I've just spent a few hours searching through net articles and postings regarding Samba, pyNeighborhood, etc., all of which seem to end up at "now make sure your Windows server is running."I don't have a Windows server.I have a desktop and a laptop, both running some flavor of Debian.All I want to do is share files. Nothing fancy.
View 1 RepliesRight, I would like to be able to share files with another member of my family over our home wireless network. I have ran the command avahi-browse -a but it on returns my computer.
View 1 Replies View RelatedI got my somewhat older desktop running ubuntu 9.10 and I'm loving it so far. However a while ago while I was slightly intoxicated I boasted to my roommates that sharing files with this thing should be super easy, since it's linux and all that. Since then I've been trying to set up the desktop as a streaming media server, with no success. I found a pretty good guide on how to get Samba up and running on instructables. My laptop is part of a school domain. Since many of my roommates go to the same university, theirs are also part of that domain.
For those of you who aren't too familiar with Windows (anymore), your computer can either be part of a workgroup or a domain. A workgroup is intended for home networks and makes it easier to share files, which is what I'm trying to do, and what the guide calls for. I've illustrated the problem in the attached image. As you can see both computers connect to the same router. I don't think I really have to explain, but I just figured I should try to be as clear as possible.
My question to you is: is there any way that I can set up the ubuntu desktop, or samba, so that it can share files over the wireless network at home with the computers that run windows and are part of the school domain? I'm guessing I should somehow be able to access the desktop from another computer on the same network if I give it proper access. I just have no idea how to do it or where to look, since almost everything I encounter calls for putting the windows machine in a home workgroup.
I have two desktop computers on the same home network and I am unable to share files between the two. Both have access to the network. One is able to file and printer share using SAMBA and a windows 7 laptop. The other machine is unable to either do file sharing via Samba or SSL file sharing between the two Ubuntu machines.
View 7 Replies View RelatedI have installed Ubuntu 10.4 LTS and I want to share a printer on that computer with my windows network (mix of XP and Vista). I have network connectivity and and can see other windows computers and they can see me, I am just stumped on how to share a printer on my linux machine with all of the Windows computers on my network.
View 4 Replies View RelatedI have 3 computers connected via an ethernet cable to the same ADSL modem. Each has its own internet address and what appears to be a local address (10.1.1.1, 10.1.1.2 etc).
I would like to enable file sharing between the three but I don't want one of them to be a gateway for the others and I don't want any information that the 3 computers share to go out on the net.
So far, the slack book and man pages imply that years of research are ahead of me and none mentions a "gateway free" configuration.
I've got wired connection on my ubuntu and I set up a wireless network so I can share internet with other computers. I added another computer to the network, but it's asking for:
* an IP address
* router address
* subnet mask.
Where can I find these values?
my main computer hostname is home, and the others are ubuntu and eduardo.In home, I try to configure samba, downloading it with "sudo apt-get install samba" and then downloading at the synaptic manager the samba-common-bin thing.I shared my folders as ROOT in home and I cannot access from ubuntu and eduardo.Then I googled and I found this site: Quote:URL]Well... I follow all steps and I can't access these files.What I need to do to share files between these computers???
View 9 Replies View RelatedIm using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies View RelatedI am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I am new to Fedora.
I'm looking for a program that I can use to sync files between two computers. I have a laptop that travels around with me and I want a simple way of transferring the new/changed files to the desktop computer. I'm looking for something that would be simple and quick (point & click) to transfer/backup:photosKDE PIM (emails, ontacts and calender)documentsmusic etc.
View 9 Replies View RelatedI want to transfer files (a music folder) between two Linux computers. After searching for the best way to do this, I've seen that there are lots of ways of doing this. I know this has been asked a lot, everywhere and all the time. The main problem with this is that there is no clear, recent consensus on one best way to do this task in 2011 for Linux beginners (even depending on some parameters).
So in the spirit of the Stack Exchange websites, I want this not to be related to my particular situation, but more of a guide to others as well on how to transfer files between two Linux computers over a local network. I think a wiki would be useful for many.
Here's what I found so far:
ssh
sshfs
scp
sftp
nfs
samba
giver
What is the easiest? Most flexible? Simplest? Best solution? What are the pros and cons of each? Are there other (better) options? What are the parameters in choosing the best method (solution might depend on number of files, filesize, easiness vs. flexibility, )?
I can't seem to figure out how to even share files between my laptop and desktop. They are both Ubuntu 9.10. I thought maybe samba was the way but couldn't figure it out. I was looking at the ssh that comes with Ubuntu and been trying to get it to work but don't know what I'm doing wrong. I type: ssh username@computername and it give me a little info. Don't know what I'm suppose to do then. I looked at the network folder on my laptop and it seem to see it but everytime I click on it ask for a password and I can't get in since I don't know the right password. I'm not sure if this is the best software to use or not. Just wanted something to look at and transfer from my desktop to my laptop and vice versa.
View 7 Replies View RelatedLooking for a app. to sync files on two different computers (Ubuntu and Windows XP) on home network. I don't want a internet storage app.
Unison looks good. Anyone familiar with it or other?
I had to leave rather suddenly (decision was Germany's, not fiancee's), and now am in the States again, but my files are still there. There are lots of things (mainly photos) on there, that I would like to have here. SOME stuff is on CD/DVD, but there is stuff that isn't.
Is there some way that I could access her computer and just copy files to mine?
(I picture two folders, one on hers, one on mine, and I just dragging an icon from one to the other - but I don't suppose anything's THAT easy...)
Naturally, her computer would have to be on, and I assume she could not be using it herself. Naturally also, I would get her permission first...
I assume that it would take a while, but if it were as simple as the icon thing I described above, then I could just go away and come back later. I assume something would be running to make sure that the destination file and source file were identical before proceeding to the next file.
[Before you suggest: why doesn't she just copy the files to DVD's and mail them to me? She is not all that computer saavy, I'm afraid, and trying to explain it all, including the exact folder names and such, Plus, how to use a DVD/CD burner and software... Plus translate it all into German... If I were rich enough, I could just go there and do what I needed, but that is not in the cards for the present. ]
IS there a way to copy stuff from her computer to mine?
I currently have two computers (one windows one linux) connected to each other via a crossover ethernet cable. Now, each computer can see each other and I can ping both ways. Also, I can ssh into the linux box from windows (putty, cygwin) as well as ssh into my windows machine from the linux box. Here's the problem: I can send files from my linux machine to my windows machine with no problems doing this:
scp this_file.txt windows_user@10.10.10.11:/cygdrive/c
however, I can't seem to send from windows (cygwin) to the linux machine. Here is what I see at cygwin x-term prompt:
$ scp that_file.txt jqweezy@10.10.10.10:/home/jqweezy
jqweezy@10.10.10.10's password:
Executing /etc/profile ...
Now, it seems like everything went fine. However when I look in /home/jqweezy that_file.txt is not there.
p.s. Don't know if this helps, but here is some extra info. Linux machine has only one NIC. Windows has two NICs, one NIC is setup for automatic network detection the other is setup for communication with linux machine via crossover cable (see above).
I have Ubuntu on one machine and open SUSE on the other. Both connected with an ethernet cable to the same router. Both connect to the internet ok. I did manage to set up 2 machines both running Ubuntu with file sharing but now I have switched one to SUSE I seem to be getting into a mess. Ubuntu sees the SUSE machine but does not open any folders. SUS does NOT see the Ubutu machine. I have looked for a beginners guide to setting up file shaing with SUSE without success. (I like SUSE better because I can use my Audiophile sound card "out of the box")
View 9 Replies View RelatedI have a Windows 7 Desktop and an Ubuntu Laptop connected with a KVM switch. I use the setup for software development, so I am constantly switching between the two, so I need a way to quickly transfer files between the two. I'm not sure if this is possible, but if I could connect them in a way where the OS of each mounts the hard drive of the other. Is there a way I could do this?
View 3 Replies View RelatedI have a music archive on several computers, from time to time do I add, remove or change the archive on one computer. To keep this changes will I have to copy the new version of the music archive to all the other computers.
is there a program that can sync the music files. Let say that I update the info in one music file, then will the sync program notice the newer version and replace the old file with the new files on all the other computers.
I guess I would need a dedicated server for this where all changes are stored with some kind of version number of the music archive. Since not having a server would make everything (I guess) much more complicated. All computers would have to communicate with each other to check for a new version instead of only communicate with one computer (the server).
I have 2 Ubuntu Computers on my home network. I haven't figured out the ways that I can connect these 2 computers to share files, remote desktop, etc. What are all my options?
View 5 Replies View RelatedNetworking Problem Fedora 14 2.6.35.12-90.fc14.i686. I am trying to share files between 2 Fedora 14 computers , a desktop and a laptop, both located on my local DSL server. The laptop sees its public files and the public files folder on the desktop computer - looks fine. The desktop computer acts differently. Both systems show an entry of "unknown type" in the directory listing, for the public files directory. But whereas a right click on the directory entry on the laptop offers "open" the same operation on the desktop computer offers "open gedit". When I double click the entries on the laptop, entries appear on the main screen. If I double click the entries on the main screen, the directory contents are displayed. But, if I doubleclick the directory entries on the desktop computer 1- I get a black box that says there has been a crash in gvfs-1.6.6-1.fc14 and an error message box tells me Dbus error org.freedesktop.DBus.ERROR.NoReply: Message did not received a reply.
View 1 Replies View Relatedhow to copy files over my network between my two computers.
I have done it before, but don't remember all the things I had to go through to do it.
None of the instructional things that I have found has given me actual instructions that I understand.
Actually I have not even found instructions for using scp that I can understand. I have all ready done this in the past, yet with 30 years experience with computers, a bachelors degree in computer science, 20 years experience with linux I still cannot understand anything that I have found that tells how to do this.
I have two problems.
(1) the actual syntax of scp. None of the instructions I have found tell what anything is in their examples.
They might say:
scp blah blah yadda yadda zonk zonk.
They don't bother to tell me what blah blah is or what yadda yadda is, or what zonk zonk is.
(2) Also none of them tells what has to be set up in configuration files for things to work. For example one of my computers is named KING, and one is named QUEEN. There is probably something on computer KING that tells what QUEEN is. I don't know what this configuration file is, so of course I can't put in the entries that would do the job.
So where are some instructions that I might find for doing this copy of files over my network of two computers?
I have two computers: one is connected with router by wi-fi and another is connected with router by lan. How I can optimal organize connection between two computers with Ubuntu 10.04 for transfer files? What Do I do? Can I share some folders,
View 3 Replies View RelatedTrying to find out how to share files between two computers on my Home Network.Tried VPN but not sure how to configure. I am using Linux Mint 9.
View 3 Replies View Relatediam trying to scp files between two remote computers, i get the following error:
Host key verification failed.
lost connection
What i am trying to do is : scp u1@ip1:/source_path u2@op2:/destination_path
I am able to ssh into both machines fine, so i know that works. I tried google for this but couldn't make much of the results.
I'm looking for a way to sync directories between two computers, in a "two-way" fashion. Basically, I have a laptop and I have a desktop, and I want to keep a particular directory synced between the two machines. The easiest thing would be to have some kind of networked filesystem, but obviously this won't work because the laptop may or may not be connected to the internet at any moment. At any time I might be editing files on the desktop or on the laptop, and when the laptop is connected to the internet, I'd like all files on both machines to be synced to their most recent versions.
I thought I could do this with rsync but now that I've looked into a bit more it seems like it works only for "one-way" syncing. In other words files are synced from a server to a client or vice versa, but not both at once. First of all, am I right about that? And second, is there a program that will do what I want to do? OK, I guess you could do it with some SVN kind of thing but that seems like overkill. I guess if there's nothing out there it shouldn't be too hard to write a script myself to do it.
im trying to connect two computers on lan.One computer has: VMWare Workstation and has Opensuse 11.3 mounted in it.The other computer has: VMWare Player and has Opensuse 11.3 mounted in it.Both computers are connected to a switch with cables.I have followed this guide in both computers:Depanati singuri calculatorul!: Opensuse 11.3 - configure local networkin order to setup a network.In one computer, if i go to: Computer---Network---Network folder, i only see one machine. When in fact i could see both of them right
View 9 Replies View RelatedI want to be able to synchronise files between 2 remote computers in both directions. Say for example that I want to synchronize my /home/Documents directory with <username>@example.com:/home/Documents What's the easiest way to update the folders in both directions, so that new/updated files on my home computer get transferred to the remote computer, and new/updated files on the remote computer get transferred to my home computer?
View 2 Replies View RelatedI now have 3 desktop computers hard wired into my wireless router and another desktop plus 2 laptops connecting wireless. All are running Ubuntu 10.4 or 10.10. I have not had the chance to get them all upgraded yet. What is the easiest way to get these computers connected so that they can share files? Do I have to set up a server or is there a simpler way? I just want to be able to copy a file from one computer to another.
View 9 Replies View RelatedShould I be able to transfer files between computers wired to the same router? Is the router bridging function used to transfer data between wired computers? I just got DSL and I'm new to networking. I have openSuse 11.4 on two computers plugged into a Belkin router. The internet connection to my ISP works from either computer. If I ping $HOSTNAME from either computer, the hostnames are different, but the IP address is the same which is that of my ISP. I only have the one router, but it has a bridging option. I don't know if it can do both bridging and routing simultaneously.
View 9 Replies View Related