Software :: Header With Custom Text On Each Page In Writer ?
Dec 15, 2010
I have a large document in two columns to which I want to add a header on each page. The problem is that headers must contain the same text, except for things like page numbers, and I want to have different text on each page.
I thought of using a frame for the header, but it would have to be inserted manually into every page.
I tried defining a pair of sections, the second with two columns, but when I put text into the second section it just overwrote the first. Even if it didn't, I suspect that the sections would have to be created for each page.
I've got the manual (all 536 pages of it) but it doesn't address my problem (or much else, for that matter). This seems such a simple requirement.
I need to know the header file used at 'c' to support openoffice writter at REDHAT4. I plan to write a c++ program for something like spellbee game. so instead of giving a txtfile which has a list of words as a source for the game I decided to use some header file. My assumptions are: Since the redhat4 is written through the "C" language and as well as the openoffice writter which is a supporting package at this os too might have the linker right. At openoffice writter we have the spellcheck feature which might had a source from where it checks the words whenever we type something at openoffice writer. So is it possible to use those header file or linkage source at my c++ spellbee game program instead off creating the list about few bunch of words.
Cannot paste URL When I middle-paste into the URL box in the Hyperlink toolbar, nothing happens. Misleading support link The support link in Help/Support shows the general Novell support page. It is not clear how to get support for OpenOffice from there (especially for openSuSE). Hyperlink toolbar button performs no action In order to place a hyperlink at the cursor, you have to click the pull-down menu by the hyperlink button on the toolbar. Clicking on the button has no effect.
I think it should be equivalent to inserting the hyperlink as text. Persistent extending hyperlink mode When you place the insertion point immediately following a hyperlink and start typing, the hyperlink text extends; there is no way to cancel that effect. In particular, in the situation when a new document contains only a hyperlink, everything you type, either in front or at the end, becomes a part of it. The only way out of this situtation is to clear the hyperlink text and press Enter; the hyperlink is then replaced with an explicit URL and you can type further without extending the hyperlink.
No apply on Close There is another undocumented button in the Standard Toolbar that opens the Hyperlink dialog box. This box behaves in a very peculiar way: when you click on the button [Close], the box closes without updating anything. In order to apply the changes you have to press [Apply] and only then [Close]. This is rather surprising (at least for me), although it is better understandable when you consider that the Hyperlink dialog box is modeless. Travelling paste Steps to reproduce:
1. Edit a long document (containing several pages). 2. Mark some text on Page 1. 3. Middle-paste the text on Page 3.
This is rather queer, as I know what I'm looking for, but I'm not sure what it is called, or whether it exists in Writer.
I'm writing a report, and I would like to have the content (index) page configured "automatically", so that it lists my headings in the rest of the document, but if I add something in the middle of what has already been written then it should pick that up and change the content page accordingly, without messing up the page numbers. It's quite a pain to make a content page by hand. I think MS Word has a tool to allow you to do this, but I don't want to use MS Word in this case for various reasons. So does anyone know what this is called and perhaps how it is done on Writer. Although, if I know what it's called, I can use the Help.
I am using OO 3.1 on Karmic 9.10. When working with Open Office Writer and either graphics or charts, a couple of things happen. First of all, the page position moves around. For example, if I click on a graphic I have inserted or on a chart, the page on my screen may shift up or down by a half inch or so. If I click back out in a text area, the page moves back to where it was. This is very annoying. Has anyone else had a problem like this? I have tried turning off compiz completely but it doesn't fix it
I was working on a text file in open office writer last night, and this morning i tried to open it and a little thing popped up saying "ASCII Filter Options," prompting me for which character set, language and default fonts I wanted to use. (only after it asked if i wanted to recover the document, which i just did since it was asking me...) Now the document, which was very important, is a scrambled bunch of random characters! I cannot find the correct character set. Why is it prompting me for which character encoding I am using in the first place?
From Gimp if I go to Page Setup and then select manage custom sizes from the page selection drop down, I can create the new page but I cannot change the name from the default of "Custom Page #". I can however go through the above steps in Firefox and that will allow me to change the name of the custom page, which will then show up in Gimp under the new name. Is this a SELinux thing?
I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
I have a Canon i560 printer, which is rather well supported by Gutenprint drivers. I have been using those for a while and they serve my regular printing needs. However, when I try to print a good quality photo on glossy photo paper, strange stuff happens.The colour doesn't come out nice, but somewhat faded. Worse, no matter how I specify that I want to make a print on 10x15 glossy paper, the actual print is always cut off, printed landscape when I specify portrait, etc. The printer is shared via CUPS and when my wife prints from her Windows XP machine, the printer works normally and the colours look brilliant so there's no problem with the machine itself, it has to be in the driver.
I googled this problem extensively and in my search, I found out that Canon does in fact have a Linux driver for this printer, though it can't be found through their website. It is on their ftp server, however: ftp://download.canon.jp/pub/driver/bj/linux/I installed the driver from there, following instructions that I found on the web and I have the printer working. But...the photo paper size that I want to print on (10x15 centimetres) isn't available in the ppd file. I can also not specify a custom paper size to print on in digikam or gwenview, since that option is greyed out...Since a ppd file is a text file, I decided to see if I could add a custom paper size. I googled some more and found this page: Adding Custom Paper Sizes to a Custom Printer File Using a Text EditorWith the help of that page, I thought I had it nailed. I added the following to my ppd file:
when I executed "man ls"...there is always colored text.I like to read "colored text"but, some color is too dark..."dark blue ???" I'don't know the exact name of color my background color is "black"
but, when I use "cscope->contrl+]" or "man 'ls' or 'someting'",there are always...very dark blue colored text.so, It is very difficult to read.if I want to change man page color..what do I do for that?I have to use "tera term.."plz, "don't say that "change your terminal program..""Except for changing utility, what else do I have to ..?
Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?
Enabling visual effects to either of normal/extra result in a serious problem-scrolling down any page results in overlapping of text, which is corrected only when i minimize and maximize the window.
I have an extremely urgent support request! I need to create a presentation by Friday. I have selected the template, the elements etc. But, I have to add transition between each text Outlines and each page. It's very easy to add page transition effects. But, so far I have not managed to add automatic custom effect in text transitions (with click).
For example, let's say that I have in page the following format: Text 1 Text 2 Text 3 I want to present the elements as Text 1, then I click the mouse, Text 2 click the mount Text 3 etc. In MS PowerPoint this is done via Master pages.
I tried the same on OO/LibreOffice 3.3: Edit the Slide Master, modified the fonts etc. Then, I tried to add a custom animation in each element. But with no success. First of all, it seems that any effect is named: Outline Text 1: Click to... Second: Even If I accept the fact than there seems to be no way to add an effect for Outline 2 etc, I save and show the presentation. But, instead of a page transition then a blank page that requires a click from me to present the 1st element, I see ALL elements. So, is it possible to do that in OO?
Can anyone help me with accomplishing the following: software writes to STDOUT --> filter --> PDF or PS "tiny text" thunbnail. Where "label" means something that fits on a biz card or smaller and remains readable. Here is an example,I want a "paper label" for data DVD media, or to include in the case with a carry-around USB drive.I can make content with ls -lh and similar utils with some post processing, but the resulting text file prints too large.A biz card has a similar form factor to a letter page only much smaller, so I need a filter of some sort.Process the text into postscript(ps) or PDF "tiny text" page thumbnail.Print this thumbnail label and store it with the media.I can also use the online page thumbnails as index into an archive or catalog.
Can some TEXT--TO--PS or TEXT--TO--PDF expert help work out how to accomplish this sort of thing?What do most people do about keeping an index or catalog of offline media (CD, DVD, USB drive) contents? (I know that "don't bother" is a popular option.)
I have installed the astercc box it is running by centos 5.2 and i want to add some text to the " login page " i dont know how its called but when i start the pc when everything is been loaded it ask for the user and password And in top of it i want add tekst there,
Strange line of text appeared on open gedit page on first use after upgrade from 10.04 t0 10.10. I was reading something and copypasting the odd bit onto a gedit note: left the room, returned to find blank page except for "nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn". Then I saw that it was just the tail-end of a longer line which had stretched the page width to max, and by deleting backwards I arrived beneath my intact notes. The line was "I[my bolding]nnnnnnnnnn...nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnby v9898". I googled v9898. And there's a v9898. com. It provides something for Windows systems.
I am interetsed in web page creation software, getting that is easy, now, I am looking at text books, classes or online tutorials. Are there any to mention?
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
On FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
i am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864
My settings are: Proportional: serif 14 Serif: Times New Roman Sans serif: Arial Monospace: Courier New 14
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
