Ubuntu Networking :: Easiest Way To Get Computers Connected To Share Files?
Oct 24, 2010
I now have 3 desktop computers hard wired into my wireless router and another desktop plus 2 laptops connecting wireless. All are running Ubuntu 10.4 or 10.10. I have not had the chance to get them all upgraded yet. What is the easiest way to get these computers connected so that they can share files? Do I have to set up a server or is there a simpler way? I just want to be able to copy a file from one computer to another.
View 9 Replies
ADVERTISEMENT
Nov 20, 2010
I am having a heck of a time trying to find directions on networking my two computers together in order to share files. I have two machines running Ubuntu 10.10 Desktop & Netbook remix.
They are both connected to my wireless router to connect to the internet.
View 9 Replies
View Related
Nov 1, 2010
I have a Windows 7 Desktop and an Ubuntu Laptop connected with a KVM switch. I use the setup for software development, so I am constantly switching between the two, so I need a way to quickly transfer files between the two. I'm not sure if this is possible, but if I could connect them in a way where the OS of each mounts the hard drive of the other. Is there a way I could do this?
View 3 Replies
View Related
May 5, 2010
I am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I am new to Fedora.
View 4 Replies
View Related
Feb 19, 2010
I can't seem to figure out how to even share files between my laptop and desktop. They are both Ubuntu 9.10. I thought maybe samba was the way but couldn't figure it out. I was looking at the ssh that comes with Ubuntu and been trying to get it to work but don't know what I'm doing wrong. I type: ssh username@computername and it give me a little info. Don't know what I'm suppose to do then. I looked at the network folder on my laptop and it seem to see it but everytime I click on it ask for a password and I can't get in since I don't know the right password. I'm not sure if this is the best software to use or not. Just wanted something to look at and transfer from my desktop to my laptop and vice versa.
View 7 Replies
View Related
Aug 26, 2010
I have 2 Ubuntu Computers on my home network. I haven't figured out the ways that I can connect these 2 computers to share files, remote desktop, etc. What are all my options?
View 5 Replies
View Related
Mar 2, 2011
I need to install ubuntu 10.10 into 30 computers (using windows XP). I don't want to take each computer, format it and install the new operation system.(That's going to take too much time). Some documentations about the way that I can accelerate this process.
View 5 Replies
View Related
Jan 31, 2011
im trying to connect two computers on lan.One computer has: VMWare Workstation and has Opensuse 11.3 mounted in it.The other computer has: VMWare Player and has Opensuse 11.3 mounted in it.Both computers are connected to a switch with cables.I have followed this guide in both computers:Depanati singuri calculatorul!: Opensuse 11.3 - configure local networkin order to setup a network.In one computer, if i go to: Computer---Network---Network folder, i only see one machine. When in fact i could see both of them right
View 9 Replies
View Related
Jul 2, 2010
I have Ubuntu on one machine and open SUSE on the other. Both connected with an ethernet cable to the same router. Both connect to the internet ok. I did manage to set up 2 machines both running Ubuntu with file sharing but now I have switched one to SUSE I seem to be getting into a mess. Ubuntu sees the SUSE machine but does not open any folders. SUS does NOT see the Ubutu machine. I have looked for a beginners guide to setting up file shaing with SUSE without success. (I like SUSE better because I can use my Audiophile sound card "out of the box")
View 9 Replies
View Related
May 8, 2011
Networking Problem Fedora 14 2.6.35.12-90.fc14.i686. I am trying to share files between 2 Fedora 14 computers , a desktop and a laptop, both located on my local DSL server. The laptop sees its public files and the public files folder on the desktop computer - looks fine. The desktop computer acts differently. Both systems show an entry of "unknown type" in the directory listing, for the public files directory. But whereas a right click on the directory entry on the laptop offers "open" the same operation on the desktop computer offers "open gedit". When I double click the entries on the laptop, entries appear on the main screen. If I double click the entries on the main screen, the directory contents are displayed. But, if I doubleclick the directory entries on the desktop computer 1- I get a black box that says there has been a crash in gvfs-1.6.6-1.fc14 and an error message box tells me Dbus error org.freedesktop.DBus.ERROR.NoReply: Message did not received a reply.
View 1 Replies
View Related
Oct 2, 2010
Trying to find out how to share files between two computers on my Home Network.Tried VPN but not sure how to configure. I am using Linux Mint 9.
View 3 Replies
View Related
Feb 1, 2011
i have recently had a house mate move in and he is using my wireless network, even though i asked him not to give out the network key to his friends either he has or they have hacked my network and are using it when they come over, is there a program i can use to monitor the number of computers that are connected to my network and block them, or is there a way i can just wee what is going on. They seem to just connect and i don't want to have to change the password particularly because that involves changing it on multiple devices.
View 1 Replies
View Related
May 8, 2011
I have two Ubuntu 10.10 computers and two Windows XP computers connected to my network. I cannot share files between the Ubuntu computers using samba. I keep getting the "Unable to Mount Location Failed to mount Windows share" error. I've tried the solutions posted by dmizer here and nothing works.Random true facts:I can successfully connect to folders shared on my Windows XP computers from either windows computer.I can successfully connect to folders shared on my Windows XP computers from either ubuntu computers.Neither of my windows computers cannot connect to folders shared on either ubuntu computer.Neither ubuntu computer can connect to folders shared by the other ubuntu computer.I REALLY need to get samba to work since I have other Windows computers on my network.
View 8 Replies
View Related
May 30, 2010
i have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies
View Related
Jun 8, 2010
if i have Fedora 13 installed on a desktop and on a laptop, can i organize so that both machines use the same dsl connection? I have an external DSL modem that is currently connected to my PC via an ethernet cable. When I want to use my my laptop I usually unplug the dsl connection from my computer and plug it into my lap top. is there some way i can have it connected to both?
View 9 Replies
View Related
Jul 14, 2010
I have a usb 1tb drive that I want to share over my netowork, but when i share it through nautilus, it doesn't mount right on other computers, ect. Is there a way to mount it. The location of the drive is /media/FreeAgent Drive___
View 3 Replies
View Related
Jan 29, 2010
As the Subject mentions I have an Office Jet 5610 All in One Printer that I am trying to share between 3 Computers.
Computer Number 1: Laptop running Fedora 12 with the Gnome desktop. This is the computer to which the printer is physically connected to. I have no issues printing from this printer at the laptop. I have installed both samba and cups. I can access cups online and manage the printer from the Laptop with no issues I have checked to make sure sharing was turned on and in the laptop i have made sure that internet sharing with the printer is turned on.
Computer Number 2: Desktop running Sabayon 5.1 with the Gnome desktop. I can see the printer and it tells me that its ready. I try to print a simple test page and i get error: Destination Printer not accepting Jobs. I'm not sure if this is a Sabayon issue a Cups issue or a Fedora Issue.
Computer Number 3 Desktop running that Redmond Crap (Wifes Computer) Yeah Redmond wont even find the network printer much less print to it.
I forgot to mention that i have checked my firewall to make sure IPP was allowed and Samba was allowed so i do know that these are not the issues. I do have SELInux installed and running though don't know if this could be the culprit or not.
View 2 Replies
View Related
May 28, 2010
Trying to share my internet connection with other computers on my LAN. I've tried doing this with Debian, Ubuntu & Fedora so far...
My Intended Setup is as follows;
The Problem: So far I've not been able to get an internet connection from any computer connected to the HUB. I currenty have Fedora 13 on PC1 but have also tried with both Ubuntu 10.04 & Debian Lenny. I am open to using any Linux based distro on PC1 as long it has a Gnome Desktop. eth0 on PC1 can be Static or Dhcp, but I would prefer to set Static IPs on eth1 & all of the Client PCs
To the best of my knowledge I have enabled ipv4 forwarding in sysctl.conf (& some other changes);
Code:
All changes I made to the Firewall (all other Firewall settings are still at default, no custom rules added yet);
Router is set up to assign dhcp from 192.168.xxx.100 & 192.168.xxx.200
At the moment I have only 1 PC attached to the HUB. It's Ubuntu 10.04 (PC2)
It's details are;
ip 192.168.xxx.103
netmask255.255.255.0
gateway 192.168.xxx.101
Thus Far I can't ping 192.168.XXX.103 from PC1 & I can't ping 192.168.XXX.101 from PC2. (unreachable) I have an internet connection on PC1 (of course)
View 1 Replies
View Related
May 25, 2010
I have a LAN of about 70 computers that I would like to share media files between. I have gotten to the point with Samba that I can view the files without a username/password from client PC's. I would like to make all the folders read only except for one which will be writable for everyone. The thing that I am having a hard time with is allowing a couple of administrators (on Windows 7 machines) read/write access for all files/folders. I am completely new to Ubuntu and Samba so please make explanations thorough. Here is /etc/samba/smb.conf file:
[Code]...
View 3 Replies
View Related
Jan 8, 2011
I am at a university where my bandwidth is severely capped. I can start several other computers near me and download at the limited speed simultaneously. Is there any way for me to share the download between the computers to get the cumulative speed?
View 1 Replies
View Related
Aug 14, 2010
Right, I would like to be able to share files with another member of my family over our home wireless network. I have ran the command avahi-browse -a but it on returns my computer.
View 1 Replies
View Related
Feb 13, 2009
I currently have two computers (one windows one linux) connected to each other via a crossover ethernet cable. Now, each computer can see each other and I can ping both ways. Also, I can ssh into the linux box from windows (putty, cygwin) as well as ssh into my windows machine from the linux box. Here's the problem: I can send files from my linux machine to my windows machine with no problems doing this:
scp this_file.txt windows_user@10.10.10.11:/cygdrive/c
however, I can't seem to send from windows (cygwin) to the linux machine. Here is what I see at cygwin x-term prompt:
$ scp that_file.txt jqweezy@10.10.10.10:/home/jqweezy
jqweezy@10.10.10.10's password:
Executing /etc/profile ...
Now, it seems like everything went fine. However when I look in /home/jqweezy that_file.txt is not there.
p.s. Don't know if this helps, but here is some extra info. Linux machine has only one NIC. Windows has two NICs, one NIC is setup for automatic network detection the other is setup for communication with linux machine via crossover cable (see above).
View 2 Replies
View Related
Mar 11, 2010
I got my somewhat older desktop running ubuntu 9.10 and I'm loving it so far. However a while ago while I was slightly intoxicated I boasted to my roommates that sharing files with this thing should be super easy, since it's linux and all that. Since then I've been trying to set up the desktop as a streaming media server, with no success. I found a pretty good guide on how to get Samba up and running on instructables. My laptop is part of a school domain. Since many of my roommates go to the same university, theirs are also part of that domain.
For those of you who aren't too familiar with Windows (anymore), your computer can either be part of a workgroup or a domain. A workgroup is intended for home networks and makes it easier to share files, which is what I'm trying to do, and what the guide calls for. I've illustrated the problem in the attached image. As you can see both computers connect to the same router. I don't think I really have to explain, but I just figured I should try to be as clear as possible.
My question to you is: is there any way that I can set up the ubuntu desktop, or samba, so that it can share files over the wireless network at home with the computers that run windows and are part of the school domain? I'm guessing I should somehow be able to access the desktop from another computer on the same network if I give it proper access. I just have no idea how to do it or where to look, since almost everything I encounter calls for putting the windows machine in a home workgroup.
View 9 Replies
View Related
Oct 10, 2010
With Windows XP, I just right clicked a folder/directory and pressed FIND then I could search for whatever file/folder name i wanted to. I could even do custom searches based on the size, modification date etc.How do you do this on Ubuntu? There doesnt seem to be a way to easily do it like this. So far i found PLACES -> SEARCH FOR FILES but that means I have to go into the directory i want. Where as I would much rather be browsing through directories and THEN want to quickly search in a particular folder. The SEARCH FOR FILES method in PLACES just wastes more time.
View 3 Replies
View Related
May 22, 2010
Alright so i just wanted to try and get remote desktop connections running so i can access files on the other computers in my house. For my first try i went after my laptop. I'm using rdesktop.
First couple times i tried i typed in
Code:
After about 15 seconds it would pop back with
Code:
I realized that my laptop's firewall was blocking the packets, so i created a custom rule that allows all TCP packets on port 3389. So i fired up rdesktop again. Now it pops back with:
Code:
But instantaneously, not after 15 seconds (not sure if thats significant or not.) I checked my firewall's log and it allowed the tcp packets.
View 6 Replies
View Related
Feb 14, 2010
Im trying to set up a share between my 2 ubuntu computers. I set one computer to share a folder in the properties tab, and installed the corresponding software. now, how do I search my local network for shares?hat type of share is it? NFS? Is there a tutorial out there some place?
View 1 Replies
View Related
Feb 10, 2011
I would like to determine what computers are currently connected to my access point/router via the command line in Linux.
View 2 Replies
View Related
Mar 31, 2010
I am trying to setup vpn to access folders and files from my school. VPN is connected now through networkmanager, but I don't know how to actually gain access to the folders on the school server.
Is it through nautilus? Or the "Connect to Server"? The school provides addresses that begins with \.. something, and I have tried typing it in to nautilus and the "Connect to Server" but it fails to connect.
I have googled this but all I find is how to connect to vpn manually or through networkmanager, and not how I then can access the folders on the server.
View 4 Replies
View Related
Jan 18, 2010
I have like over 60 gb of tons and tons of tiny tiny files.
I used
Code:
rm -rf *
and I ended with system load of over 100+.
Any idea how do I mass remove the files without crashing the system? I have Q9550 with 8 gb ram.
View 3 Replies
View Related
Mar 11, 2010
I would like 2 computers (same network) to use the same SQL database. How should I start?
View 2 Replies
View Related
