I have installed truecrypt on a Fedora 14 system. I have finally got truecrypt to mount a volume(only thru a terminal window). but when I try to look at the files in the volume, I get the following message:
Nautilus 3364: Eggsmclient Warning : Failed to connect to session manager. None of the Authentication Protocols specified are supported. Glib-GIO error: gdbus connection c2270: initable_init assertion failed. (Connection >initialization error==null) I made sure that Nautilus was alive and working.
I tried to install truecrypt by executing the setup file and the terminal opened.At the end of the terms of license I agreed. To start installation I was asked to enter my root passwordbut which was not accepted (I restarted the process again and again, the password was entered correctly)
I am having trouble getting my laptop set up the way I want it. I want to install Fedora 13, using Ext4 encryption, and I also want to install Windows 7 encrypted using TrueCrypt.
On boot, I would like to have Fedora 13s GRUB, offering me the two OS choices. If I select Fedora, then Ill get the cool graphical decryption screen, and if I select Windows 7 Ill get the TrueCrypt boot loader prompting me for the decryption key for the Windows 7 partition. Can anyone give me instructions on how to get this set up?
Installed Truecrypt onto openSUSE 11.3 (KDE) and noticed that Truecrypt needed to be started as root.Modified visudo using YAST asusername ALL = NOPASSWD: /usr/bin/truecryptHowever, when copying files from my backup drive into the Truecrypt partition, there is an access problem (couldn't remember actual error message)In Konsole , updated visudo to username ALL = (ALL) NOPASSWD: /usr/bin/truecrypt Copying is allowed and working fine.Question:1. What is the difference between the above two visudo setting?2. How to updated visudo to the second setting in YAST?3. How to change the editor for visudo in konsole using nano instead of vi?
I currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
I used Truecrypt in Windows and it worked pretty well. I tried to install the program on Ubuntu but got some problem. Here is what I did and the problems I got:
1. I downloaded the standard 32-bit tag.gz file from [URL]
2. Extract the file onto desktop
3. Installed by double clicking and run in terminal or directly run in terminal (I assume they are equal)
4. Follow the instructions till 'Press Enter to exit'.
For me it seems that the program is installed successfully, and the icon shows up in the Application- Accessories menu. However, it doesn't respond at all when I click the icon. For most of the software I used in Windows, I have already found equivalents that are working fine. And I really don't want to go back to Windows because this program.
After having encrypted my windows partition, truecrypt overwrote my mbr, and now I can't access grub during boot, not even when I press escape I was thinking of restoring my original mbr with the truecrypt rescue cd, boot into ubuntu and copy the mbr to the ubuntu partition, how to do it.
right now I have windows 7 encrypted with truecrypt and I want to dual boot Ubuntu 10.04(not encrypted). I'm going to shrink my windows partition to install Ubuntu. Is there a way to add ubuntu to truecrypts bootloader?
Right now I only have Windows 7 64bit installed. I'd like to keep it installed and have a hidden Truecrypt system partition that holds Ubuntu. I've installed Ubuntu once before, but it was a while ago so I don't remember the details. Also, I'm not entirely sure how to work Truecrypt as I've never used it before. Do I install Ubuntu first and then run Truecrypt, if so, how do I deal with the fact that installing Ubuntu involves many partitions. Does Truecrypt recognize this automatically or do I have to somehow encrypt them all?
I really haven't used Fedora that much lately. I decided to give 14 a try and I wanted to duel boot with LXDE in case Debian SID crashes or there are other issues. Brief run down. I have both Debian and Fedora on seperate hard drives, both Encrypted LVM. Each hard drive has, of course, a boot partition that is not encrypted.
Now my issues are this. Fedora does not want to see Debian, Debian does not want to see Fedora (Lover quarrel I think.) Anyways I decided to just install G.A.G boot loader to the MBR and have grub installed on the boot partition for both Debian and Fedora. This worked great for Debian. However I can't seem to get the same grub commands to work with Fedora. As root I can't update-grub at all and when I try to grub-install to Fedora's boot partition it tells me that partition is not in the BIOS.
Now Truecrypt installed fine. But it will not run at all. Not when I click it in the accessories menu or if I try to run it for the command line. This is the first distro I ever had issues with concerning Truecrypt.
I want Truecrypt to ask for password for Windows XP as usual but with the standard [ESC] option, on selecting that, i.e via Escape key, I want it to find the grub for the (unencrypted) Ubuntu install. I've installed Windows XP on the 120Gb hard drive of a Toshiba NB100 netbook then partitioned to make room for Ubuntu 10.04 and installed that after the Windows XP install. When I encrypt Windows XP, Truecrypt will overwrite the grub entry in the master boot record (MBR), I believe (?) and I won't be able to choose between XP and Ubuntu anymore. So I need to restore it back.
My setup:
Partitions: Windows XP, NTFS (to be encrypted with Truecrypt), 40Gb /boot (Ext4, 1Gb) Ubuntu swap, 4Gb
[code]....
The key area of the problem is how to instruct Truecrypt when escape key is pressed, and how the Grub/Ubuntu can be made visible to the truecrypt bootloader to find it, when the esc key is pressed. Also knowing as chaining.
I've been trying to get a dual-boot system with a truecrypted Windows partition and grub 2 in combination to work successfully and to date, I haven't had much luck. I'm using the grub 2 version from Ubuntu 10.04.2 LTS.I understand from searching through Google that there is presently no easy way to chainload the Truecrypt boot loader from Grub 2 in a similiar way that was done with Grub 1. This is because the Grub 2 payload is much larger and actually overwrites some of the Truecrypt boot loader, preventing it from starting.Does anybody know what might be going wrong here? I've been looking for ages now and can't seem to find any solution to this problem apart from restoring the Truecrypt loader to the hard disk and trying to chainload Grub 2 from Truecrypt. I'd rather use Grub 2 as the main loader though as Ubuntu Linux will be the main operating system in use.
I downloaded truecrypt Linux version, giving me a file named truecrypt-6.3a-ubuntu-x86.tar.gz. I assume that's the archive. Double clicking on that produced file truecrypt-6.3a-setup-ubuntu-x86. I assume that's the executable. When I try to run that, I get a "could not display ... unknown filetype" error. Could someone tell me what I'm doing wrong? I plan to run truecrypt under the easycrypt GUI.
I previously made a question about this and there was an Ubuntu deb package that you could download from Truecrypt's website. But there's no longer any deb packages there's only a .tar package containing a .sh script.When I run the script and install it says that I'm missing these two things. How can I download these two packages using aptitude?Requirements Truecrypt- FUSE library and tools- device mapper tools
I am trying to install TrueCrypt in ubuntu 9.10 and I am having troubles. When I to extract the tar.gz that the program comes in, I get this error:
'gzip: stdin: unexpected end of file tar: Unexpected EOF in archive tar: Error is not recoverable: exiting now'
The file also comes with a PGP file. (tar.gz.sig.). I am not sure how to use the signature file to open the archive. Here is the site I downloaded from: [URL]
I checked out this forum but still no solution for my problem. I tried to install Truecrypt, but I can't get it fixed. I extracted truecrypt-7.0a-setup-x64 to Desktop. Then in typed in terminal: sudo sh truecrypt-7.0a-setup-x64. The terminal asks my password and I type in my password and hit enter. The terminal disappears and nothing is happening.
Is it possible to mount truecrypt volume at start-up with Xorg being disabled? I found only issue on automatical mounting TrueCrypt volumes for Gnome. We just add to /etc/gdm/Init/Default
Code: truecrypt /home/workimage.tc /home/work
And where can I set a rule for system to mount volume from console tty1? And, i'm wondering is it essential to unmount volumes each time i shut down my PC? And if yes, where can i set this rule too.
I've tried to compile it by myself, but since I do not know all libraries / compiler programs and assistant programs to be installed beforhand, great frustration has appeared ("g++ not available" etc. ...)Is anybody here who can publish a simple and perfectly understandable tutorial of how to compile Truecrypt for PowerPC architecture from source?
've been using truecrypt for quite sometime now and, because of that, I want to make a .deb package out of the x86_64 precompiled tarball one's able to download via their site. I'd gain know how on this specific package building, would integrate the resulting package in the apt-management, etc..How can I do this? No "making" required. It is just a .deb repack of the precompiled truecrypt.
how I can install truecrypt on Opensuse 11.2 32 bits. I've made a search trough Yast and the opensuse 1-click install website but could not find any package for truecrypt.
Is there an alternative way to install with software? so any solution that does not fall into the category of Yast or web-based installation of packages will be exotic for me
I installed truecrypt but it didn't open, I don't know why, maybe it needs gtk libs to work. so I'm looking for an alternative KDE app that at least can open truecrypt files.
I've accidentally encrypted my 8GB usb stick instead of my 4GB stick and now I need to revert the encryption on the 8GB one. There doesn't seem to be an option like this in the TrueCrypt interface when I mount the USB.
I've been looking at setting up truecrypt on my laptop, but the guides on the truecrypt site and the ubuntu documentation seems to be incomplete or not address what i want to do.
What I have:
dual boot windows 7 / Ubuntu (lucid)
What I want is to dual boot with the hidden OS system:
Windows 7 (plausable) Ubuntu (plausable) Ubuntu (hidden install)
Is this possible? or is it better to make a hidden /home partition?
Downloaded the 64 bit console only package, attempted to run and got this error message:truecrypt: error while loading shared libraries: libfuse.so.2: cannot open shared object file: No such file or directory
I work for a all-in-one IT company, basically businesses hire us and we will fix all their problems from servers to pencil sharpenersI want to get some background with UNIX so i wanted to multiboot linux on my laptop and use it for a few weeks. After a few hours of trial and error i managed to install it! So to the point: i used Truecrypt to encrypt my laptop and it used a special boot loader that made me input the password just after the post.My question is, can i use Truecrypt with a multiboot 7/ubuntu? After it took me hours to install this , running into and trouble shooting various problems that were probably just my ignorance, but Linux feels very fragile and i do not want to screw it up.
TrueCrypt offers 3 hashes for use: RIPEMD-160, SHA-512, WHIRLPOOL.What do most people use? How does one go about deciding which one is appropriate for them? Do they differ in security or performance?
