I have a fresh installation of Fedora 11 and I am having a hard time figuring out how to automount my storage drives. Each time I login, I try to access my various storage drives and gnome makes me authenticate asroot before mounting it. FSTAB lists only logical volumes but not my storage drives. What can I do to make sure these automount when I login?
View 3 RepliesI know this problem was mentioned here before but because I could not find a straight forward solution anywhere I am reposting this here. So here goes.As of today, my Fedora 13 64-bit has ceased to auto-mount USB drives completely. I have made absolutely no changes to the system and I am completely baffled and frustrated by this sudden development. I desperately need this system to function properly as I use it for school and this really put a wrench in my works, especially since I have done nothing to cause this. I assume that one of the many recent updates that have been released must have done this, but I have absolutely no idea how to fix this. Why do Fedora developers release updates that cripple a perfectly functioning system is beyond me and crap like this really makes me consider switching back to Ubuntu.
View 9 Replies View Relatedmy opensuse is not auto mounting USB drives anymore. It was working a few weeks ago! I have an external 500GB HDD and also an 16GB Kingston USB flash disk, both are not being auto mounted.If i do lsusb i get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]....
I installed UNR recently and after a few days, it stopped auto-mounting anything not part of its default installation. Meaning, it won't auto-mount anything plugged via the USB as well as any other drives or partitions I added to fstab. Everything seems to be correct especially since it works fine on my desktop and I have exactly the same configuration (of course except for the UUIDs). I have to manually go to Disk Utility just to mount and eject/unmount.
UNR also stopped showing 'detected' and 'mounted' drives via the "Files and Folders > Volumes" section, even tho the system detects these drives/partitions (eg. via Disk Utility or blkid).I have the permissions for the logged-in user set. I have the nautilus automount setting checked (it was never unchecked). For the fstab part, the UUIDs are correct and everything else. For the USB part, well, just like the fstab part, no auto-mounting at all.
I have a few hard drives that I connect to my system with an usb to ide cord. some of the drives mount right away but some others don't below example.
Oct 24 11:10:04 linux-b21t kernel: usb 1-3: new high speed USB device using ehci_hcd and address 14
Oct 24 11:10:04 linux-b21t kernel: usb 1-3: configuration #1 chosen from 1 choice
Oct 24 11:10:04 linux-b21t kernel: scsi15 : SCSI emulation for USB Mass Storage devices
Oct 24 11:10:04 linux-b21t kernel: usb-storage: device found at 14
[Code]...
I know this is an easy task, especially using cPanel. However I want to do this without formatting the drive, since there is sensitive data already on the hard drives. So how would I mount a hard drive, but not format/lose any of the data already on it?I've looked and everything seems to lead me to believe that I'll lose data if I do it that way.
View 7 Replies View RelatedOpenSuse 11.2 64bit When I select a hard drive in Dolphin file manager it asks for the root password. I would like to gain easier access to the drives. The Yast Partition Manager lists all of the drives and has a dialog box to change this i.e. user can mount the drive. Can we change this feature on the run, while the system is running ? The Fstab file is not listing all of the drives, so I cannot just edit the config here.
View 4 Replies View RelatedI've been struggling with this one for a while - I have three SATA hard drives installed on my system:
/dev/sda - an 80 GB disk with three partitions, one NTFS for WinXP, one ext4 for Fedora 11 x86_64, and a boot partition
/dev/sdb - a 250 GB disk with one partition, ext4
/dev/sdc - a 250 GB disk with one partition, ntfs
I can mount any partition on /dev/sda without problems - everything works exactly as expected. Attempting to mount a partition from one of the other disks results in something like the following (this is for sdc1):
Code:
[User@machine ~]$ sudo mount -t ntfs /dev/sdc1 /mnt/shared
[sudo] password for User:
ntfs-3g: Failed to access volume '/dev/sdc1': No such file or directory
ntfs-3g 2009.11.14 integrated FUSE 27 - Third Generation NTFS Driver
XATTRS are on, POSIX ACLS are off
Copyright (C) 2005-2007 Yura Pakhuchiy
Copyright (C) 2006-2009 Szabolcs Szakacsits
Copyright (C) 2007-2009 Jean-Pierre Andre
Copyright (C) 2009 Erik Larsson
Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
Options: ro (read-only mount), remove_hiberfile, uid=, gid=,
umask=, fmask=, dmask=, streams_interface=.
Please see the details in the manual (type: man ntfs-3g).
Example: ntfs-3g /dev/sda1 /mnt/windows
Ntfs-3g news, support and information: http://ntfs-3g.org
The /mnt/shared directory is created; the failed to access error is related to the disk.
Here is the output from fdisk:
Code:
[User@machine ~]$ sudo fdisk -l
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0f970f96
Device Boot Start End Blocks Id System
/dev/sdb1 1 30401 244196001 8e Linux LVM
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1050104f
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x8e538e53
Device Boot Start End Blocks Id System
/dev/sda1 1 6375 51200000 7 HPFS/NTFS
/dev/sda2 * 6375 6400 204800 83 Linux
/dev/sda3 6400 9729 26743361 8e Linux LVM
Disk /dev/dm-0: 21.4 GB, 21428699136 bytes
255 heads, 63 sectors/track, 2605 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 5955 MB, 5955911680 bytes
255 heads, 63 sectors/track, 724 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-1 doesn't contain a valid partition table
Disk /dev/dm-2: 250.0 GB, 250059348992 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0f970f96
Device Boot Start End Blocks Id System
/dev/dm-2p1 1 30401 244196001 8e Linux LVM
Disk /dev/dm-3: 250.0 GB, 250056705024 bytes
255 heads, 63 sectors/track, 30400 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-3 doesn't contain a valid partition table
And also from blkid (this does not match the output from above - but I don't know if this is actually related to the problem or how to fix it):
Code:
[User@machine ~]$ sudo blkid
/dev/sda1: UUID="506412E06412C91C" TYPE="ntfs"
/dev/sda2: UUID="811bf259-33d5-4db2-9851-e93b47dcbcc8" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda3: UUID="U3AJLH-Lhm1-b0lf-HDX9-ZK1V-ezqU-sb0YGQ" TYPE="lvm2pv"
/dev/dm-0: UUID="f5733171-0753-4f53-834b-cc693ffb0aed" TYPE="ext4"
/dev/dm-1: TYPE="swap"
/dev/mapper/vg_machine-lv_root: UUID="f5733171-0753-4f53-834b-cc693ffb0aed" TYPE="ext4"
/dev/mapper/vg_machine-lv_swap: TYPE="swap"
Just installed natty 64 bit. fully updated the system. i need to hard drives to automaticaly mount when starting the computer. What is the easiest way to do this in natty?
View 9 Replies View RelatedI'm not sure how to do this. I checked the hard drive preferences and looked through the forums... I don't want to manually mount my hard drives(s) every time I boot up just to access my music and wallpapers.
View 5 Replies View Relatedis their any way to change the mounting location of your hard drives so when you click a certain hard drive in nautilus, it'll go to that location instead of the default one?
View 2 Replies View RelatedI have brought an ipod of my friends with a lot of movies and i was then running on windows. The Whole sys was infected and I reloaded the windows operating system but it worked fine only upto two restarts. Then I started and completely successfully installed fedora core 10 i386. I Have very much important information in the windows hard drives. Please tell me anyone how to mount these partitions from the beginning.
View 2 Replies View RelatedJust installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).
There is a question I cannot find answer to.Should hard drives be mounted in the computer's case hard (screwed to wall) or soft (suspended by means of rubber washers)? And the same question about DVD drive which vibrates far more than a hard drive.
View 6 Replies View Relatedsyslog, messages and kern.log are incredibly huge files that are taking up a lot of space on my hard drive. Is it safe to remove them and/or to reduce logging so it doesn't take such an enormous amount of hard disk memory? If so, how can I reduce the logging so it doesn't produce logs that are 10s of GB in size?Also, mounting a drive places it into the folder /media. Will it become problematic if the size of the mounted drive exceeds the amount of free space available on my Ubuntu partition?
View 4 Replies View RelatedI suspect this is not new but I just can't find where it was treated. Maybe someone can give me a good lead.I just want to prevent certain users from accessing CD/DVD drives and all external drives. They should be able to mount their home directories and move around within the OS but they shouldn't be able to move data away from the PC. Any Clues?
View 2 Replies View RelatedThis is probably a stupid questions but it's a pet peeve of mine. I have three hard drives you have to actually open them before they show up in other areas/on the desktop.Is there a way that when ubuntu starts they just automatically are detected?
View 3 Replies View RelatedI have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies View RelatedDoes anyone else have this problem. Came just after recent update and is highly annoying. Plug usb device in and it is recognized on lsusb but not mounting and appearing in media folder. How do I solve this. Searched the forum but nothing useful
View 10 Replies View RelatedI would like to exec a script whenever a user mount a device. The device could be an internal device (for example a partition on a second hard disk) or a removable one (for example a usb hard disk). The script must have sudo capabilities even if the user is not included in the admin group. Is it possible?
The specific question:
I would like to add acl option to a device whenever it is mounted.
I tried fstab but it's changing the behaviour of nautilus see:
[URL]... so I would like to create a script with the command
Code:
sudo mount -o remount,acl /media/data
and auto execute it any time data is mounted.
I boot several Redhat based distributions, Fedora 15, Fedora 14, CentOS, Scientific Linux, Redhat and occasionally something non-Redhat based like Ubuntu and Debian. Out of habit and preference I frequently set up partitions to be auto mounted at boot through fstab. Somewhere in time something went seriously wrong with the CentOS install. There are a ton of permission denied errors while booting CentOS (text style boot) mostly regarding shared libraries. The system will boot to the desktop and everything looks OK but some things don't work. I can't update the system because I have no network connection. I obviously can't get to the Internet or get e-mail. I can open a VT but can't log in as regular user or root.
Permission denied in both instances. I didn't make any drastic changes to the CentOS system, just minor tweaks. The culprit in my opinion is a combination of the fact that one of the other Linux systems did an SELinux relabel while booting and the CentOS partition was already mounted. Since the CentOS partition was mounted it too was relabeled. I can't prove this. If there's a way to prove it then I just don't have the skills or knowledge to do so. It's basically a theory based on what I know I've done with the several installed distributions. This is not a rant nor is it a request for help. Just a comment. An assumption, hopefully a correct assumption. The CentOS install was working flawlessly until something happened and I think that something was the SELinux relabel.
how to stop gnome in fedora 13 from automounting the cdroms i insert? i just want it to ignore them.
View 4 Replies View Related After a bit of searching, I haven't found a discussion on how to mount an external device using hardware attributes, though I am almost certain I have seen discussions on this in the past. The objective is to consistently mount an external USB drive at the same mount point regardless of the order in which a user attaches other external USB drives. For instance, if I run lshw, I can find harware properties of the device:
Code:
*-usb:1
description: Mass storage device
...
physical id: 6
[code]...
I'd like to identify this device by the serial number and mount to a pre-defined mount point (e.g. /mnt/extUSB). I can write a script involving lshw,dmesg, and mount but I vaguely recall a more clean/ preferred method.
i am using fedora 14. Each time i login i have to manually mount my windows drives. Is there any script or system setting which will help me to auto mount my windows drive on startup.
View 3 Replies View RelatedI have an 320GB hard drive with F11 installed. Lately, I got a 1.5TB new hard drive, on which I have installed F12. Now I want to use the 320GB as a second hard drive since I have lots of data on it. My question here is as I boot my desktop, how does it recognize to boot from the 1.5TB and consider the 320GB as a secondary? Is there anything I need to setup in BIOS? My motherboard has one extra SATA connection left for a second hard drive.
View 6 Replies View RelatedI am having issues mounting my non-OS hard drive (/dev/sda).I had the following information in my /etc/fstab file:/dev/sda /mnt/storage auto defaults 0 0This worked as expected; however, I decided the modify this so I can have it automounted to my home directory (/home/jesse/storage)./dev/sda /home/jesse/storage auto defaults 0 0This /mnt/storage remains intact even after rebooting the system.
View 6 Replies View RelatedI am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies View RelatedI'm trying to mount a hard drive, but I get an error. $Logfile indicates unclean shutdown (0,0) Failed to mount '/dev/sdb1': Operations not supported Mount is deniedbecause NTFS is marked to be in use.it gives me some optionsmount -t ntfs-3g /dev/sdb1 /media/System -0 force (and error not found)/dev/sdb1 /media/System ntsf-3g force 0 0 (i get permission denied) All done as root. I have had no problem before mounting hard drives like this. So I don't know what the problem may be.
View 1 Replies View RelatedI am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
View 4 Replies View RelatedI have two identical 73 GB Scsi ulta320 scsi drives, Fedora web server is install on one drive with all web files and etc. I wish to make an exact clone of the drive that will boot and run everything as the current drive does now. Is there a download of a program I could download or purchase that would boot and make an exact clone to do the above.
View 6 Replies View Related