or from the image?
View 3 Replies
View Related
Jan 26, 2011
By mistake I formatted an ext3 partition on my external hard-drive. Now it has turned into a vfat filesystem. Is their any chance of recovering the lost data?
View 4 Replies
View Related
Sep 1, 2011
So WINE did an excellent job at finding my C:, but I also have 3 other drives that are NTFS partition and WINE isn't detecting these drives at all. How do I make WINE detect these drives?
View 1 Replies
View Related
Jan 28, 2010
i have recently setup and installed Ubuntu 9.04 on a virtulal drive usingVMWare 6.04, installed the desktop gui as well, I need to add other drives for data and loggng, which I did in the VMWare side. I can see the 2 drives in ubuntu, but can not access them, I get he unable to mount location when I try. How can resolve this please as I need these to virtual drives to be used as data drives.
View 1 Replies
View Related
Mar 20, 2011
I installed fedora on one of my three hard drives and it seems that something went wrong with the other two. Fedora recognizes the other drives but it seems the data on those drives is not there anymore. The below images are screen shots from my computer folder and disk utility program. I tried to look through Fedora documentation but I did not find a solution to my case.
View 14 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Aug 10, 2009
I have a fresh installation of Fedora 11 and I am having a hard time figuring out how to automount my storage drives. Each time I login, I try to access my various storage drives and gnome makes me authenticate asroot before mounting it. FSTAB lists only logical volumes but not my storage drives. What can I do to make sure these automount when I login?
View 3 Replies
View Related
Jan 12, 2010
I have two identical 73 GB Scsi ulta320 scsi drives, Fedora web server is install on one drive with all web files and etc. I wish to make an exact clone of the drive that will boot and run everything as the current drive does now. Is there a download of a program I could download or purchase that would boot and make an exact clone to do the above.
View 6 Replies
View Related
Apr 7, 2011
I am trying to figure out how to get the UUID for some of my external hard drives.the internet revealed a couple of promising leads, this is what I have tried so far:
ls -l /dev/disk/by-uuid -> didn't list the hard discs
blkid -> didn't list the hard discs
lsusb -v -> listed the hard disc but no uuid
A normally formatted usb key is listed with uuid. The external hard discs are fully encrypted by truecrypt(realcrypt). I have been reading not so great things about that itself, but for now I don't have a promising alternative that I can use with windows as well.Any google searches don't seem to cast any new light on this for me,I'd be open to suggestions if there's a better way to get a definite ID for a hard drive... I just need to be able to mount it with realcrypt
View 3 Replies
View Related
Jul 11, 2009
I installed Linux on my Y drive, and all went well until I tried to boot into XP again. I can't access or install an operating system to my other three hard drives, C, X, and Z.I think that during the install my hard drives were changed to something other then NTFS, but Linux won't access them either.
When I use my Windows XP or Windows 7 disc, it says the drive has 0mb free, and it can't install until I delete the partition, then reformat. I don't want to do this obviously, because I don't want to format all of my data.When I go to Places > My Computer it lists my CD drive, Filesystem, and the Y drive. It doesn't show my other three hard drives.Under Palimpsest Disk Utility I can see my other three drives, but I can't access the data on them yet.
View 3 Replies
View Related
Apr 10, 2010
I ran smartctl and it says "unrecognized" hard drive. I recognized the hard drive the first time I ran the test. But now, it's unrecognized? How come? I don't know how or why this happens. How can I get rid of this problem and the annoying icon?
I tried to run Windows, then started getting errors? This is strange: I've been running Linux the whole day. I last used the Windows hard drive was 2 days ago. Now its screwing up. Window is screwing up the hard drive? HDD has too many bad sectors. didn't touch it, I didn't do much on it, etc? I do not understand?!
View 4 Replies
View Related
Oct 5, 2009
I've installed Fedora 10 short time after it came out. Now I am having some problems unmounting thes drives on restart or shutdown. It hangs at the stage of 'unmounting file system'. I've looked into this matter and discovered that those drives are automatically mounted and shown on the Gnome file browser. As the /etc/fstab indicates, it is not mounted by it. I must have done something to have all the hard drives shown in the file browser and now Fedora seems to be unable to unmount them.
Quote:
#
# /etc/fstab
# Created by anaconda on Mon Sep 7 20:25:11 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[Code]....
View 4 Replies
View Related
Dec 11, 2009
First time linux user, am trying to install a fresh full install of Fedora 12 dvd i686 version. I have two identical sata drives, which fedora fails to identify. Have reset the bios, changed settings in the bios, still not finding them. I have an asus av8-x motherboard, with a athlon dual core processer.
View 5 Replies
View Related
Sep 3, 2010
The Fedora installer won't display my two SATA hard drives. I've tried both the x86_64 live CD and DVD. On the live CD, fdisk -l displayed nothing. However, if I click "Specialized Storage Devices" a devices shows up as "BIOS RAID set (stripe)" with a capacity equal to both my hard drives. I don't even have RAID enabled in BIOS - it is set to AHCI. Other os installers display the hard drive correctly.
Specs:
2x 640GB western digital caviar blacks
ASUS M4A78T-E 790GX motherboard
View 2 Replies
View Related
