OpenSUSE :: Why A Part Of The Ram Is Missing

Mar 10, 2011

I work on opensuse 11.2 on my core 2 quad. Although I have 8GiB ram, in the system monitor I see 3.5GiB. I really need 8GiB ram, why a part of the ram is missing?

View 4 Replies


Ubuntu :: Why Folders Top Part Is Missing Sometimes?

Jun 20, 2011

I'm using UBUNTU 11.04. Sometimes when I open a folder or resizing it, the top part of the folder(which contains minimize, maximize buttons) is missing. That time can't move the folder also. Why is that and how to fix it?

View 3 Replies View Related

Ubuntu :: Download Only The Missing Part Of The File?

Aug 14, 2011

I downloaded a .gz file. The network was disconnected a few times during downloading. I resumed the download each time with wget -c option. However after all the downloading is over, an error occurs when I try to extract the .gz file. Is there any way I can download only the missing part of the file?

View 1 Replies View Related

Ubuntu Installation :: After Dd From Full 15GB Part To 1.3TB Part, Shows Same Free Space?

Dec 8, 2010

I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?

View 1 Replies View Related

Server :: How To Access Local Part / Domain Part Of Email Address In Postfix's

May 24, 2010

I'm trying to figure out how to access the local part and the domain part of an email address in postfix's For example, has myname as the local part and as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.

View 2 Replies View Related

Software :: Server Hosting Different Part Of Web Site Must Appear As Part Of Domain

Jul 13, 2009

we have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.

View 6 Replies View Related

Hardware :: Is CMOSRAM Is Part On Mother Board Or Part Of RAM?

Jan 14, 2010

In bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.

View 4 Replies View Related

OpenSUSE :: Deleted Part Of My System

Feb 24, 2010

I was trying to delete a printer software package and some how managed to do away with part of my system.Guess I clicked on something I shouldn't have.Before I realized what was going on about a page of deleting this and that zipped by before I aborted.Is there a way of finding out what was deleted so I can put it back together?The stuff in my home folder is still intact, so if I have to do a new install it's no biggy.Just hoping I wouldn't have to.Had to reinstall dolphin just to see that the home folder was still there and intact.

View 6 Replies View Related

OpenSUSE :: Evolution-Part Of Screen Cut Off?

Apr 22, 2010

I have Evolution contact manager, works well but I cant seem to see the bottom of the screen, its cut off. Is there a way to change the screen size (particularly the Contact/Editor/Personal Information as I want to access the "notes" part of the application"
Opensuse Gnome 11.1 on Lenovo S10e Netbook!

View 4 Replies View Related

OpenSUSE :: How To Roll Back Part Of An Update

Sep 25, 2010

opensuse v11.3
linux x86_64

The most recent update that produced the kernel version above is bit of a disaster for me. The open source radeon driver does not work with VirtualBox (it crashes at startup), and the ATI fglrx driver either builds without acceleration (or the X server loads it that way?) or fails to build.

Is there a way to undo some (or all, if necessary) of the update?

View 9 Replies View Related

OpenSUSE :: Part Of Desktop Not Responding To Clicks?

Aug 14, 2011

I'm using the latest version of SUSE with GNOME 2.32.1. My problem is that a portion of the upper left area of my desktop does not respond to the mouse. That is: if any given application is running and I click on this area of the desktop, it doesn't respond to the clicks. I first realized this using tabs in firefox, then I noticed I couldn't open menus, but I could use the search bar to the right. I attach a link with the image, showing a red rectangle marking the roughly the area I cannot click.

View 1 Replies View Related

OpenSUSE :: Making User A Part Of The Power Group?

Apr 4, 2011

Ever since the 11.4 update I have to enter my root password in order to shutdown the computer, I think this is because I'm not a part of the "power" group. I remember something similar in 11.2 but I never got around to fixing it.Is there a way to join the "power" group?? I don't see it on the user and groups management section in yast.

View 6 Replies View Related

OpenSUSE Install :: New Kernel As Part Of Auto Update?

Jan 20, 2010

the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?

View 6 Replies View Related

OpenSUSE :: Pop-up For Network Manager Hangs / Will Not Go Away Covering Part Of Screen

Jul 20, 2010

I am having an issue that the pop-up for Network Manager hangs and will not go away covering part of my screen. This started after the system locked-up. If I try to edit the pop-up setting in gnome it the dialog box lockup and has to be forced shutdown.I am runnning openSUSE 11.3.

View 4 Replies View Related

OpenSUSE Install :: Makes A Package Part Of Online Update?

Sep 7, 2010

how certain packages such as glib, yast2, etc. are part of "Online update" i.e. new versions show up there, whereas certain packages are not (e.g. NVIDIA drivers). Is it a setting on the repository, the package, or does the new version need to be labelled specifically?

View 3 Replies View Related

OpenSUSE Network :: Wireless - Got Stuck On The Obtaining IP Address Part

Jan 7, 2010

I just installed openSUSE dual-boot with windows. Wireless works fine on windows. Only ethernet works on openSUSE. At first, it couldn't even find my wireless network. With my friend's help we experimented and tried everything to find the driver for my broadcam4312 driver.

Later, my friend some update from the official openSUSE peeps... Then, the wireless could my network. I entered in my password and then hoped for the best but then it got stuck on the Obtaining IP Adress part. I know I got the rite password.

View 9 Replies View Related

OpenSUSE Install :: Format The Parts Including /Home And Retain The Win / NTFS Part?

Jul 17, 2010

Attempting install of 11.3 on previous 11.2 dual windows boot box. I want to format the Linux parts including /Home and retain the Win / NTFS part. (dual boot) Peculiar behavior of install DVD. Here is fdisk -l that clearly indicates a 500 GB HD and the Win partition, extended partition and the 3 basic Linux partitions and they seem okay in total.

Linux-mocx:/ # fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x252d252c


I aborted the installation. What could possibly cause the 11.2 parts and bootloader to get this wacked up ? Outside of some sound issues the 11.2 install works okay for the most part. No crashing or lockups. Really want to get up to 11.3. though. I obviously have some work to do with 35 GB of missing space on the HD and Grub living someplace on the wrong side of the river. Suggestions and a pointer or two would be most welcome guys. ( I really don't want the pain of installing that �other� OP system or I'd reformat and reinstall nice and clean.) Do I need to repartition, change mount points and reinstall Grub maybe.

View 9 Replies View Related

OpenSUSE :: International Keyboard Switching Is Missing In KDE Opensuse 11.4 X86_64?

Aug 10, 2011

on a newly installed opensuse 11.4 x86_64 I am unable to find the settings to switch keyboard layout from english to german to french or any other language .it used to be in the system settings Keyboard-->Keyboard layouts -->> activate german btw french etc...

View 2 Replies View Related

OpenSUSE Hardware :: Scanadf (part Of Sane-frontends) / Rpm Of Sane-frontends?

May 22, 2011

Does anybody know where to find an rpm of sane-frontends?I want to use my auto-document-feed functionality on my scanner using scanadf, which is part of sane-frontends.Otherwise I'd also welcome alternative suggestions for scanadf.

I'm running Suse 11.2 and using a Brother DCP7065DN scanner/printer, which actually comes with stunning drivers and support for Linux.

View 2 Replies View Related

OpenSUSE :: Cannot Run Scanimage Because Of Missing Lib?

Jan 17, 2010

I have updated my system from 10.3 to 11.2.Now I cannot run scanimage because of missing lib.rpm -qf /usr/bin/scanimage sane-backends-1.0.20-8.3.i586

ldd /usr/bin/scanimage => (0xffffe000) => /usr/local/lib/ (0xb77f6000)


View 1 Replies View Related

OpenSUSE :: Commands Not Available Missing (MAN In Particular)?

Aug 8, 2010

I recently created a SUSE Linux Enterprise 11 SP1 VM at susestudio. I am a total SUSE novice...I seem to be missing several commands from the command line... in particular I do not have the ability to run man.If I try to man anything I getbash: man: command not foundI checked, and the man-pages package was not installed, so I did download and install, (and rebooted) but still no luck running man

View 6 Replies View Related

OpenSUSE :: Missing Plasmoids In KDE 4.6.5?

Jul 19, 2011

After upgrading to the above, I find that some plasmoids are missing: RSS Now, Dictionary, Calculator (of the ones I use). The most important one for me is RSS Now, indeed there is no RSS plasmoid at all offered anymore. Downloading new plasmoids doesn't offer anything, and I can't find it on kde-looks either. Has anyone else noticed this, and how I can get RSS Now and the other back?

View 7 Replies View Related

OpenSUSE :: GMP Missing From The Repo?

Aug 25, 2011

What is the best way to install GMP onto my OpenSuSE 11.4_64 box? I see gmp-devel is listed in the repo for download, but I need binary gmp. I'm guessing I'll have to use something like SuSE build service or compile from source.

View 3 Replies View Related

OpenSUSE :: Tomcat6 - Missing ?

Dec 31, 2009

I have installed Tomcat6 succesfully from Yast. Now im wondering where is file located ?

Tomcat is running fine, but i'm needing that startup script for deploying web service directly from Netbeans IDE.

The default init script is found from /etc/init.d/tomcat6, so is included to this installation ?

I'm using Opensuse 11.2

View 4 Replies View Related

OpenSUSE :: New Install, Pppoe And Gcc Missing?

Mar 12, 2010

I installed openSUSE a couple of weeks ago but didn't use it until 2 days ago. It was the latest version when I installed it.To my surprise there wasn't a gcc or pppoe installed. Or at least there wasn't a command line begging with ppp.I tried to install them both with rpms. I think I got them both, just they don't work very well. In particular rp-pppoe doesn't work at all. It says that there's no modem on eth0, which is very true there's only a eth cable. gcc seems to work but I'm not sure I installed all the dependencies.I can't use yast because of lack of internet. I have to reboot to windows and download rpms.Can you give me a work around? At least for the pppoe then it might fix itself. Can I have some EXACT links to rpms or another solution?

View 4 Replies View Related

OpenSUSE :: 11.2 With KDE 4.3.1 Desktop - Taskbar Missing

Mar 18, 2010

I have openSuse 11.2 with KDE 4.3.1 desktop. I accidentally closed my taskbar and now I can't get it to reappear. I already tried to run kicker (Alt + F2), but that didn't work.

View 4 Replies View Related

OpenSUSE :: PCP / PMCD Directory Missing In 11.2?

May 12, 2010

Looks like somewhere down the line the pmda's for pcp fell out of the distro? The pmcd config (in /var/lib/pcp/config/pmcd/pmcd.conf) shows that pmcd expects 2 pmda's.

bypass:/var/lib/mooty # cat /var/lib/pcp/config/pmcd/pmcd.conf
# Performance Metrics Domain Specifications
# This file is automatically generated during the build
# Name Id IPC IPC Params File/Cmd
pmcd 2 dso pmcd_init /var/lib/pcp/pmdas/pmcd/
linux 60 dso linux_init /var/lib/pcp/pmdas/linux/

Yet the whole /var/lib/pcp/pmdas directory is missing.

View 1 Replies View Related

OpenSUSE :: Some GL Standard Screensavers Missing In 11.3

Jul 17, 2010

I run a molecular biology lab and we like to run the "Molecule" GL screensaver in order to look cool (I know it doesn't actually save screens, and it wastes energy, but you know..). I'm about to install Opensuse 11.3 on all 24 of our laptops and I find that the number of GL screensavers installed as standard is greatly reduced from previous Opensuse releases. Any idea where I can get the "Molecule" and other screensavers?

I am running KDE and have the following relevant packages installed:
This apparently gives me just 8 GL screensavers - there used to be a great many more?

View 3 Replies View Related

OpenSUSE :: Start Print Has Gone Missing

Oct 8, 2010

A couple of weeks ago I installed openSUSE 11.3/KDE 4.4.4 over openSUSE 11.0/KDE 3.5. It went well except for what turned out to be a glitch with the KDE default Plasma Desktop Workspace, which prevented the system from shutting down (the screen would go blank and then nothing would happen). Changing the Activity in the Desktop Settings to Folder View got rid of the glitch, returning everything to normal.

The printer icon/widget is now a question mark "?." I can't say for certain when this happened.Clicking on the widget produces the message, "KDEint could not launch 'opt/kde3/bin/startprint'."The command for the widget is 'opt/kde3/bin/startprint %U'.The file opt/kde3/bin/startprint no longer exists.What additional information, if any, might be needed, and what can be done to get this widget working again?

View 8 Replies View Related

OpenSUSE :: Remmina Protocols Missing On 11.4?

Mar 14, 2011

On openSUSE 11.3 I was using remmina as a replacement for tsclient. After upgrading to openSUSE 11.4 (Did a complete new install) Remmina only seems to support SSH connections. All other protocols like RDP, NX and VNC are missing. I got FreeRDP and rdesktop etc. Installed and can connect to RDP sessions from the terminal.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved