I've done a lot of googling for this, but always found code that does not work on my compiler.Could anyone please post a small (working) program through which I can store the starting time of the program (milliseconds) and get the ending time of the program in integer variables?Am working on Fedora 8, and with the gcc compiler.
View 2 RepliesI have a script that executed 100000 C Programs, reads the commands from a file and executes them. There is a requirement to measuer the time that each of this 100K C programs running.If it exceeds 120 sec I want to Kill that Process.Any Idea to embed this in my shell script?
View 4 Replies View RelatedI am troubleshooting file copy time issues between 3 servers. I need to copy the same file from server A to both server B and server C and compare the elapsed times for the copy. Is there an easy way to do this?
View 3 Replies View RelatedIt is possible to not only have the progress of the shredding, but the time elapsed/remained/whatever as well? It would be great to be able to see the time elapsed/time remaining along with the percentage complete.
View 4 Replies View RelatedWhat is the best way to track elapsed real-time, for the most kinds of Linux systems?
clock_gettime() looks great, but I get this build error:
undefined reference to `clock_gettime'
..even though I have #include "time.h" Here is my uber-goal:
// Returns fractional seconds that have elapsed since Start_Ticks was set.
float elapsed_seconds( unsigned Start_Ticks )
{
[code]....
I am a beginner to C and C++ and so far I have learned two ways to measure the time my program takes to run.
Method 1: Just compile your C file and if the executable is say a.out just type time ./a.out
Method 2: Here the general structure of the code is
Code:
#include<stdio.h>
#include<time.h>
int main(void)
[Code]....
Question 1 Do Method 1 and Method 2 return the same times?
Question 2 Method 1 gives three times real, usr and sys . Is it true that USR+SYS= TIME GIVEN BY METHOD 2
I have performed some experiments with small codes which return the squares of numbers uptill 36000 and I feel the answer to question 2 is yes
I am using a simple plain Debian Lenny base system (No X). I would like to measure how many seconds my system takes to boot - time between hitting enter key on GRUB screen to login console on tty1.One obvious way is to measure it manually by looking at your wrist watch or an external timer but I would to measure it more accurately - something that is built inside the Operating System.
View 5 Replies View RelatedI'm just wondering what the limits for time are. I have a program that always takes exactly 20 ms, so I assume this is the lowest it can measure, but I want to see if there's some sort of documentation of this.
View 3 Replies View RelatedI have Squeeze with 2.6.32 kernel, fresh installation and Intel 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device.I have done all updates, but Gnome Desktop freezes every day completely, I can move the mouse, but nothing happens.Keyboard works, but I can press only Ctrl-Atl-F1 and Ctrl-Alt-Del to reboot.
May 23 20:19:56 Squeeze kernel: [ 644.868007] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
May 23 20:19:56 Squeeze kernel: [ 644.868018] render error detected, EIR: 0x00000000
May 23 20:19:56 Squeeze kernel: [ 644.868724] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 8250 at 8249)
I want to record an internet radio station starting at 2:00am tomorrow morning. The specific program on the radio station lasts until 6:00am. The command I need to run to record the station is: Code:mplayer http://wjcu.jcu.edu:8001/listen.pls -ao pcm:file=indie_heat_of_the_night.wav -vc dummy -vo nullI'd use cron, but 1. I'm not sure how to and 2. it seems unnecessarily complicated for something that I only want to run once. If cron is the only/easiest solution, I guess I'll just have to resort to that, but I'd rather not.
View 12 Replies View RelatedThis is probably a simple question but I really don't know!How do you measure a case fan to know it's true deminsions whe one is talking about them or whatever?For an example lets use an 80 mm fan, is it measured from the "Frame" size witch is the total size of the fan or what?
View 14 Replies View RelatedI was wondering if there is a way to see how much power my computer is using while using Ubuntu. I know there are hardware devices, plugs, I can use but I didn't know if there was a computer program that I could use that would do the same thing. I am currently using an IONITX F-E, 2Gb 800mhz RAM, 6 Green WD 2TB drives, and plan on getting a blu-ray drive installed in the last slot. I am also using a PCI-E x4 SATA card, and using software raid 5. I have a 350 watt psu installed and would like to remove it and install a pico-psu but the pico seems to max out at 200 watts.
View 2 Replies View RelatedI've found various programs and methods to measure FLOPS, but I don't seem to understand them. What is wrong with the following?
test-flops.py
Code:
#! /usr/bin/env python
float_increment = 1.03 # random
start = 57.24 # random
floating_point = start
for i in xrange(10 ** 6):floating_point += float_increment
Code:
PROMPT$ time ./test-flops.py
As far as I can see, this times a program that performs 1 million FLOPs (namely incrementation).
This outputs about 1.2 seconds on my (reasonably fast) machine, giving 840kFLOPS, which is much too low.This post may be in the wrong section; a C translation increments the result by three orders of magnitude (ie, py sucks), but this is still considerably less (~ 7-fold) than published values.
I want to know the actual maximum throughput of my lan at home.Could you suggest some free monitoring tools for me to use
View 2 Replies View RelatedI need to measure the time it takes for a program I'm writing to do Its job in microseconds resolution. I'm using Ubuntu 10.10. My Idea is, to write a device driver that directly reads the counter that produces the interrupt of RTC ticks. How do I do this, for a Linux kernel and a PC hardware?
View 4 Replies View RelatedWhat measuring system does partitioning step in Debian installer use - metric or JEDEC? I.e. it uses MB, which in JEDEC means 1024^2 bytes, and in metric means 1000^2 bytes.
View 3 Replies View RelatedI need to find out the processing or operating time in milliseconds or in nanoseconds for the instructions or for the whole process!
for eg :
I need to calculate the time taken to execute :
And i dont want the time for whole program :
I need to write a program for time. like i have 2 tasks both minutes and hours.
like this
1st task=5 hours and 30 minutes
2nd task=2hours and 45 minutes
Together they will take 8 hours and 15 minutes.
I need to write a program thats called ADDTIMES to do something like this.
This is what i have so far.
H1=int(input("enter the number of hours:")) etc..
I do this every time.
Code:
ifup dsl0
How can i set this to start at boot time?
Only one program can use sound at a time? Any fix?
View 2 Replies View RelatedI have made a vb6 porgram, it is running without any error in windows platform. However, i want it to be run at Fedora too. I run my program with Wine Windows Program Loader in a Linux pc, but the program stuck with an error message:
Run-time error '429':
ActiveX component can't create object
I thought it was the error message because of missing some dll/reference files, so I tried to copy all those related .dll & .ocx file into my wine file. (Just copy and paste into the system32 of wine, no regsvr32 statement to register the .dll as what we always do in Windows.) However, all my efforts are in vain. I not sure what is the cause of this error.
im trying to calculate how much time does my program run, use very simple script
clock_t end, start;
start= clock();
int i;
printf("initial %d
",(int)start);
[Code]....
but it outputs 0 all the time. cant figure out where could be the problem.
i have the example code below, i want to calculate the time taken for a sample program to run. but i keep getting undefined reference error.
#include <sys/time.h>
#include <iostream>
int main(int argc, char **argv) {
struct timeval startTime;
struct timeval endTime;
[Code]...
I am making a program to do a breadth first search.The code which I am posting here just makes a que of the nodes visited in a binary tree in inorder fashion,so this implementation is not yet complete.While developing I got a segmentation fault which I was not able to understand why I am getting so I am posting since the tree of same program (without BFS) is working.
Code:
#include<stdio.h>
#include<stdlib.h>
[code]...
I tried to draw two lines with xlib.h in C. If I start this compiled program it show me in most cases a window with two lines as it should be.
But sometimes the two lines are not drawn.If I insert XFlush() before the second XSync() it worked better but not every time.Why?How can I solve the problem?How works the X-Server buffer in detail?
Code:
i wanted to know how can I make my programs or script automatically start at boot time ,for example if I restart my server at any time they start at boot time automatically with no need to any body to start them.
View 2 Replies View RelatedI have written a programme in gcc
#include <time.h>
#include <stdio.h>
int main(void)
[code]...
I am having trouble with encryption/ decryption program. The program goes out and finds the file I want it to, encrypts it into a continuing series of a single repeated negative number, then generally decrypts(or should i say re-encrypts)it into a widely repeated character, different but same results every time.
[Code]....
i am graduate student and my X colleague gave me this Fortran 77 program to run my result files with. She is no longer reachable. I compiled the following program with gfortran, it compiled well but, when i run it, gave me end of file error. My output file (which is the input file for this program (DFILE1) ) has about 78,000 lines of velocities of atoms (Vx, Vy, Vz with 1000 steps.. an example of some of the atom's velocities in the 1st step is given at the end of this program). I will be highly obliged if any one can help me with this.I run this program on opensuse linux 11.3 version /32 bit/i586
error message:
Code:
At line 124 of file v.autocorrelation.f (unit = 10, file = 'DFILE1')
Fortran runtime error: End of file
Code:
PROGRAM TCORR
COMMON / BLOCK1 / STORX, STORY, STORZ
COMMON / BLOCK2 / VX, VY, VZ
COMMON / BLOCK3 / VACF, ANORM
C *******************************************************************
code....
I have some questions.First, how can i obtain a process execution time ( after it terminated)??? Second, in a multi-core system like SMP how can i run different processes on different cores explicitly? i.e. how can i assign a process to a specific core?
View 1 Replies View Related