I want to install some extra software on my Debian system (TexLive and NLTK) for which I can't find recent versions in the repositories. Both use their script-based installers. Where is the best place to put these on a Debian system? /usr/local/ or /opt or another place? Is that best I use ROOT or does that not matter?
View 7 RepliesIs it possible to install a local .deb package with synaptic package manager? I managed to trash network-manager-gnome removing it by mistake instead of a package with a similar name..... oops. So now have no network connections. I downloaded the following file network-manager-gnome_0.8~a~git.20091014t134532.4033e62-0ubuntu1_i386.deb via a computer with a net connection. and now have it on a usb key. Can I point the synaptic package manager to the local package and install like that, or do I have to do it via the console. I also have my original Karmic 9.10 disk, which I imagine has the package on as well. Is there a way to add it via the system installer?
View 4 Replies View RelatedI have created a local repository to install linux with. (class assignment) Created the following file structure off of /html directory;
/yum/base/13/i386
/yum/updates/13/i386
copied the contents of the packages from my fedora dvd;
mount /dev/cdrom /mnt
cd /mnt/Packages
cp -v * /var/www/html/yum/base/13/i386
cd /
umount /mnt
using rsync against fedora mirror updated the base to have compete set of .rpm packages from the Everything directory. Ran createrepo /var/www/html/yum/base/13/i386 Verified repodata folder was created and the contents are correct, shown below
[Code]....
Boot the PC and start the install using a kickstart file (if you need to see it let me know), all runs fine until it gets to the point of resolving dependency then it errors out - unable to resolve dependency against the repository. May not be the exact phrasing but generally speaking to that effect.
Is it possible to partition a hard drive with Debian already installed and put a live disc image in the second one and use grub to boot it. Then using this boot to the installer and install to the first partition.The answer for why I want to try this is that I have a computer that runs a robot that needs Debian. There is no CD, USB, or internet currently on the drive. there is an Ethernet plug, but It won't work until the OS is in place. We tried taking the hard drive and installing Debian to it from a USB stick on another computer, but it has the wrong Ethernet drivers and we can't get it to talk to the internet on the robot's computer.
Everything else is fine, but with out an internet connection the robot will not work.If your interested the board is an old Versalogic VSBC-8 and the robot is a Pioneer 1 from Mobile robotics. The hard drive (not that it matters) is a standard 80GB IDE notebook drive from Western Digital.
I was under the impression that if I have any programs not installed by the package manager, they belong in /usr/local rather than /usr. But if I put the executable in /usr/local/bin, and the jar files into /usr/ local /lib, I get runtime errors about being unable to load the Java classes. So I resorted to putting things in /usr/bin and /usr/lib and it worked fine.Is this something that can only be corrected by compiling differently, or am I missing an installation step?
View 2 Replies View RelatedI have been given a task to install samba server from my local PC in an another PC which is a linux server. The linux server is in my own company and I have been given its ip address and root login password. I don't know how to install that samba server from my own PC.
View 3 Replies View RelatedI wish to use the new Eclipse Galileo, and so far it works fine... out of my home directory.I would like to install this system-wide, so that all my users can use it just the same.I assume the destination would be /usr/local/bin, but when I put the directory there and link the executable as /usr/local/bin/eclipse (linking to /usr/local/bin/eclipse_bin/eclipse), I get shared library errors.This was a failed attempt at a hack, so I would like to know: where can I put the files so as to properly do this installation?
View 1 Replies View RelatedI am trying to install ubuntu from an ISO on a FAAT32 Partition. Is there a way of booting into the FAT32 partition with the ISO on it, and mount it to install from, from the Debian installer ?I have been searching for over a month now and still have not found anything that gives some information on how to do that. I remember that i was able to make a rescue disk for Fedora 5 and use the installer from it and select the partition and then the iso i wanted to use.
View 5 Replies View RelatedWe have a combination of Red Hat Enterprise AS 3.0 and LTSP 4.2. There are 100+ users connected to a single server through Thin Client due to which the server is overloaded and degrades the performance. So I want to know how to install LOCAL APPS on LTSP 4.2 so that I can reduce the load on server.
View 3 Replies View RelatedI have fedora 11 as a host and two guest os rhel5 on VirtualBox. I wan to install a local repository on fedora 11 so that my guest os rhel5 can install packages through http with yum.To do this what I have done so far:
>Install httpd
>chkconfig httpd on
>service httpd start
>createrepo -v /var/www/html/rhel5/
>create file rhel5.repo in guest os /etc/yum.repos.d/
Code:
[RHEL5]
name=rhel5
baseurl=http://192.168.1.1/rhel5
gpgcheck=0
Here 192.168.1.1 is my fedora 11 local IP but have a look on the following error msg:
Code:
[pc5 ~]# yum install nfs*
Loading "rhnplugin" plugin
Loading "installonlyn" plugin
[code]....
fact is same process i have followed when i had rhel5 as a host os and i found no problem.Is there any problem with fedora 11 createrepo command that does not allow rhel5 to install package over http.
When I try to install Cinelerra I get this error:
Local file conflict between packages
Two packages provide the same file. This is usually due to mixing packages from different software sources.
Test Transaction Errors: file /usr/bin/mpeg3cat from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3dump from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3toc from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64
I have FC10! so far i have downloaded the mplayer and its codecs.further i extracted both the packages( in DOWNLOAD folder).but I'm not able to extract the codecs in the /usr/local/lib/codecs directory.it says you do not have permission. how should i know whether to compile the mplayer or is it pre-compiled?
View 10 Replies View RelatedI have a postfix mail server on ubuntu 10.04 lts behind a router. so all local users are fetching/sending mails through ms outlook using local IP. Sometimes when internet goes down and any mail send then it bounced back immediately saying domain not found. Can u please tell me how i configure to hold all mails in postfix server rather than bounce when internet fails and will pass through when restored the internet around 15-30 minutes?
View 2 Replies View RelatedOne of Konqueror's unique features is that i can name a local process as the action in a form. When i submit that form, the local process is executed. Very helpful for certain offline tasks. What would make it even better is if i could find a way to pass some data to that local process from the html page. This could be the content of a hidden input item, etc. Alternatively, if there is a way for Konqueror to create or update a local file with data from the html page, that would acheive the same end.
View 1 Replies View RelatedI'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies View RelatedI have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies View RelatedWhat command would you use to read about the sync system call (not the sync command)? How would you read a local man page for sync that was kept in the /usr/local/share/man?
View 2 Replies View RelatedI am trying to install tilp, a program for the link between a computer and a Texas Instruments calculator. I have downloaded all the packages to a local directory. I tried telling yum to install all the packages at the same time, though, the dependencies still fail to resolve (though they are all in the directory). I don't know if it would be safe to force install without the dependencies (even though I would install them later).
View 4 Replies View RelatedI just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.
However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.
Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
What is the minimum configuration to postfix that I need to do (i.e. to its main.cf file) in order to have the following:mail go from user1 on comp1 to user2 on comp2 on same landemonstration:
user1@comp1# Mail -v "" user2@comp2.somelan.com
hi there
[CONTROL-D]
[code]...
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
Let's get clear with all bin and sbin folders(from filesystem hierarchy standard):
So the question is: Why there are so many directories and what are the meanings of /usr/sbin, /usr/local/sbin and /usr/local/bin?
Many programs are distributed through archives and we have to build them from source code. Usually they have makefile so it's quite easy. This process involves creating files in usr/local/lib, usr/local/bin... usr/local/whatever without creating specific folders for a given program.
I think it's not right because if we need to remove the program we have to manually delete every of its files if the program's creator didn't take care of it.
I'm using f12. My university has recently become a mirror for fedora packages. But i'm facing a trivial problem. I have set proxy for yum so that the packages that are not available on local mirror can be downloaded from other mirrors. But then i don't know how to set no proxy for my local server. Consequently it is not using my local mirror at all. Tell me how to set no proxy for the local mirror. I want my local mirror because it's damn fast. My proxy settings are like this (they go in /etc/yum.conf):
[code]....
I wanted to use ssh with local ip adress. Because of this I install vmware in my pc that I run windows XP SP2 in t. And Create in it. After that I install Centos 5.4 32 bit. For that how can I arrange centos network configration?
View 1 Replies View RelatedBefore or after login?
View 4 Replies View RelatedI have local repo as well the debian official repos enabled in the apt sources.list, but when i run the aptitude to install some packages, it doesn't use the local repo and downloading the same version of package again that is already present in the local repo, this is my local repo url: [URL]
View 10 Replies View RelatedOn a test ubuntu computer at my work, tests run often run wrong and all privleges for all accounts are revoked. This is, to say the least, annoying. Is there any way to create a SSH password for just that console to access it locally in the event of such a lockout? We cannot connect any other computers to it for security concerns.
View 6 Replies View RelatedI am having big trouble with rc.local on my system.My system is CentOS 5.5 64X.My default startup is is 3, so rc3.d is where I was looking into.rc.local with permissions 755.Inorder to solve the problem I made the following test
.
1. No matter how I edit rc.local, it will not be executed, even a copy from other Linux system that runs rc.local fine.
2. All S99 service under rc3.d won't run when S99local is there.
3. All service executed just fine if S99local removed from rc3.d.
4. If I change S99local to S97local, Anything in S97, S98, S99 won't run.
5. I tested rc.local with Code:echo "rc.local is executed just fine" >> /root/test.txt by adding it after "touch /var/lock/subsys/local" [FAILED, test.txt not found after restart]
6. I tried to execute rc.local with Code:sh /etc/rc.local it was SUCCESSFULLY executed without any error, and everything in rc.local runs fine.