Software :: Installing On A Founder Laptop?

Jul 2, 2010

wish to install linux ona founder laptop. how do i do it?

View 2 Replies


ADVERTISEMENT

Red Hat :: Installing RH 7.1 To A New Laptop?

Feb 1, 2011

I just installed Red Hat 7.1 on a HP computer P4 and it installed except for and exception as it was booting up of: lib/modules/2.4.3-2/kernel/drivers/usb/usb-ohci.0:insmod usb-ohci then it says: "failed" The software went ahead and installed but now I get "localhost login: and no matter what I type in, it will not allow me to put in a password and then says: login incorrect I have never used Red Hat before so I am green at this. I also tried to install Oumbuntu before and got t he same error message when the system was booting up.

View 3 Replies View Related

Fedora :: Installing F14 On Xp Laptop?

Dec 29, 2010

So I aquired an old laptop on it with xp and I am wanting to wipe the current xp installation and reformat the drive and install fedora. How do I go about formatting the hard drive? I currently have the live cd image but I am not sure if I can format the whole drive while in the live cd mode. I have only ever used linux side by side with windows so i have never needed to do a reformat in a linux environment.

View 1 Replies View Related

Fedora Installation :: Installing 12 On A Laptop?

Nov 20, 2009

I really want to try it on my Dell E6400 (it runs Fedora 10 right now).

View 14 Replies View Related

Ubuntu :: Installing UNR On A 15.4 Inch Laptop?

Jan 26, 2010

I'm currently running Ubuntu 9.10 desktop edition on my full size Dell Inspiron 1525 (15.4 inch widescreen display)I was wondering, are there any benefits to installing UNR (Ubuntu Netbook Remix) on my laptop instead of the desktop edition? I guess that boils down to performance/battery life.

View 5 Replies View Related

Ubuntu Installation :: Installing 10.10 On A New Laptop HP G62 - B45

Feb 28, 2011

I am facing problem while installing ubuntu 10.10 on a newly purchased laptop HP G62 - B45,

Problem: Screen becomes blank after selecting language and press Forward.

I can run the live CD. I can install from wubi(like a windows application) But I could not install to a new partition.

As mentioned in link [URL] thread, i tried by pressing F4 while booting from CD. but i am not getting the "Safe graphics mode" mentioned here.

below is the configuration of the laptop

3 GB RAM,
320 GB HDD,
512 MB Dedicated Graphics
ATI graphics

View 2 Replies View Related

Ubuntu :: Installing VNC On Laptop Only Using VGA Mode

Jul 24, 2011

The graphic card on my Asus A8Js died and now i'm left with a perfectly good laptop (everything except the graphic card works) that is too expensive to repair! I got a new one already since I really need it for working.

I'm able to boot on to the winxp which is currently installed by plugging another monitor to the VGA exit on the laptop, but only into to VGA mode and with some artifacts running through the screen (lines and dots and what not). If I let it boot in normal mode I stop getting signal on the external monitor and that's it.

I would like to know If it is possible to do a full installation of Ubuntu on this laptop and then run with normal GUI but on VGA mode to then install VNC or something of the kind. VNC would permit me to use the computer without an external monitor and thus install and manage more stuff.

I guess that a command line only install of ubuntu would also be another option, but I'm not that fluent with command line.

A8Js hardware description: [URL]

View 9 Replies View Related

Installation :: Installing On Laptop From 90ties

Apr 13, 2010

I've got an old laptop Toshiba Tecra 730CDT (Intel Pentium 150 MHz, 48MB RAM, 2GB HDD, Network interface PC card). It is running Windows 98 right now, but I'd like to put some poor-hardware-friendly Linux distro, and then pass this laptop to my kids for incremental destruction, in process of which, I hope, they learn some computer skills.

There are two major questions I face: 1) What distribution would be the best for this? Of course, I am looking for some with lean yet decent-looking X implementation. Well, I always can take one distro and other desktop environment. 2) I find it challenging to try out or install stuff on this PC: it can boot only via floppy or HDD no CD boot, no Flash (no USB port in fact). At least I don't know if that's possible to burn distro on CD, boot the PC in DOS, and then somehow install that distro from CD. Especially, I really would prefer testing it before I get rid of the Windows on it - I want to be sure that it would actually recognise the CD drive and PC Card network interface. That would be very awkward, if I format HDD, somehow manage to install linux from CD, and then find out that it does not recognise the network.

So, while the 1st question, I guess, is relatively easy to answer, the 2nd question is like a puzzle: you've got one floppy, one PC that boots from floppy or hdd, but it has CD drive. It also has network PC Card. Install Linux on this device. Task for the advanced ones: avoid using floppy boot (well, because in order to create a bootable floppy I will need to find a decent floppy disc and a PC that has floppy drive).

View 8 Replies View Related

Red Hat / Fedora :: Installing RHEL On Laptop

May 3, 2010

I want to install Red Hat Enterprise Linux (v. 5 for 32-bit x86) on my Acer laptop? Is this possible? I looked on the compatibility list but it seems that I can only install this OS on a server machine? Is that true?

View 8 Replies View Related

Debian :: Installing Firmware On Laptop Without Internet?

Feb 18, 2011

i'd like to install the b43 firmware driver on my laptop without internet connection. It requires internet connection to download the firmware-b43-installer...tar.bz2. I have this tar.bz2 on my hard drive, the problem is i don't know how to make debian use that for the install, instead of trying to download it.

View 6 Replies View Related

OpenSUSE Install :: Trouble Installing On New Laptop

Apr 19, 2011

got a new laptop (well, it's 2nd hand) but it's a laptop which is the model up from mine i use suse on already. i have a HP compaq 6720s, and the new one is a HPS 6735s. i've downloaded and burned the 11.4 iso as an image but it just won't load. thought it was maybe corrupt but it works on my laptop which is already running suse. checked in the BIOS and it doesn't seem to mention boot from dvd drive, though it does say cd drive (but it's definitely a dvd drive).

is it possible to install from a usb pen drive? if so, how? fat32 won't take it, as it's too big a file, and will just putting the .iso file on there mean it'll work? what file system should i use? ntfs, ext3/4?

View 3 Replies View Related

Ubuntu Installation :: Installing 10.04 LTS ONLY, BOTH On Desktop & Laptop?

Nov 10, 2010

Plan installing Ubuntu 10.04 LTS ONLY, BOTH on my desktop & laptop.1. How do I proceed........as to how many, types, sizes, file systems of partitions.......I think would need /boot, /root, /swap, /home (on a separate partition)?2. Size of HDD are 290 GB & 100 GB respectively.3. Once partitions are created & Ubuntu installed would like to create a full back up image just in case?4. If the Linus OS files get corrupted or need a reinstall is it possible to just install it in the /root with out changing/recreating other partition structures?5. Is Ubuntu version stable enough, any advantage of any other version or 64 bit vs 32 bit, since want to install once & have a peace of mind for some time......no Linux genius just a retired old MD.6. Suggestions as to what kind of security steps to be taken & what software to use to create a full back up & where to save the backup?

View 9 Replies View Related

Ubuntu Installation :: Installing 11.04 On Laptop With Two Screens

Jun 14, 2011

I want to install and use 11.04 64bit on my laptop. My laptop's matrix is broken so I connected another monitor for it to work. Everything was fine until I updated to 11.04 from 10.04. After installing and turning on laptop, it loaded unity, and my monitor didn't turn on. Because my laptop main screen isn't working I cant check for screen or look for preferences to change.

View 2 Replies View Related

Ubuntu Installation :: Installing 10.04 64 Bit On New Dell Laptop?

Jul 19, 2011

I just purchased a new Dell Inspiron n7110 and am trying to install ubuntu 10.04 lts on it.

The issue I have is, it doesn't detect my internal nic or my wireless.

Here is the link to my specific laptop.

[URL]

View 6 Replies View Related

General :: Partitioning And Installing To Old Compaq Laptop

Nov 14, 2009

I'm new to linux and have an old laptop did clean reinstall windows 98 but no updates, and now burnt iso image to cd on other pc and used it to try running puppy linux 3.01 on the compaq armada laptop (spec 56.0MB RAM, AMD-K6(tm)-III Processor used space 645MB free 3.80GB). I chose this older version as I think I'd read that this is more suitable for older slow computers.

I am interested in running linux fully without windows 98 or with it. Running from CD I have to select Xvesa I think as Xorg didn't seem to work. Tried partitioning but in GParted find myself unable to amend the size of partitions - got yellow exclamation mark next to the partitions. What I see is: greyed out unallocated 7.38MB, then /dev/hda1 yellow exclamation mark filesystem unknown 206.72MB, /dev/hda2 yellow exclamation fat32 4.45GB.

It does not allow resizing when I try. Associated with the yellow exclamation marks is the warning "unable to read the contents of this filesystem! Because of this some operations may be unavailable. I have done a defragment of C in windows already. (Also haven't been able to connect to internet on linnux with my wireless card.)

View 2 Replies View Related

OpenSUSE Install :: Installing 11.2 On Old Sony Vaio Laptop?

Feb 3, 2010

I tried to installed OpenSUSE 11.2 "i586" on an older Sony Vaio laptop (model PCG-XG9) with 20 GB HD and 128 or 256 MB RAM. There is no ethernet port, but I have a PCMCIA WLAN card "Cabetron RoamAbout 11 Mbit/s", which should work perfectly with any Linux. The computer had Win98 on it originally (which, of course, after all installation attempts is now destroyed). The problem is that I cannot install to the end at all - no matter what I try:

1) Having the disk as a single FAT partition (made by a Win98 installation CD), it appears that the installer cannot create the correct partitions needed for Linux.

2) Having deleted the DOS partition with FDISK from Windows98 - which is like buying a completely new, unformatted HD from a store. But again, it cannot automatically set the partitions...

Is there a manual / instruction page somewhere how I should partition the disk manually (how to do it, and what sizes are recommended for each partition)?

View 1 Replies View Related

Ubuntu Installation :: Installing 10.04 To A Laptop - Alternative Method?

May 16, 2010

Currently I've got Windows XP and Ubuntu 8.04 (I believe) on my laptop, with two separate partitions.I want to format the laptop and only have Ubuntu 10.04 installed on there, but since the CD drive is broken, I've just been trying to do it from USB. There must be something wrong with my laptop/booting from USB, because I've tried two different programs used to create Live USB installations (UNetbootin and Universal-USB-Installer). Both of them load the menu, let me select to install or run the Live CD, but neither of them get past the purple-ish Ubuntu loading screen. The screen just goes black (But stays lit), and nothing else happens.

So I'm wondering if there is different, easy-ish method for installing Ubuntu 10.04 to this laptop. It's got a working network adapter,

View 9 Replies View Related

Ubuntu Installation :: Partition Resizing For Installing 11.4 On Laptop?

Jul 28, 2011

I'm installing 11.04 on a friend's laptop. I'm fairly familiar with Ubuntu, and I'm sure when I've install it previously it didn't take this long to resize the partition. It's been going for around 15 minutes. The loading cursor is still spinning, and the HDD activity light is on almost solidly, but it's been a long time with no updates. The log says only "ubuntu ntfsresize: Please make a test run using both the -n and -s options before real resizing!". Nothing appears to be happening. Is this normal? Never mind, it failed.

View 7 Replies View Related

Hardware :: Installing Memory In Compaq R3000 Laptop ?

Jan 9, 2010

I installed a 1GB PC2700 SODIMM in my Compaq R3000 Athlon 64 laptop.

I am currently running Mint 7 (32 bit), 2.6.28-11-generic.

I removed one of my two 256MB sticks and installed the new 1GB stick.

When I installed the memory, the BIOS was able to recognize it, saying I had 1.25 GB of memory.

However, Linux refused to boot.

When I did a Memtest, I got nothing - it scanned the 768k of system memory in a fraction of a second, and then rebooted. It couldn't see either my new 1GB stick or my old 256MB stick.

Did I install the wrong type of RAM? Was the stick invalid?

View 14 Replies View Related

General :: Installing Ubuntu In Pre Vista Installed Laptop?

Mar 13, 2010

got a laptop of hp with amd neo m40 pro and 2gb ram.. with vista installed.the worst OS.... i want to install linux with dual boot since am not expert in linux.these are the specs:

hard disk is 250 gb
c-155gb , d which is for recovery is 10.6gb, e-46.8gb
and an unallocated disk of 20gb

tried to install fedora which couldnt recognize the hard disk partition got ubuntu and tried.. but i dont know where it got installed now my 20 gb unallocated disk is showing as two partitions one of which is 1 gb and the rest is 18gb. how to uninstall ubuntu now. i want to repartition it and install it in proper way is 20gb enough.

View 3 Replies View Related

General :: No Sound After Installing Fedora 11 In Laptop (hp Dv3655)?

Jan 17, 2011

i buy a laptop and install fedora 11 in it but no sound after installing fedora 11 in my laptop (hp dv3655).

View 5 Replies View Related

General :: Connecting To Wifi After Installing OS On Laptop As Well As Computer?

Mar 30, 2011

ive installed ubuntu for netbook on my laptop, everything went fine, it installed ok, and it was all good, until i tried clicking on the icon im supposed to click on to get conncected to wifi. where it's supposed to have various wireless networks it says "device not ready (firmware missing)" and ive tried everything i can think of to get it working, but it wont work. the same thing happens with my desktop computer, but with ubuntu desktop 10.10 and linux mint... but with the desktop, its probably just a case of finding drivers for my specific wireless adapter, in which case can anyone tell me where i can find the driver for a belkin F6D4050ea for linux?

View 1 Replies View Related

Ubuntu Installation :: Installing To A Laptop Without Cdrom / Usb Boot Options.

Jan 23, 2010

So, I have an old laptop that used to have windows/ubuntu until the drive got fubarred (no physical damage). I shoved the laptop as side as I didn't use it much anymore (it's an old, loud 2.4GHz desktop p4 in a dell--mostly toshiba--laptop. pcmcia atheros based wifi card and an ATI m6 graphics card. Laptop was new back in 2002-03 maybe).The Cdrom drive had died a while back, and it's not worth buying a replacement. The bios doesn't support boot to USB. What are my options for getting Ubuntu on there (9.10 preferably)? The drive has been formatted already, so there is nothing to boot into right now.

I can pull the drive and hook it up to my desktop (windows 7 machine only right now) via USB, and partition it from there, but I'm not sure how to get the installer on there. The MBR of the laptop drive will also have to be rewritten. Is there a way I can create a dos partition, load it with files, and start a linux install that way (maybe with grub4dos or something)?Or can I somehow boot into an ISO image on a partition?The only other thought I have is creating a floppy disk that will allow a network boot, but I haven't looked into that. I basically just want something to bring with on vacation that I can get online with. Browsing from the phone leaves a little bit to be desired.

View 4 Replies View Related

General :: Installing Mint On An HP Laptop With Windows 7 For A Dual Boot?

Mar 9, 2010

I got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?

View 10 Replies View Related

General :: Installing Into A Laptop With Non Working Screen Using A External Monitor?

May 10, 2011

I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.

View 2 Replies View Related

Slackware :: Can't Suspend Laptop In Slack 13.37 After Installing ATI Drivers / Sort It?

May 29, 2011

I have run into the following problem, after I installed the proprietary AMD/ATI driver for my videocard I've been unable to wake up my laptop after suspend to RAM, it suspends ok (I guess?) but when I try to wake it up the screen doesn't turn on so I have to manually shut down the laptop.

before installing the proprietary driver, it worked ok

the videocard is a Radeon HD 3200, and the processor is an AMD Turion X2 Mobile

View 5 Replies View Related

Slackware :: Installing 13.37 On Old Laptop - Fdisk Does Not Recognize The Hard Drive

Jul 19, 2011

Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)

By update, I mean a complete wipe and reinstall, just to be clear.

So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.

I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?

View 11 Replies View Related

Ubuntu :: Dark Screen When Installing 10.04 - Windows XP Dell Laptop?

Oct 4, 2010

Running windows xp on dell laptop. Installed ubuntu 10.04 all was working fine. Had to format hard drive and re-install windows Xp. when trying to install ubuntu 10.04 i get a dark screen.

View 1 Replies View Related

Hardware :: Installing A (ricoh) Media Card Reader On HP Laptop With Ubuntu 9.10?

Jan 29, 2010

I have successfully installed Ubuntu 9.10 on an HP Pavilion laptop (dv6130US)Although I have not checked everything out, I believe the only hardware issue I have (so far) it getting the media card reader to work.I used the lspci command to determine if the memory card was recognized and got the following response (I've only copied what I believe to be the relative info)05:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C8321394Controller05:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)05:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)05:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)05:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)I then created a directory in /dev called mcr sudo mkdir /dev/mcrand created a directory in /media called mcrsudo mkdir /media/mcrI then tried to mount the cardreadersudo mount /dev/mcr /media/mcrbut I got the following errormount: /dev/mcr is not a block device

View 3 Replies View Related

General :: Installing Ubuntu On Lenovo Thinkpad Laptop - Won't Boot From Cd Drive

Nov 27, 2010

I've just joined the linux gang(or I am trying to) I have

-downloaded desktop/netbook edtion

-burned to dvd using infrarecord

-changed bios settings to boot from cd

-didn't work

-used the override feature that gives a bootlist at splash screen but cd drive not listed so I assume the cd is not recognised as a boot disk

-tried the usb/cd maker that comes with in the rar but its looking for the cd image...an .iso file, but I can't find one in folder.

ubuntu says I can run a trial from the cd alongside vista but when I open the executable it just offers intall, no try and if selected starts to install I think I can do the partition thing if I have to but I don't want any vista running on my machine.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved