Software :: Upgrading Firefox On System?
Nov 12, 2010
I'm running a dual-boot with Windows 7 and Linux Mint Debian.
My firefox version is 3.6.8
If from my firefox browser I go to Help/CheckforUpdates, I get the following message:
"Unable to Update"
A recommended security and stability update is available, but you do not have the system permissions required to install it. . .
does anyone know of a how-to as to how to manually upgrade my firefox to the latest version (including how to purge the existing version from my system)?b
View 4 Replies
ADVERTISEMENT
Mar 9, 2010
I'm having problems upgrading my FF browser from the standard 3.5 up to 3.6. This is a 64bit system, & if I can provide any other info about it, just ask.I've searched this forum for the help I'm looking for, but I have not yet seen an acceptable answer. If this has glitches, or is too complicated, I won't even bother....3.5 is fine for now, but it would be nice to upgrade.
View 1 Replies
View Related
Apr 20, 2011
I'm trying to upgrade my firefox installation to version 4. But it seems there are slight problems. What I did was:
Code:
sudo add-apt-repository ppa:mozillateam/firefox-stable
sudo apt-get update
sudo apt-get upgrade
In a CLI.
When I open firefox it's still the old version. If I in a terminal write firefox -v it tells me it's version 4.
View 5 Replies
View Related
Apr 30, 2010
Firefox didn't want to start after I upgraded to 10.04. Finally, I found if I tried to start it from the command-line, it would seg fault:
[Code]....
Attempting to load the system libmoon Segmentation faultI tried using synaptic to remove the nonfree flash plugin, but that didn't help. Even after removing it, some files were still left, and those were dated 2007 and 2008. I manually deleted them:
[Code]....
View 6 Replies
View Related
Oct 11, 2010
I upgraded to ubuntu 10.10 yesterday, and now I have no bookmarks, no addons, and my preferences are reset.I figured I just had to reinstall all of the addons, but it's not letting me. It lets me download the addons, but as soon as I click "install addon" from the box that pops up, it goes to the addons dialog.However, it doesn't say "You must restart firefox to complete the installation" like it usually does, and there is no indication that I have installed anything at all. I've tried many times with many different addons, and it doesn't let me install any of them. Is anyone else having this issue?
View 2 Replies
View Related
Mar 29, 2010
I have Firefox 3.0.18 and can't find a way to upgrade to 3.6. The Synaptic Package Manager says Firefox is already installed, so I uninstalled it but the re-install just gives me 3.0.18 again! I have downloaded the tar file.
View 8 Replies
View Related
Jun 16, 2010
Upgraded my system to ubuntu 10.04 and its looking good. Problem is, i have no sound on firefox. I'm not really too sure where to start looking to fix this, can anyone offer me any direction
View 9 Replies
View Related
Jan 26, 2010
I just upgraded Firefox from updated yet ancient version 3.0.17 to modern 3.6 using Firefox-stable repository March 15, 2010 update: Firefox 3.6 works perfectly on Hardy 8.04 using firefox-stable repository Quote: Originally Posted by OUTDATED INFORMATION SINCE THE BUG WAS FIXED I ran into two problems.
1. Firefox packages conflicted. I had to manually force-remove firefox-3.0 to install firefox-3.6.
2. Firefox 3.6 was not able to start. It was giving some kind of an error message. I worked around the problem by creating a new profile. but my old 3.0 profile with all my stored passwords, bookmarks, etc is unusable in 3.6
View 5 Replies
View Related
May 26, 2010
Several days ago I posted a query about the effects of upgrading from 8.10 to 9.04 in regards to Thunderbird/Firefox emails and settings. I wondered if I would lose all of my emails, addresses, bookmarks if I make this upgrade. So far there have been no responses. Maybe it is such a dumb question that no one cares to take the time to respond. I understand that I can save addresses as ldif files and I can save bookmarks and re-import them, and I can save my profile (which should contain all of my old emails), but I've never gotten the profile thing to work properly.
View 2 Replies
View Related
Mar 21, 2011
After upgrading to firefox 4 rc, scim stop working. When ctrl+space pressed, nothing happened. (with latest scim package:
[Code].....
View 6 Replies
View Related
May 31, 2011
I have been windows using for over years and now after seeing Linux in couple of colleagues desk, I liked and have installed Linux in my home desktop (Fedora 14). After installing Fedora 14, I tried upgrading my browser Firefox from 3.6.17 (which came by default) to Firefox 4.0. I googled and got the procedure for upgrading tirefox. from this link [URL]. I followed the exact steps and while I tried to install I get the following error. I tried enough to get rid of this problem but all attempts in vain.
The Error that I get is:
[root@localhost yum.repos.d]# yum install firefox4
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora-firefox4. Please verify its path and try again
[root@localhost yum.repos.d]# yum install firefox4
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
repos.fedorapeople.org/repos/spot/firefox4/fedora-15/i386/repodata/repomd.xml:
[Errno 14] HTTP Error 404 : repos.fedorapeople.org/repos/spot/firefox4/fedora-15/i386/repodata/repomd.xml
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora-firefox4. Please verify its path and try again
[root@localhost yum.repos.d]# ls
View 6 Replies
View Related
Jan 23, 2010
When I use a package manager (aptitude or synaptic) to install updates to firefox (3.6), I get the following error:
[Code]...
View 1 Replies
View Related
Feb 10, 2010
Since I upgraded my browser to Firefox 3.6, I've been experiencing this problem: when I click on a link in an email, Firefox doesn't go to that link. Instead, a new instance of Firefox is started (even if I've already got an instance of Firefox running), and that instance just opens my homepage. Of course I can work around this problem by right-clicking on the link, selecting Copy Link Location, then manually pasting the URL into Firefox. But I'd prefer to use just one click rather than 6.I'm using the latest official Hardy version of Evolution (2.22.3.1), and I've got Firefox 3.6 set as preferred browser (or "default browser" or whatever it's called in Ubuntu).
View 5 Replies
View Related
Nov 28, 2010
I got an error during the upgrade but chose to let the upgrade complete. Now my Firefox won't lauch. I tried uninstalling and reinstalling it from the Terminal and got the following:Quote:
rick@Desktop:~$ sudo apt-get install firefox
[sudo] password for rick:
Reading package lists... Done
[code]...
View 1 Replies
View Related
Feb 8, 2010
I only began using Linux with the release of FC8. I've upgraded into every new version (upgrade, no clean installs), after the new versions had been out a while. I struggle with command lines, updates, cups and other very cool tools that are only difficult because they have so many options. I'm Windows guy at work, a system admin and db administrator, plus the company expert on Excel. But, all in all, I hate Windows, and I'm loving Fedora, even if I struggle.
This last upgrade really kicked me in the pants. The first thing I noticed was all of my software sources were gone. I did some research around the forum and tried a few things, but it's still not working. Unfortunately, I may have uninstalled Yum in the process, but not rpm. I've tried to re-install the yum packages, but still no luck.
This morning before leaving for work I noticed that a boot log indicated that cups had failed. I went in to restart the service (through gui) and it said it was running. So I stopped the service and re-started. I tried to access port 631 through Firefox and it wouldn't open. I need to check the firewall to see if it's an open port, but beyond that I don't know.
Now I'm wondering if I should just do a clean install. I haven't done this, mainly because I didn't want to hassle with setting up my printer again (although, it's a Brother and they have the drivers and good instructions), and I didn't want to lose any emails that I've received via Thunderbird. The printer is really a non-issue now, as I'll have to set it up anyway. I have a backup of the /usr folder and all the documents. Question is, if I restore the Thunderbird folder after a clean install, would it bring back my email?
View 3 Replies
View Related
Sep 6, 2011
I am having problem while upgrading system from Squeeze to sid. when I execute the command apt-get dist-upgrade, I got the following o/p:
root@Utkal:/home/utkal# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 3 Replies
View Related
Feb 7, 2016
Normally I use apt-get for to upgrade my Debian system. Today i tried to compare apt-get and aptitude with respect to system upgrade. Surprisingly I got different results.
Code: Select allsudo apt-get upgrade
Reading package lists... Done
Building dependency tree   Â
Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
openjdk-7-jre openjdk-7-jre-headless
The following packages will be upgraded:
 libtiff5
1 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
Need to get 213 kB of archives.
After this operation, 44.0 kB disk space will be freed.
Code: Select allsudo aptitude safe-upgrade
Resolving dependencies...       Â
The following NEW packages will be installed:
 libsctp1{a} lksctp-tools{a}
The following packages will be upgraded:
libtiff5 openjdk-7-jre openjdk-7-jre-headless
3 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 45.9 MB/45.9 MB of archives. After unpacking 9,130 kB will be used.
What is behind these results? Which method is safer?
View 5 Replies
View Related
Sep 24, 2010
I recently bought 2 RAM modules, 1GB each, to upgrade my system replacing the 460 MB I had before.Once replaced, I started my system and checked with 'free -m' that the system can see them and uses them.But my system became unstable, and it gets stuck (hangs) after 20-40 minutes and I have to do a hard reboot to get it back to work.
Also flash-player crashes few minutes after playing no matter which browser I use.
I have made an upgrade after installing my new RAM and have the latest Kernel installed.
I am using Ubuntu 10.04 (Lucid Lynx)
View 13 Replies
View Related
Aug 28, 2009
i heared that in fedora 11 with new kernel version comes ext4 as default file system. when i was upgrading fedora 9 --> 10, i just changed repos in /etc/yum.repos.d. now the question, if i upgrade my system, will my file system got changed, and if it does, will my data got damaged?
View 4 Replies
View Related
Aug 17, 2011
When I was trying to upgrade my fedora 13 system to fedora 14 through preupgrade,there was an error message as show below: Cannot retrieve metalink for repository: fedora. verify its path and try again How to upgrade my system to fedora 14.
View 1 Replies
View Related
Jan 18, 2010
I have just found a 120gb scsi drive which i would like to use as my system drive instead of my current 80gb scsi drive. I cannot simply plug the drive in for extra storage as i don't have a spare scsi slot! only have 2 and one is for the dvd-drive
is it ok just to dd the one onto the other? can i do this whilst the system is live? or should i use a live cd? or better still put both drives into a separate linux box?
its currently formatted to ext3.
plus would i need to use any special switches using the dd command? or would it simply be :
Code:
dd if=/dev/sda of=/dev/sdb
just trying to avoid a re-install!
View 1 Replies
View Related
Jun 19, 2010
I avoided upgrading to 10.04 when it was initially released because I couldn't afford for anything to go wrong with my computer around exam time. Sure enough, when I decided to upgrade today, the process got about halfway through and then gave me an error and left me with an unbootable system except in a recovery terminal.
In this terminal I discovered that most of the packages the upgrade wanted to configure depended in some way on shared-mime-info or desktop-file-utils. Configuring these with dpkg --configure gives me an error along the lines of:
Code:
undefined symbol: g_malloc0_n and an error code of 127. So, dpkg leaves those packages and consequently can't configure many of the subsequent packages in the dist-upgrade.
View 5 Replies
View Related
Feb 5, 2011
Can anyone explain to me how I can auto block my Ubuntu system from upgrading to 10 from 9?
View 3 Replies
View Related
Apr 7, 2011
I got a really bad virus on my main computer and decided I should just install Ubuntu like I previously had installed on a laptop. Anyway, I used an old 7.10 install disk that I usually use and I upgraded from 7.10 to 8.4 LTS (that went off without a hitch), but when I upgraded from 8.4 LTS to 10.4LTS the install hung up at one point. The system was stuck 7 minutes from completion trying to set up the rsyslog. I left the dialog box up for 3 hours to no avail. I proceeded to reformat the drive to try again and it ended the same way. I currently have the system with the install dialog up and stopped at the setting up of the rsyslog.
Here is a picture of the install window:
View 8 Replies
View Related
Aug 23, 2009
I am using fedora 8. I want to upgrade my system but I don't have internet connectivity I cannot use yum can any body tell me from which site I can get all the rpm packages specially gcc, glibc so that I can take them in my pen drive and install in my f8.
View 3 Replies
View Related
Aug 9, 2010
I hope this is posted in the right forumI have a dual boot ubuntu 10-4 and windows vista each on a separate 500 GB drive.nt to install Windows 7 in place of vista but I understand that there are some issues with grub 2 if vista and linux are already installed.Also can it be done from within Vista as an upgrade without doing a complete reinstall.I also wondered if installing windows 7 as a virtual box would be a better option.only have a few programs that I need to run in windows but I do use them regularly.
View 5 Replies
View Related
Feb 10, 2010
After upgrading from 9.10 to 10.04 my System no longer boots. I had a Dual-Boot System. On Boot I get - "error : the symbol 'grub_puts_' not found grub rescue> (prompt):
If I run 'insmode /boot/grub/normal.mod' (I get the same error)
If I run 'insmode /boot/grub/ext2.mod' (I get 'The symbol 'grub_xasprinf' not found)
If I run ls /boot (The Kernel File Names look Ok)
If I run in Rescue Mode it Reports (The installer could not find any partitions, so you will not be able to mount a root file system. This may be caused by the Kernel failing to detect your hard disk drive or failing to read the partition table, or the disk may be unpartitioned. If you wish, you may investigate this from a shell in the installer environment.) I ran the recommended reporting script and got the following output:-
Code:
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Syslinux is installed in the MBR of /dev/sdd <<< This is my USB Flashdrive .....
View 2 Replies
View Related
Apr 1, 2010
I don't use Windows that often but thought since I have a copy of Win7 I might upgrade from the XP I'm currently using. I'm anticipating several issues, first Grub, can I get it going again after the Win7 upgrade without messing with my current Ubuntu install? the next issue is Win7 will want to make a "boot" partition, does this create any problem with partition names for Ubuntu? can this be solved by making the windows "primary" partition and using an extended partition inside that? is there anything I'm missing?
View 9 Replies
View Related
Oct 1, 2010
so, I was just upgrading to the new release of Ubuntu and didn`t notice that laptop was running on battery, then it was switched off.Now I can open Ubuntu system, can`t reach to login page.the other two systems are ok, XP and Pardus.how do you think I can recover ubuntu?
View 4 Replies
View Related
Apr 30, 2011
i had a dualboot configuration of win7 ubuntu 10 on separate partitions no wubi.my windows system is encrypted so i had truecrypts password prompt then an easybcd selection for windows and ubuntu.i have got a back up of the truecrypts bootloader "last bootloader" no file extention.but how can i reconfigure the system since after upgrading i can only boot in ubuntu.what software should i use.
View 2 Replies
View Related
