Ubuntu Multimedia :: Tv Tuner Card Works Fine In Windows7 But Not In It

May 18, 2010

Gateway desktop running Ubuntu LL 10.04(64 bit) with Asus/ViXS Combo-210E NTSC/ATSC TV Tuner card: link to card... [URL] Ubuntu lists the card when I do lshw in a terminal but it shows as 'unclaimed'. Is that important? Also what software is neccessary to watch tv? The card works fine in Windows7

View 6 Replies


ADVERTISEMENT

Ubuntu :: Use HDMI To Connect To Lcd TV It Works Fine In Windows7?

Nov 14, 2010

Though I had solved this but I was premature. Here are the details. When I use HDMI to connect to my lcd TV it works fine in Windows7. (I have dual partitions W7/Ubuntu),but when I boot into Ubuntu and use HDMI, nothing happens.

lori@lori-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

[Code]...

also when I open the Gnome Alsa Mixer, under the HDMI tab, there is just a blank screen. I believe I have the latest Alsa releases.

View 4 Replies View Related

Ubuntu Networking :: Wireless Card Disabled But Works Fine In Windows 7 / Sort It?

Oct 29, 2010

I just got Ubuntu and am new at this stuff. I have a dual boot windows 7 64 bit one and ubuntu 10.4. I booted ubuntu at startup and then tried to go online, but it says my wireless device is disabled. I tried pressing the keys on my keyboard to see if that may work, but it doesn't. I am lost and new at this.

View 1 Replies View Related

Ubuntu Multimedia :: TV Tuner Card For PC ?

Apr 1, 2011

I haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.

View 1 Replies View Related

Ubuntu Multimedia :: Can't Change Tv Card Tuner?

Feb 20, 2011

I have 2 tv cards that I have successfully configured to work in linux.But this 3rd one I bought recently seems to have a problem. The card is not autodetcted (that's really not the problem) but when I try to load saa7134 with:sudo modprobe saa7134 card=xx tuner=xx, it loads whatever card I indicate but the tuner never changes. This is part of the output of dmesg:

Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[code]....

View 3 Replies View Related

Ubuntu Multimedia :: TV Tuner Card No Audio?

Jun 2, 2011

I have a pinnacle 800i that i just setup and video to work which was a pain but now i cant get audio to work.

View 3 Replies View Related

Ubuntu Multimedia :: Setup Tv Tuner Card With Vlc?

Sep 1, 2011

I have a sabrent tv tuner card (tv-pcirc). I want to use it in vlc but don't know how to change from the composite source to the tuner source and from there don't know how to change channels (is there a program that generates channels.conf for analog channels?) It would also like to know how to record a certain channel for a certain period via the telnet interface. Another thing I would like to know is how to set up the remote with it, because the audio is very soft and I would like to raise the voume.

My card is using card=42 tuner=43.

View 3 Replies View Related

Ubuntu Multimedia :: Flash Works Fine In All Browsers Except SwitfoX?

Dec 7, 2010

i'm running 10.04 x64, with the latest versions of google chrome, chromium, opera, epiphany, firefox, and swiftfox.

strangely, flashplayer works fine in all of them except swiftfox, where it presents a garbled, unclickable video window (tested in videos).

all my other ff addons and plugins seem to work ok in swiftfox, so i assumed that swiftfox is just reading and using everything in ~/.mozilla, including flash. but perhaps not. anyone have any idea why ff's flashplayer doesn't work in swiftfox?

View 3 Replies View Related

Ubuntu Multimedia :: Blank Screen During Boot - DOS Works Fine?

Feb 14, 2011

I have an Acer Aspire One AOA110 (SSD version that came w/ Linpus Lite) that my brother gave to me several months back when it stopped working. I've been trying various ways to revive it or make it useable, but haven't had any luck so I figure it's time to look to the community for ideas. I have already updated the BIOS to the latest (v3310) version, so I don't think it's the common issue these netbooks have where they don't even post. I'm kind of thinking the GPU died halfway or something. If I could just get it to work in a command line only mode, I'd be happy.

The netbook will post fine, but when I try to boot into Linux, the screen will go blank part way through the boot process. I don't ever remember hearing sound afterwards so I don't know if just the screen is blank or if the computer is locked up as well. I have tried several distros, but all of them seem to run into the same issue. Some with text based installers (Debian) get all the way through the install, but won't get all the way through the boot process. I'm only trying to get to a command line, not into X or anything graphical. Arch Linux also uses a text based installer, but I couldn't even get into the installer before the screen goes blank. I've tried changing some of the kernel options such as nomodeset, vesa and framebuffers options, but didn't have much luck with them either. I've also tried some older versions of Ubuntu (I think back to either 8.04 or 8.10) and tried the text installs, but I can't remember if I couldn't get into the installer or if I just couldn't boot, I want to say I couldn't even install. Mind you it's not random, it's always at the same point for a particular distro.

So the other small twist to this all is that FreeDOS works fine, besides not being able to get the sound card or network card working. I can play games, set different resolutions in ZSNES, etc. This seems a little odd to me, but I'm hoping it makes perfect sense to someone reading this.

I want to be able to run Linux with a command line interface, but I can't find the right distro/settings/whatever that it stays in the video mode (vesa?/framebuffer only?/I'm not even sure what to search for) where I keep the display and get to a command line. Any thoughts on what's happening when the screen goes blank or what I can do to get Linux working on here again?

View 4 Replies View Related

Ubuntu Multimedia :: How To Install Intex Tv Tuner Card

Feb 5, 2010

How do i install intex tv tuner card (PCI ver 2.1) on ubuntu 9.01 I have installed myth tv my problem is which card do i select i selected Analog card and MJPG as well but when i go to scan for channels says FAILED TO OPEN CARD.

View 1 Replies View Related

Ubuntu Multimedia :: How To Configure INTEX TV Tuner Card

Dec 24, 2010

I have INTEX TV tuner card. i'm trying to configure in ubuntu for tvtime. The card has the saa7130 or saa7134 philipse chipset.

lspci | grep -i saa713

output:

Code:

00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

after the installation, the card was detected and /dev/video0 was created but dmesg indicated that the card is not among the ones listed as supported and since card did not have EEPROM, the card was not up and running right away.i have edited /etc/modprobe.d/tvcard.conf and added options saa7134 card=3 tuner=14

Code:

$sudo nano /etc/modprobe.d/tvcard.conf

added:

Code:

options saa7134 card=3 tuner=14

Then CTRL+X to exit

still it did not work. tvtime would always say no signal and tvtime-scanner never picked up any channels. then i followed instruction given by rsramkee [URL]. edited saa7134-cards.c and deployed new kernel linux-2.6.36.2 with changes.i rebooted machine to windows selected one channel in tv tuner software of windows, again rebooted machine to ubuntu (i have dual boot windows XP and ubuntu 2.6.35.23). tvtime able display video of channel that is selected in windows OS (No sound), but not be able to tune any other stations.In mplayer able display video of channel that is selected in windows OS with sound.

command:

Code:

mplayer tv:// -tv driver=v4l2:chanlist=us-cable:alsa:adevice=hw.0,1:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:norm=PAL

i followed instruction given by http://linuxtv.org/wiki/index.php/Saa7134-alsa to set up sound. loading the loopback module with the command:

$ pactl load-module module-loopback

Now tvtime able display video of channel that is selected in windows OS with sound, but not be able to tune any other stations. Not be able to tune any stations.dmesg output:

Code:

[ 1320.568603] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 1320.568697] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffff800
[ 1320.568737] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 [card=2,insmod option]

[code]...

i'm not be able to tune any stations using tvtime and xawtv. if channel is not selected in windows OS for more then 1 hour then tvtime displays message no signal, same message in tvtime-scaner (No sound).

View 1 Replies View Related

Ubuntu Multimedia :: TV Tuner Card - Unable To Get Video

Mar 29, 2011

I have a Phillips SAA7130 TV Tunner card and seems to have installed correctly. I have Xaw TV program on Ubuntu 10.10. I am unable to get the Video. I tried 3 players and in none I am able to see the video. The source in all programs says 'Default' and am unable to choose the card as source. I am also ok to allow remote login to check.

View 7 Replies View Related

Ubuntu Multimedia :: Second Monitor Works Fine But Main Screen Messed Up

Mar 28, 2010

I have to hold a presentation using a projector in a few days and I have to bring my own laptop, so I tried hooking up a second monitor to test if it works. As it turns out, the second monitor works fine, but then my main screen is messed up. I'm using Ubuntu 9.04 and I'm doing this on a HP Pavilion DV4000 laptop. My main screen shows just the bottom (cca) 400 pixels of the wallpaper, no bottom panel, no desktop icons. And I'm kind of scared to remove the second monitor now cause I don't know what I'll do if I don't get the main screen back.. Well, other than installing 9.10 beta that is..

View 4 Replies View Related

Ubuntu Multimedia :: No Sound In 10.10 - Audio Works Fine In Win7 Boot

Nov 25, 2010

To start off, I am about 3 days into my new ubuntu operating system. I am a complete newbie, but i have picked up alot in the last couple days. My sound was previously working, but the microphone was glitching when using skype. After running a bunch of different commands in terminal that were posted on forums from all over the internet, I rebooted my computer to find no sound. I have searched the forums again and tried many different command lines in terminal to no avail. My system setup is found here: [URL]

View 7 Replies View Related

Ubuntu Multimedia :: Configure Generic Remote That Came With A TV Tuner Card

Jan 18, 2010

I've been trying to configure this generic remote that came with a TV tuner card (saa7134) a while ago but I haven't been able to do so. The thing is that the remote works, in fact some buttons are recognized properly... but some are not. I'm not using lirc!, from I have been reading there is support for generic remotes in the 2.6.31 kernel, besides, i can't configure lirc, it doesn't let me load the kernel modules to start up the daemon for the ir. is there a config file for the button mapping of the native remote support in kernel 2.6.31?. Been searching it but couldn't find it.

View 5 Replies View Related

Ubuntu Multimedia :: Tv Tuner Card: (Vivanco PCI EASY BG / DK) Not Working

Jul 27, 2010

I have an almost noname tv tuner card: Vivanco PCI EASY BG/DK. Lspci says it is Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01). Dmesg detected it as a LifeView FlyVIDEO3000. I tried to configure it making the file at /etc/modprobe.d with the options card=2 tuner=5 (I found that also in dmesg). Still TvTime can't find any channels. I also tried using xawtv and scantv, but only managed to find two channels using ntsc somehow, but I have PAL BG/DK. (the card itself works on Windows, but it took me a while to configure the channels properly)

View 4 Replies View Related

Ubuntu Multimedia :: WinTV Card Fails To Initialize Tuner

Sep 11, 2010

I'm running 10.04 64-bit with all stable and pre-release upgrades enabled in a Dell 4-core Inspiron with 8 GB of memory. I just bought a Hauppage WinTV-HVR 1600 and it's detected in the boot process and all firmware is loaded, but then it goes bonkers and spews

[ 24.421795] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
[ 24.612289] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 24.632510] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)

[code]....

over and over again. All the info on the Hauppage site and LinuxTV is very obsolete. MythTV initializes, but can't find any channels on either the analog or digital streams.

View 7 Replies View Related

Ubuntu Multimedia :: Tv Tuner Card Not Picking Up Digital Channels?

May 26, 2011

I have a tv tuner card thats a couple years old, well since they are phasing out the old analog cable channels with digital ones, my card is not picking them up anymore. Is there any way to get the digital ones without buying a new card?

View 2 Replies View Related

OpenSUSE Multimedia :: Installing The HVR-950Q TV Tuner Card?

Mar 13, 2010

Has anyone had any success with installing the HVR-950Q TV Tuner card? I am trying it after giving up on the hvr-1500c (15 months trying!).

View 9 Replies View Related

Ubuntu Multimedia :: Flash 10 Update Not Found By Firefox, Works Fine With Opera?

Mar 12, 2011

title says ist all: downloaded and installed the current FP-DEB from Adobe and installed it via GDebi.Result: Firefox (3.6.15) doesn't play any videos anymore (shows "need to upgrade...")But: the FP is installed properly, as seen by Opera using it just fine.Any ideas how to tell Firefox where to find it?I have found '/opt/firefox/plugins/flashplugin-alternative.so' and I have copied it as '/opt/firefox/plugins/libflashplayer.so' to no avail.

View 2 Replies View Related

Ubuntu Multimedia :: Flash Player With Firefox Which Works Fine In Non-full Screen Mode And NVIDIA

Jan 10, 2010

I have downloaded the recommended NVIDIA driver for my Quadro FX 1400 graphics card which has 256 MB RAM. I have my laptop in a docking station and from the docking station is a DVI to HDMI converter then HDMI cable to my TV (the idea is to use it as an internet TV slave! ). When I come to configuring the NVIDIA X Server, it correctly detects both my laptop screen and my TV via the HDMI connection. However, when I come to save the settings for the X server and go to restart it, it cannot save the configuration file. This is most annoying as it does not allow me to use the dualview I need.

The second problem comes when I use something like the BBC iplayer or anything that uses the flash player. I have the latest flash player with Firefox which works fine in non-full screen mode. However, when switching to full screen, the CPU load jumps to 100% and the playback is really jerky. Had this running the beloved windows XP before and could handle full screen no problems. I have seen a few posts here which show workarounds to zoom in on the small screen on Firefox but would prefer to run it in the full screen mode.

View 2 Replies View Related

Ubuntu Multimedia :: Avidemux-qt Has No Audio Output / But Works Fine Under Avidemux-gtk

Jun 22, 2011

under avidemux-qt, the videos play and encode w/out any audio output, and audiodevice is set to "dummy" and cannot be changed. but avidemux-gtk has no problem w/ audio playback.Is this an application specific problem, and if not how do i configure phonon to fix this issue?

View 1 Replies View Related

Ubuntu Multimedia :: Tuner Card Not Feeding Sound Through Onboard Sound?

Aug 9, 2011

I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.

Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.

View 2 Replies View Related

Hardware :: Indications About TV Tuner That Works With Fedora 12

Mar 31, 2010

I need a TV Tuner - external (not internal) who work with Fedora 12. I have cable tv also. I see on internet to many technical details about tv tuner. I'm asking you , because:
1.[URL] - not working
2. and I saw this :
"USB tuners are no good. Apparently USB doesn't have enough bandwidth to handle the video and audio, so the results are poor quality."-from [URL]
Any model which worked well with Fedora 12.

View 2 Replies View Related

Ubuntu Multimedia :: TV Card Works In Tvtime But Not In Other Programs

May 20, 2010

I get perfect picture with Tvtime, but can't watch /dev/video0 with any other programs, I've checked if some proccess use it, and it's not it.

I wan't to watch this with vlc, tv-viewer or other programs to record, but when it doesn't recognize anything!

View 9 Replies View Related

Ubuntu :: Everything Works Fine Until After Reboot?

Mar 30, 2011

Basically i set up a webserver using this tutorial but installed ubuntu 10.10 [URL]

im using charter cable and it has that ubee router. when i tried to set up the static ip the closest thing i saw was an option called static ip lease in which input my servers local address and mac address and checked enable. then i applied dmz to my servers local ip. after that i typed in my public ip and to my excitement it worked. so i began creating the website. i dont know if all that is relevant but just in case i didnt want to leave anything out. this is my first time with linux and servers and ive only been at it for about 5 days. anyways i made the website and everything was going good then i needed to reboot the server so i did. after reboot i logged into the server then went back to the other room where i worked on the server using putty from a pc and flashfxp and tried to navigate to the website in firefox. it didnt work. if i try to go to the website address from a computer on my network i get a problem loading page error from firefox and if im on a different network it shows my router page to login and configure. i dont understand how it was working then after reboot it all of a sudden doesnt.

o also i installed gnump3 today before reboot if that is important

View 1 Replies View Related

Ubuntu Multimedia :: Xserver No Longer Works After Removing Bad Graphics Card?

Apr 30, 2010

It all started Tuesday morning. I woke up and turned my computer on. Normally I just leave it on all the time, but I turned it off the previous night for some reason. When I turned it on, everything worked fine for about 10 minutes, until my monitor said "Monitor Working Out of Scan Range." I messed with the settings on the monitor to try and get it back, but to no avail. Restarting would make it work, but for even shorter periods. It eventually would display the manufacturer image (Everex), and then go dead again with the same message.

I thought it was the monitor at first, and got a new one. The new one is a wide screen 18.5 inch Dell IN1910N. The problem persisted, so I knew it wasn't this. I kinda figured it out when I started smelling something burning coming from my computer, and discovered it was the graphics card I installed awhile back. It is the pci ATI X1550, and its fan no longer worked.

So I figured, well, I will just remove it and go back to the onboard video. Doing this worked fine, until I got to the stage where it tried to boot to the Xserver, and then the computer just hangs. No sounds indicate I ever get to a logon screen or anything.

Now, I tried commands like sudo dpkg-configure xserver-xorg, and it asked me a lot of questions about my keyboard, but didn't fix my video. I also tried the "Xfix" option in recovery mode, and it purged all the old fglrx drivers, but that didn't help either.

I am currently using a live CD (I was doing straight command-line for awhile, after I also played hell getting the wireless working). I tried literally coping and pasting the entire contents of the X11 folder over, but that didn't work either (the xorg.conf files were the same anyway). I don't know what to do to get my old partition to boot X correctly.

All the commands I was copying before are not in my terminal now, and I'm not sure exactly what command-line information you need. I know that Openchrome is supposed to run the onboard VIA video, but I don't recall the command that tells me everything about it.

View 5 Replies View Related

Ubuntu Networking :: GRE 47 Not Received While It Works Fine On Xp?

Oct 5, 2010

This has been bugging me for quite a long time. I need to have a pptp connection to my university. I have tried to locate the error, but this has been a real trouble.

A little bit of history: My girlfriend had a laptop with M$ vista on it with a working PPTP connection. I had a laptop with Ubuntu, with which I couldn't get the PPTP working.

When my laptop crashed, I bought a new one on which I run a dual boot XP SP3 and Ubuntu. I also own a desktop (Dual M$ Win 7 / Ubuntu standard Karmic) and my girfriend also upgraded to Win 7.

Currently, the XP version is the only one on which I can get a connection. Both Ubuntu and the Win 7's give me a GRE proc 47 not received error. I know our router (a DAVOLINK DV2020) is notorious for not sending through GRE proc 47, but this either shouldn't be the case or it shouldn't matter, since I can make a perfect connection through the XP OS.

This is quite a handicap, since we both study at the university for which we require working VPN PPTP connections.

Settings:
Gateway: vpn-eur-pptp.eur.nl
Username: 123456ab@eur.nl
Password: password
Authentication: MSCHAP / MSCHAPv2

[Code].....

View 3 Replies View Related

OpenSUSE Wireless :: Network Works Fine On XP / Ubuntu / 11.1 But Not For 11.2

Mar 30, 2010

On my Acer netbook (AOA-150-1635) the wireless works fine with WinXP, Ubuntu, and used to work with Suse 11.1. I replaced the Suse 11.1 with a clean network install of Suse 11.2. I couldn't get the wireless to work and did another network install using the wireless. When the install was completed I could not get the wireless to work with Suse 11.2. When I run the "collectNWData.sh" it shows--

!!! CND0120E: Network card wlan0 has no IP address
wlan0 Interface doesn't support scanning : Network is down

[code].....

I looked up error CD0120E and changed the network devices setup to "traditional". The wireless "scan" picked up the routers and I added the encryption keys. Still no joy. I ran "collectNWData.sh" again and it said it is better to use the Network Manager.

!!! CND0180I: The system can't ping external IP address 195.135.220.3
!!! CND0150E: There might be a problem with the default gateway definition 10.1.1.1 on interface eth0

[code]....

Going back to Yast, Network Devices, I set Network Manager. The result is that it is back to the beginning with "collectNWData.sh" giving the original error.

View 9 Replies View Related

Ubuntu :: Compiz Works Fine In 9.04 / Doesn't Work In 9.10

Mar 18, 2010

I've got 9.04 and 9.10 both installed on the same machine. The /home directory is on a separate partition, so both OSes use the same /home.I can't get Compiz to work at all in 9.10, even though it's been perfectly fine in 9.04. Is there a backport of some sort that i should install?The fixes I've found all point to editing the xorg.conf file, but of course, Karmic doesn't have an xorg.conf file.I've tried reinstalling the Compiz files, reinstalled the open-source video drivers, installed/uninstalled fglrx drivers a few times, rebooted dozens of times.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved