Hardware :: Installing Memory In Compaq R3000 Laptop ?
Jan 9, 2010
I installed a 1GB PC2700 SODIMM in my Compaq R3000 Athlon 64 laptop.
I am currently running Mint 7 (32 bit), 2.6.28-11-generic.
I removed one of my two 256MB sticks and installed the new 1GB stick.
When I installed the memory, the BIOS was able to recognize it, saying I had 1.25 GB of memory.
However, Linux refused to boot.
When I did a Memtest, I got nothing - it scanned the 768k of system memory in a fraction of a second, and then rebooted. It couldn't see either my new 1GB stick or my old 256MB stick.
Did I install the wrong type of RAM? Was the stick invalid?
I'm trying to install a 1GB RAM stick into my laptop. The laptop comes with a 2x256MB setup. Only one of the sticks is physically accessible. So the maximum memory in the specs is 1.25GB. The stick is PC2700, same as the old stick. I am sure it is installed correctly. I took all static precautions. The BIOS recognizes the RAM - 1.25GB total. But Ubuntu just won't. I've got both 9.10 x64 and 9.04 x32 installed. Neither will boot. Memtest only shows the 768k of base RAM, and NONE of the extended RAM shows up - not even the initial 256MB.
I tried turning on boot logging, but the /var/logs/boot was still empty. When I turn off the splash screen, I see a whole mess of errors, which basically stem from the fact that there is no extended memory. What the hell is happening? This is the second RAM stick I've tried, so I'm pretty sure that's not the problem. I only have two days to decide whether to return it!
It started when I tried to install Kubuntu 10.10. It booted OK from the CD, but after I installed it, it wouldn't boot. It would hang showing "floppy: no floppy found". I think the next part is either initializing swap or disks. No matter what, I couldn't it to boot.
So, I installed with Xubuntu. it worked great, and booted fine a few times. Worked a couple days.
But just today, after updating to the new kernel, it won't boot at all. It gets stuck at the same place!
It does this even if I go back to the old kernel on the boot list.
When I boot into recovery mode, SOMETIMES it will boot. Actually, just once. All other times, it failed to boot even in recovery. I attached the dmesg from one of these boots.
I booted into a puppy partition, and fsck -f my other partitions. It reported no problems.
Could it be a hard drive problem? I don't hear anything from the drive, but it's getting old and I was planning on replacing it soon anyhow.
My computer is a Compaq R3000 AMD64, but I'm running the 32 bit OS.
Sorry for repeating the same old complaint but there doesn't seem to be a common fix: Wireless does not work on my Presario R3000 although SUSE 11.x lists the hardware in the Hardware Information list and the hardware is turned on. Network Manager doesn't display any wireless networks in SUSE while Win 7 can see 4 of them on the same machine. Ubuntu has no problem either
I'm new to linux and have an old laptop did clean reinstall windows 98 but no updates, and now burnt iso image to cd on other pc and used it to try running puppy linux 3.01 on the compaq armada laptop (spec 56.0MB RAM, AMD-K6(tm)-III Processor used space 645MB free 3.80GB). I chose this older version as I think I'd read that this is more suitable for older slow computers.
I am interested in running linux fully without windows 98 or with it. Running from CD I have to select Xvesa I think as Xorg didn't seem to work. Tried partitioning but in GParted find myself unable to amend the size of partitions - got yellow exclamation mark next to the partitions. What I see is: greyed out unallocated 7.38MB, then /dev/hda1 yellow exclamation mark filesystem unknown 206.72MB, /dev/hda2 yellow exclamation fat32 4.45GB.
It does not allow resizing when I try. Associated with the yellow exclamation marks is the warning "unable to read the contents of this filesystem! Because of this some operations may be unavailable. I have done a defragment of C in windows already. (Also haven't been able to connect to internet on linnux with my wireless card.)
new Compaq 510 laptop in which we installed Ubuntu 10.04. When Wireless is switched on it shows the available networks but won't connect. It connected on a few occasions but still we can't browse. The proxy settings are correct.Will installing wireless drivers help? If so, where can we find them?
I have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz Memory: 1GB ROM Date & revision: 01/07/2011, 68PVI Ver. F.09 Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors.The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue.When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens.
I got a laptop from my customer whose make/model is Compaq nx9000 business notebook. It has NIC card of 10/100 Mbps. As per my customer feedback, its was working fine but from last week it shows and connects on 10Mbps. I tried to connect the laptop with another laptop and PC as well with a crossover cable but it showing the same speed. Customer having a gigabit switch an their end, when they connect it in the network, atfirst it displays the network status in the systray that it continouly connecting and disconnecting to/from network. After couple of minutes it remains on 10 Mbps. Scan the laptop for virus using Symantec, avast, macafee etc. But still the problem persist.
For your reference the Laptops details in the below link... [url]
I've installed CENTOS 5.3 on my laptop, on dual boot with windows xp. The problem is that my wireless network manager doesn't find any networks. Another laptop with fedora 10 installed finds the network, so the problem is not the network. I guess it's a problem with the wireless driver / firmware, as i had this problem on fedora some time ago, and i've solved installing the firmware. Now i've installed the firmware, i rebooted, and it still doesn't find any network.
I'm trying to install Lubuntu 11.04 CD on a Compaq Presario M2000 Laptop to replace XP. Processor: Intel Pentium Celeron M RAM: 256mb Existing O/S XP SP3 (boots & runs but is very slow) Hard Drive 40GB (28Gb free)
Installation hangs about 1 minute after selecting language in both try Lubuntu & install Lubuntu modes. Have also left the laptop running all night to see if it was just a slow install. Have tried various other disks (Xbuntu, Puppy, Mint, Lubuntu 10.04), which have worked on other PC/laptops ok, but all stall after the language settings. Have tried burning the Lunbuntu iso with both Windows & Ubuntu at slow speeds & have verified the burnt iso. The laptop BIOS cannot be set to boot from usb, so an external CD or USB stick installation may not work? The BIOS has been updated to the latest one on the Compaq web site this morning. Although I have installed a few flavours of Linux on various hardware, I'm still a real Linux newbie. Can Lubuntu be installed within Windows, but still format the hard drive to ext2/3 ?
New member here. Was introduced to Ubuntu by the IT guy at my last place of work and liked it so much, I ran WUBI on my laptop for a couple of months before taking the plunge and today fully converting my Compaq Presario CQ56 Laptop to the full Ubuntu OS.
The only issue I have is I have no sound whatsoever. I have seen some suggestions where you should check the hardware drivers and when I do that the only driver that appears is for ATI/AMD proprietary FGLRX graphics driver. It also says this driver is active and currently in use.
So, can anyone else offer some help. I love the system and the way it does everything but it needs sound. Incidentally when I ran WUBI (while Windows 7 was on there) I did not have a problem with the sound!
I have installed openSUSE on a Compaq laptop that is approx. 10 years old. The mouse and trackpad will freeze up and a reboot is needed to fix the problem.
I cannot get wireless to work on my friends HP Compaq 6735s Laptop with Linux Mint 9. The wireless button is lit up. I can use my Desktop USB wireless adapter alright.
I am new to Linux, and have started using Ubuntu 9.10. everything seem to be in place except for the Web Cam. i think it is not being identified by my OS. i have tried Ekiga, but still of no use. i am using a Compaq Laptop with an inbuilt camera.
After having scoured the internet and the forums for advice, I am still not able to connect via Wireless, which is being controlled by Network Manager.The following is info I obtained from running a script that I obtained reading these forums:
* Hostname: linux-8qpz.site * Run date and time: Sun Oct 24 10:12:58 EDT 2010 ---------------------------------------------------
i have a hp compaq nc6220 laptop running linux mint 9 isadora. the problem is the mute button on the keyboard is orange and i have no sound at all. the volume icon at the bottom is not muted.
I have a Compaq Presario CQ60 laptop and have one of those wireless light indicators. For me the light glows orange when the wireless is OFF and blue when the wireless is ON. In Ubuntu 9.10 (Karmic) the light was always orange, even if the Wireless was on, but my wireless worked right out of the box so I was grateful for that, but since upgrading to Ubuntu 10.04 (Lucid) I've noticed that my wireless light alternates between orange and blue frequently and sometimes flashes madly when wireless activity is occurring.
I was wondering if there is a fix for this as it can get quite annoying, the light sometimes stays blue for a while but will ultimately keep going back to orange and vice-versa, my friend who also has a Compaq Presario CQ61 (Revised model of mine) has his wireless light constantly blinking orange and blue no matter what.The wireless itself works fine, I can connect to any wireless connection and use it without having to install anything else, so it does work out of the box, which again, I'm grateful for.The wireless adapter is a Atheros AR5001 Wireless network adapter. Do I need to install additional packages or drivers to get the wireless adapter to work properly?
I have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
I have a problem with installing OpenSUSE 11.3 on my server Compaq ML370 G3.4 gb memory and 6 drives, all at 36,4Gb(scsi)On the server it is the Compaq Smart Array 532 controller. When i install from the DVD, after i choose the default keyboard, the an error comes up, and it is restarting the installation process.When i use liveCD i can get to the desktop, but then evrything hangs.
I have tryed the SLES 11 SP1 and i think and as I recall i can perhaps manually the drivers to the installation.But my main question is, Is there a way to add the controller drivers in the installation prosess of OpenSUSE 11.3?
I have a HP Compaq nx9010 laptop with 1 gig of memory and 128mb being dedicated to video memory. The graphics chip is ATI Radeon IGP 345M.
I can only set my resolution to 1024 X768. If I try to change it to any other size or try to play any games, the video has millions of jerky horizontal lines going through it. If I hookup an external monitor the video works just fine. Being new to linux and even newer to installing on it laptops, can anyone tell me what if any thing can be done to correct this. I am running Ubuntu 10.4 LTS.
i tried to install ubuntu netbook remix edition 10.04 on my laptop HP Compaq 550 through a usb flash stick ... with the usb creator which included into the iso image i got this msg (( attached screen-shot )) .i tried another application which makes a usb bootable disk called "UNetbootin" it boots successfully but after booting every thing got FREEZED ... i tried the same thing with ubuntu 9.10 it's succeed .. but i neeed to install 10.04 .
I have been trying to install Ubuntu Lucid Lynx using Live CD on this machine, a compaq Presario SR5010NX, with Celeron D 3.46Ghz CPU. Bios Version American Megatrends, Inc. 5.18, 2007; 2 gigs of RAM with approx. 140 gigs of hard disk space total useable. Has Realtek High Definition audio, graphic chipset Intel 82945G family; Soft data fax modem with smart CP (internal modem). It is connected to my DSL modem/router, Netgear DGN2000, with ethernet cable (as are my other two computers).
I start the installation. Finally the desktop shows up. As soon as I start trying to navigate, my mouse freezes and that's as far as I can go.
Just out of curiosity, I also tried to use my Mint 8 CD. It did the same thing. Gets the desktop up, then freezes. I am so frustrated because I really want Ubuntu on this machine. I planned on wiping out Vista Home Basic and giving the whole thing to Ubuntu.
