I've got wired connection on my ubuntu and I set up a wireless network so I can share internet with other computers. I added another computer to the network, but it's asking for:
* an IP address
* router address
* subnet mask.
Where can I find these values?
I got my somewhat older desktop running ubuntu 9.10 and I'm loving it so far. However a while ago while I was slightly intoxicated I boasted to my roommates that sharing files with this thing should be super easy, since it's linux and all that. Since then I've been trying to set up the desktop as a streaming media server, with no success. I found a pretty good guide on how to get Samba up and running on instructables. My laptop is part of a school domain. Since many of my roommates go to the same university, theirs are also part of that domain.
For those of you who aren't too familiar with Windows (anymore), your computer can either be part of a workgroup or a domain. A workgroup is intended for home networks and makes it easier to share files, which is what I'm trying to do, and what the guide calls for. I've illustrated the problem in the attached image. As you can see both computers connect to the same router. I don't think I really have to explain, but I just figured I should try to be as clear as possible.
My question to you is: is there any way that I can set up the ubuntu desktop, or samba, so that it can share files over the wireless network at home with the computers that run windows and are part of the school domain? I'm guessing I should somehow be able to access the desktop from another computer on the same network if I give it proper access. I just have no idea how to do it or where to look, since almost everything I encounter calls for putting the windows machine in a home workgroup.
I need to share internet from my dsl connection to laptop (who is using windows) through my wireless usb d-link gwl-122. How to do that?
View 1 Replies View RelatedMay I ask if I can share my mobile broadband connection via Wifi?
View 2 Replies View RelatedI have fedora12 installed on my old laptop. I would like to use it as a wireless router so that I can use my new laptop without wires. The old laptop will be wired connected to the internet. I have already tried creating a wireless ad-hoc connection with the Network Manager and I manage to connect to the internet with my new laptop but only if I don't use any protection. If I want that connection to use WPA or WEP-128 it doesn't work!
View 10 Replies View RelatedFor the last 3 or so hours I have been trying in vain to simply give my mobile phone wifi internet access from my netbook. I have tried to google and follow some howto's and guides, but they're either too old or don't explain it very well. I'm fairly new to use of Linux and of wireless networks, but can handle setting them up in Windows. So basically, having said that, I believe I mostly understand how this whole thing is supposed to work theoretically but I just feel as though I lack the experience to jump the wireless hurdle AND the Linux hurdle at the same time. I have provided some information below.
- Setup is based on Lucid netbook remix install with a Maverick kernel update due to lack of driver support for wireless NIC - I can confirm wireless does work properly for connection purposes
- I followed [URL] and kind of followed [URL however I couldn't even tell how to run Network Manager, even though Synaptic tells me it is installed
- When I ran into problems trying to install ipmasq I found [URL] and followed what the response told me to which allowed me to restart the dnsmasq and the dhcp3-server at least
- I have restarted the entire netbook several times throughout the process.
I am looking for information on how to set up my laptop (running ubuntu 10.04) as a wireless access point for other wireless computers, through a mobile broadband usb device. My reason for wanting to do this: i have a mobile broadband verizon usb device for connecting to the internet when a regular wifi connection is not available. however, my wife does not, and it would be nice if she could use her wifi to connect to my laptop wifi and subsequently share my mobile broadband connection. Independently, I have no problems with wireless connectivity using wifi or mobile broadband, I am simply unable to figure out how to configure the two to work together in such a way as to create a wireless access point via my laptop.
View 3 Replies View RelatedI am trying to establish an adhoc connection in my ubuntu 10.10 and share my cable internet throughout this connection with my Android phone. I have read some guides but I couldn't be successful. (I have another windows mobile, and it couldn't connect too). I have installed Firestarter in order to enable internet sharing. My main Problem is that, no one can obtain IP adress from the adhoc connection, whether Firestarter is active or not. What should I do in order to make the other devices gain IP address from this connection. If I have to set static IP what should I do exactly?
View 9 Replies View RelatedI have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies View RelatedI have two desktop computers on the same home network and I am unable to share files between the two. Both have access to the network. One is able to file and printer share using SAMBA and a windows 7 laptop. The other machine is unable to either do file sharing via Samba or SSL file sharing between the two Ubuntu machines.
View 7 Replies View RelatedRight, I would like to be able to share files with another member of my family over our home wireless network. I have ran the command avahi-browse -a but it on returns my computer.
View 1 Replies View Relatedmy main computer hostname is home, and the others are ubuntu and eduardo.In home, I try to configure samba, downloading it with "sudo apt-get install samba" and then downloading at the synaptic manager the samba-common-bin thing.I shared my folders as ROOT in home and I cannot access from ubuntu and eduardo.Then I googled and I found this site: Quote:URL]Well... I follow all steps and I can't access these files.What I need to do to share files between these computers???
View 9 Replies View RelatedI would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
I did search, but could not find a solution.Right I've installed Ubuntu Server 10.10 on an old machine, installed fine and the system is running. I have a windows 7 desktop that is connected to the internet via wireless. The desktop then has an ethernet connection which is shared to the ubuntu server. The network looks like this.
Modem > Router > Desktop > Switch > Ubuntu Server My problem here is that there appears to be no connection from the server to the desktop. The server cannot connect to the internet.
When i ifconfig the ubuntu machine shows.eth0 link encap:Ethernetinet address: 192.168.137.2 Bcast:192.168.137.255 Mask 255.255.255.0 However on the windows desktop (the machine sharing the internet) these are the details for the connection to ubuntu server.ip 169.254.170.50 mask 255.255.255.0
is this a dhcp problem? is my server configured wrong?
i have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies View RelatedI have internet on my ubuntu machine (eth0) I am sharing with (eth1) My windows computers are getting IP addresses via DHCP from the Ubuntu Machine, and I can see (and use) samba/windows shares on all computers. Internet connection is not working on any of the windows computers.
I have eth1 set to "shared to other computers" under the IPv4 settings
Trying to share my internet connection with other computers on my LAN. I've tried doing this with Debian, Ubuntu & Fedora so far...
My Intended Setup is as follows;
The Problem: So far I've not been able to get an internet connection from any computer connected to the HUB. I currenty have Fedora 13 on PC1 but have also tried with both Ubuntu 10.04 & Debian Lenny. I am open to using any Linux based distro on PC1 as long it has a Gnome Desktop. eth0 on PC1 can be Static or Dhcp, but I would prefer to set Static IPs on eth1 & all of the Client PCs
To the best of my knowledge I have enabled ipv4 forwarding in sysctl.conf (& some other changes);
Code:
All changes I made to the Firewall (all other Firewall settings are still at default, no custom rules added yet);
Router is set up to assign dhcp from 192.168.xxx.100 & 192.168.xxx.200
At the moment I have only 1 PC attached to the HUB. It's Ubuntu 10.04 (PC2)
It's details are;
ip 192.168.xxx.103
netmask255.255.255.0
gateway 192.168.xxx.101
Thus Far I can't ping 192.168.XXX.103 from PC1 & I can't ping 192.168.XXX.101 from PC2. (unreachable) I have an internet connection on PC1 (of course)
I have done the ICS in my ubuntu 10.10 according to this article using eth0 connecting to wan router and eth1 connecting to the lan switch. Everything works fine.I have an open vpn connection which have full tunneling through the server. I want the vpn connection to be shared on the lan, and every internet connection will go through the vpn server. If I change the eth0 to tunnel adapter in iptables forwarding rule, will it work?
View 2 Replies View RelatedI am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
I want to use the wifi card in my laptop to share my internet connection to my Android Phone.Android phones don't support Ad-hoc networks yet (maybe not ever) so I need to the shared network in Infrastructure mode not ad-hoc mode.Using Ubuntu 10.04, If I click on the NetworkManager Applet ( 0.8 ) and select Create new wireless network, it will create an ad-hoc network, I then tried changing this to infrastructure, but it didn't work.Is there some way of modifying this created network to make it appear as infrastructure, or alternatively create a shared internet connection in infrastructure mode?
View 2 Replies View Relatedubuntu recognizes the router im using that goes to my ps3 but for some reason i cant link the router to my internet connection.
View 1 Replies View RelatedA friend of mine is trying to setup internet connection sharing in Ubuntu, which is something I've never dealt with before. Here's the situation:One desktop PC is dual-booting Ubuntu and Vista. This box is connected wirelessly to the router and can access the internet just fine. The desired setup is to have an xbox360 connected (wired) to the desktop PC, allowing it to share the internet connection.
1) A crossover cable would need to be used between the desktop PC and the xbox.
2) The xbox would still have the router's internal IP as the default gateway (I have zero experience configuring networking on an xbox... I hope these options are easily available).
3) The internal IPs can all be on the same network (i.e. router = 192.168.1.1 ; desktop = 192.168.1.100 ; xbox = 192.168.1.101)
4) IP forwarding would need to be enabled on the Ubuntu host
Is there anything I'm overlooking or just oversimplifying, or should that just about do it?
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
At my home I am using firestarter to connect my XBOX 360 to the internet and it works perfectly, never crashes etc and I get a moderate NAT which I've never experienced any problems in having.
I have my devices set up like this
eth0 - ifconfig eth0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255
XBOX - 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.255 gateway 192.168.2.1
This configuration works perfectly on my router at my house which has the IP of 192.168.0.1
However at my friends house he has a router with the IP adress of 192.168.2.10 or 192.168.2.7*, I don't remember exactly but I'll find out tonight. I have tried changing my IP settings on my xbox and eth0 to no avail. I noticed instantly that the XBOX IP is the same as my friends router. what the new settings would be, or simply changing the router's IP.
However there is also an issue with the DNS servers. I can't find them anywhere on the router or on the router box itself. I heard that I could point it towards my default gateway however.
How to share internet between two ubuntu PCs via bluetooth?
I have a Desktop and a Laptop. Their Configuration is as below:
Desktop:
Laptop:
Internet Connection: I want to use my desktop internet connection via blutetooth for this computer.
So the question is that how to share internet connection between these two Ubuntu computers via Bluetooth?
Remember that:
I've seem that HOWTO about connecting ubuntu PC to internet via mobile phone. I don't mean that!
i have an evdo connection with which i connect to the internet. i have been trying to share this connection for quite a few days from my lucid machine to a windows 7 pc but have failed. i have tried dhcp3-server, firestarter, network manager's built in capabilities but have failed! today i manually configured da windows 7 pc to an ip address within da range which network manager ws assigning when 'shared to other computers' ws selected and it worked! Now da question is how do i do it automatically? dhcp3-server never starts, it always fails with the error 'not configured to listen' or sumthng like it! Plus i want the wireless of my laptop to make an ad hoc connection to my mobile fone, which is also no possible...i think its some problem with da dhcp server.
View 1 Replies View Relatedi'm totally new to Linux and Ubuntu. I own a huawei 3g modem through which I connect to the internet. I plan to share the internet from that connection between my Vista pc and another pc running Ubuntu Lucid Lynx. The computer I plan to use to share the internet, let me call it Server, is equalling running Ubuntu Lucid Lynx. My Server perfectly recognises my modem and connects to the internet using it and I can browse.
I plan to connect the routers internet port to my Server using my servers network card. Then i intend to let the router do the sharing of the internet to the other computers on its own. I don't have any idea how to go about doing this. Originally, I tried a direct connection between my Server and the other pc running Lucid Lynx without bothering with the router and using the following settings which i found on an online tutorial:
Server ip 192.168.0.1
netmask 255.255.255.0
and no gateway
then on the client
client ip 192.168.0.5
netmask 255.255.255.0
gateway 192.168.0.1
I used open DNS servers for the DNS
However, i was unable to browse the internet from the client even though a connection between the two was established. Then I thought to myself, why go through this trouble, I have a router so why not go ahead and use it. But then I do not know how to do that. Using the router will enable me to effortlessly connect all my computers irrespective of operating system and ease the network creation process.
I'm trying to share the internet connection of my Windows XP Virtual Machine (virtualbox) to Ubuntu. I know it sounds weird, but what happens is that i'm using a 3G modem to connect to the internet and 3G connections are still very unstable with ubuntu's network manager. Fortunately, the modem works a lot better with my Virtual Machine. I have already set up a "host only" network between my Windows XP guest and my Ubuntu host and i can they can ping each other but i still can't share the connection of my virtual machine. I already selected "share this connection" on win xp but i think i still have to configure something on ubuntu for it to work. The interface Ubuntu uses is vboxnet0 (not eth0).
This is the last thing to do before i can get rid of my Windows XP partition
i have searched and searched for an answer but nothing i've found has worked for me what i have is an old computer with 2 network cards in it the 1 conected to the internet is eth1 one connected to the xbox via crossover cable is eth2, what i'm trying to do is share the internet connection to the xbox using ubuntu,i've tryed alreadyusing the network manager,using firestarter,ip tables,even nat,and all have failedi've been using ubuntu for 4yrs now, and i have always before been able to find answers to my problems by simply googling the answer. but this is one i can't seem to find an answer on.
View 3 Replies View Related