I'm compiling some applications in a pc, using:
Code:
./configure
make
make install
but I want to run the applications in another pc, so I have used the option --prefix=/some/directory/ when executing ./configure, so I could just copy this folder to the other pc. However, my programs now need to have libraries and shared files in the same location that I used with --prefix, instead of /lib, /usr, etc.
I'm trying to figure out how Make handles directories.
How can I modify this makefile so it will put all of the .o files in a separate build directory?
Code:
But make ignores this and still puts main.o in the base directory. And if I refer to the build directory in the dependencies for bandit, make complains about "no rule ..."
I want to keep main.cpp in the base directory, all other sources in the src directory, and all object files in the build directory.
I just downloaded slackware 13.1(x86) and i'm trying to compile ndiswrapper-1.56 using the slackbuild from slackbuils.org and i'm getting this error:
Code:
Makefile:535: /usr/src/linux-2.6.33.4/arch/i486/Makefile: No such file or directory
make[2]: *** No rule to make target `/usr/src/linux-2.6.33.4/arch/i486/Makefile'. Stop.
make[1]: *** [modules] Error 2
make: *** [all] Error 2
looks like the folder i486 doesn't exist
Is there an option for default owner of files and directories in Samba-shared dirs?
View 4 Replies View RelatedWhen I select "Ubuntu desktop" from gdm, I get a blank screen (with wallpaper) and no evident functionality. The mouse pointer is present, but I have no panel or desktop menus. The file .xsession-errors contains the following:
Code:
/etc/gdm/Xsession: Beginning session setup...
No default user directories
[code]....
I'm just wondering: I know that umask sets the default file permissions for files, however I want to know if there is anyway to set default file permissions for newly created directories.
For example, I want my user to create new directories that anyone can access and modify (777) but I want the new files the user creates to be 755 (read by everyone, written only by user).
Is this possible?
I've got a small issue that when a Windows user creates a new folder through Windows Explorer (from the menu or by right clicking) the new folder is only accessible to that particular user. Example: user SABKAR (member of the HR group) creates a new folder called MarcTestMenu in a shared Samba directory through Windows Explorer:
[Code]....
At this point user MORAMY cannot copy a file or open the directory MarcTestMenu. MORAMY gets a 'not accessible' error message in Windows. If I su to the Samba box and issue this command:
[Code]...
how I can get the correct default permissions when users create directories through Windows?
I have a fileserver running openSUSE 11.2 and samba services for file access from MS Windows based workstations. My question relates to changing default permissions on files and directories created from the windows clients.
Following are extracts of the /etc/samba/smb.conf file :
Even with the above entries, sometimes there are files and directories created by the windows clients having permission
Probably my lack of understanding in ACLS.
i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies View RelatedI want to make a webserver with multiple users allowed to login through SFTP to a specific folder, www.Multiple users are added, lets say user1 and user2, and all of them belonging to the www-data group. The www directory has an owner www-data and a group www-data.
I have used chmod -R 775 on the www folder, but after I try to create a folder test through my SFTP server (using Filezilla) the group of the directory created has only r and x permissions, and I am not able to log in with the second user user2 and create a directory within www/test due to a lack of w permission to the group.
I also tried using chmod 2775 on www directory, but without luck. Can somebody explain to me, how can I make it so that a newly created directory inherits the root directory group permissions?
I'm installing a package but that package doesn't has "makeFile" file, it only has "makefile.am" and "makefile.in". therefore when ever i use the "make" command i get: "make: *** No targets specified and no makefile found. Stop."
View 2 Replies View RelatedI am writing a script, in that my requirement is, if all the fill types stored in one directory from that we need to separate different different directories based on the file types.
for example in a directory(anish). 5 different types files
1- directory
2- .txt files
2- .sh files
like that and my requirement is the (1- directory is moved to one new directory(dir) which we are given in the script)and (2 .txt files are moved to another new directory(test) which we are given in the script)and ( 2 .sh files are moved to another new directory(bash) which we are given in the scrip)finally the directory anish should be empty..using bash script.how it is possible !!
Is it possible to restrict users to their home directories and allow admins to have different home directories? Essentially I want users to have a folder in /var/www/html/$USER and admins to have either unrestricted access or have their root directory be ./ or /www or /etc. I have is set now so users have access to thier home direcotry but I need to upload web files as admin.
So far I have created:
chroot_list
user_list
[code]....
I have problems with linking object files.
This is what I get:
Is it possible to debug a makefile? In a bash script I can use "set -x" so that all variables are shown with their values. I am looking for such feature in makefile to see the variables and their values.
View 2 Replies View RelatedI want to define _LINUX in my makefile which I would be using in my source code like #if _Linux. I do not want to #define _Linux __linux__ in my source code.
View 2 Replies View Relatedat present I compile the same code for different systems (cross compilers)I need to call libs and include paths for the different processors. At present I simply comment out the paths not needed
eg
#INCDIR = -I/cross1/.......
#INCDIR = -I/cross2/.......
[code]....
I seem to be running into this issue a lot when installing various programs. I downloaded and installed a tar file (Linux Wacom Project. xf86-input-wacom-0.32.0 specifically) for my Bamboo tablet. Here's what I did:
Code: Select allsudo apt-get install build-essential
Looks like everything went well, but it asked me for a CD?... I just ignored that and went to the next step in the guide.
Code: Select allsudo apt-get build-dep wacom-tools
Looks like everything went well here. But near the end I get this...
Code: Select allchecking for doxygen... no
configure: WARNING: doxygen not found - documentation targets will be skipped
checking for rint in -lm... yes
checking for XORG... no
configure: error: in `/home/mason/Desktop/xf86-input-wacom-0.32.0':
configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.
Alternatively, you may set the environment variables XORG_CFLAGS and XORG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I didn't really pay attention to THAT until I do...
Code: Select allcd ~/Desktop/linuxwacom-0.8.8-6
./configure --prefix=/usr
make
Where in I get this error message after I enter in Code: Select allmake at the terminal
Code: Select allmake: *** No targets specified and no makefile found. Stop.
Try to understand a Makefile. It has (all: $(VAR1) $(VAR20) Makefile). What does this "Makefile" mean?
View 2 Replies View RelatedI have a linksys AE1000 wireless adapter, I have the proper driver, and I was able to install it on ubuntu to by typing cd (directory) make make install On Fedora 13 when i type su Cd (directory) make I get this after i hit enter after i type make
[root@Renegade wireless]# make
make -C tools
make[1]: Entering directory `/home/Renegade/wireless/tools'
gcc -g bin2h.c -o bin2h
[code].....
can anybody tell the use of make file in Nis server.
View 1 Replies View RelatedI have encountered some cases that the ./configure log says:
config.status: creating xxx/Makefile
but when make fails on:
...
make[2]: Entering directory xxx
make[2]: *** No rule to make target `all', Stop
...
and xxx/Makefile is absent in the disk. Why does it happened?
I am a beginner in Linux. Never did any kernel programming in Linux/Windows before. I am now on a project and I am supposed to understand a Linux Device Driver Code. It contains 6 .c files and 1 Makefile.
The make file goes as this:
I have a.c b.c c.c d.c d.c e.c f.c in the director along with the Makefile mentioned.
I am using Fedora Red Hat Linux 32 bit.
How to compile the Makefile.
in directory a_dir, have a file named a_file.i can type "source a_file" under directory a_dir and execute successfully.but if i write the command to a Makefile under directory b_dir, the "source" function can't be executed well. it will generate some error message like this:
./a_file: line 1: setenv: command not found
./a_file: line 2: setenv: command not found
./a_file: line 3: setenv: command not found
./a_file: line 5: setenv: command not found
I want to write simple non recursive makefile, but I am not getting syntax of it. Please give me example with simple description. I had read docs, html's but I am not getting how that works please give simple example. consider I have following directory structure.
[Code]...
I need to write an else-if condition in a makefile, and though the format is posted on several websites, nothing seem to be working, andI get an error everytime. Could anybody please write a small example with an else-if conditional in a maekefile?
View 1 Replies View RelatedI'd like to write a top-level Makefile, and define environment variables further in deeper Makefiles:
/tmp# cat main.mk
Code:
export TEST=dummy
/tmp# cat sub.mk
Code:
include main.mk
[Code]...
1. How to complement an environment variable to add data as we chain multiple Makefiles?
2. How to actually export variables from Makefiles so that they are available in other Makefiles?
I download a package of tar.gz ...
1:firstly I extract it on desktop
2:Then use cd command and go to extracted folder
3:To install that package i use
sudo make install. Then I got a error message
"make: *** No targets specified and no makefile found. Stop."
I'm trying to write a make file to deploy software in a production setup.
The first thing I'm trying to do is detect if the user running the make is root.
From the documentation scattered about, I came up with this:
Code:
USERID=$(shell id -u)
all:
$(info User Id is $(USERID))
ifeq ($(REQUIRED_USER),0)
$(info Running as root... OK)
[Code]....
As you can see, in both situations, make executes both branches of the conditional.
Makefile.in a file that is generated by tool, why it is in the source package? I am asking since , when I modified Makefile.am, I need to run automake to update the makefile.in, while I don't think this should be done manually.
View 2 Replies View Related