Ubuntu :: How To Make Endnotes Appear On Bottom Of Last Page In Writer
Jul 24, 2010Does anyone know how to make endnotes appear on the bottom of the last page in Writer rather than on a new page.
View 1 RepliesDoes anyone know how to make endnotes appear on the bottom of the last page in Writer rather than on a new page.
View 1 RepliesCannot paste URL When I middle-paste into the URL box in the Hyperlink toolbar, nothing happens. Misleading support link The support link in Help/Support shows the general Novell support page. It is not clear how to get support for OpenOffice from there (especially for openSuSE). Hyperlink toolbar button performs no action In order to place a hyperlink at the cursor, you have to click the pull-down menu by the hyperlink button on the toolbar. Clicking on the button has no effect.
I think it should be equivalent to inserting the hyperlink as text. Persistent extending hyperlink mode When you place the insertion point immediately following a hyperlink and start typing, the hyperlink text extends; there is no way to cancel that effect. In particular, in the situation when a new document contains only a hyperlink, everything you type, either in front or at the end, becomes a part of it. The only way out of this situtation is to clear the hyperlink text and press Enter; the hyperlink is then replaced with an explicit URL and you can type further without extending the hyperlink.
No apply on Close There is another undocumented button in the Standard Toolbar that opens the Hyperlink dialog box. This box behaves in a very peculiar way: when you click on the button [Close], the box closes without updating anything. In order to apply the changes you have to press [Apply] and only then [Close]. This is rather surprising (at least for me), although it is better understandable when you consider that the Hyperlink dialog box is modeless. Travelling paste Steps to reproduce:
1. Edit a long document (containing several pages).
2. Mark some text on Page 1.
3. Middle-paste the text on Page 3.
Observe how you get transferred back to Page 1.
I have a large document in two columns to which I want to add a header on each page. The problem is that headers must contain the same text, except for things like page numbers, and I want to have different text on each page.
I thought of using a frame for the header, but it would have to be inserted manually into every page.
I tried defining a pair of sections, the second with two columns, but when I put text into the second section it just overwrote the first. Even if it didn't, I suspect that the sections would have to be created for each page.
I've got the manual (all 536 pages of it) but it doesn't address my problem (or much else, for that matter). This seems such a simple requirement.
FC13/KDE. when typing text in writer, when I hit the tab key it places a solid line across the page.
Is this a setting in openoffice?
This is rather queer, as I know what I'm looking for, but I'm not sure what it is called, or whether it exists in Writer.
I'm writing a report, and I would like to have the content (index) page configured "automatically", so that it lists my headings in the rest of the document, but if I add something in the middle of what has already been written then it should pick that up and change the content page accordingly, without messing up the page numbers.
It's quite a pain to make a content page by hand. I think MS Word has a tool to allow you to do this, but I don't want to use MS Word in this case for various reasons. So does anyone know what this is called and perhaps how it is done on Writer. Although, if I know what it's called, I can use the Help.
I am using OO 3.1 on Karmic 9.10. When working with Open Office Writer and either graphics or charts, a couple of things happen. First of all, the page position moves around. For example, if I click on a graphic I have inserted or on a chart, the page on my screen may shift up or down by a half inch or so. If I click back out in a text area, the page moves back to where it was. This is very annoying. Has anyone else had a problem like this? I have tried turning off compiz completely but it doesn't fix it
View 1 Replies View Relatedam using slackware 13 and want to make Open Officeriter default when I click on a document. Currently when I click on doc it opens kwrite. Similarly when I click on an audio file it opens Gxine. I prefer MPlayer.
View 2 Replies View RelatedDoes anyone have a clue as to how to make the top and bottom panels transparent in 10.4 xubuntu?
There are no options in the settings menus to set this - none that work ffor me anyhoo. And 'right clicking' on the panels does not give this option.
Maybe a command line, er, command?c
So about an hour ago I put my computer on standby. For whatever reason I couldn't bring it back so I restarted it. It works fine except now Ubuntu has pushed my display down. This means that the bottom of my tool-bar on the bottom of the screen is cut off, and there's a black bar on the top. I'm using a T.V. screen so there is no way I can manually adjust it. I also plugged my desktop back into an old monitor and it was off-center downward too.
View 1 Replies View RelatedOn computer, I have apache server, configured at port 80, running. In local network, web page is accessible by my local IP (192...). Although, when I want to get to the page from the internet, I don't know right ip address, since router's one should be local, and also, router has it's own web page running at port 80. So I guessed that my server IP would be modem's one, which I don't know. Sometime in past, I figured out address of modem too, but it has it's own application running. Also, router supports port forwarding (which I guess, is needed), but I don't know how to get using to it. what address from internet should I have? How should I determine it?
View 8 Replies View RelatedWhat command should i add into htaccess if i want to make a certain page protected with username and password?
View 1 Replies View RelatedWhen I run
convert *.jpg output.pdf
the output looks like this:
Why is the first page bigger then the others in the PDF? The original JPEGs were all the same size!
I always enjoyed the feature in Microsoft Word when in "Print Layout" where I could make the end of one page touch the beginning of the next page so the pages could be viewed seamlessly. There appears to be no way to do this in Writer Anybody know if this is possible in Writer?
As a work around I use WEb Layout to view documents. But everytime I reopen OpenOffice it defaults to Print Layout. Anybody know how to make it default to Web Layout when it is opened?
i am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864
My settings are:
Proportional: serif 14
Serif: Times New Roman
Sans serif: Arial
Monospace: Courier New 14
Can anyone tell me how to name Page up & Page down buttons in global-keybindings to use the custom commands with these buttons?
View 1 Replies View RelatedOn FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies View RelatedHow can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies View RelatedI have a problem printing to my HP printer.
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View RelatedI have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ,it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View RelatedAll has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
View 2 Replies View Relatedwanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !
View 8 Replies View RelatedI want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
Vim: substitute for Page Up and Page Down keys?
View 4 Replies View RelatedWhen I boot slackware, I have all the boot process that run but too fast. I don't have time to read what's running. Is there a way to to go page by page. I didn't find any key in my keyboard to stop and go.
View 16 Replies View RelatedHow would I share a DVD writer with an XP computer on my network?
View 1 Replies View RelatedI am having a USB DVD writer not sure in lspci output which one is pointing to that here is the complete output of lspci -vnn
Code:
Which one of the above is pointing to USB Dvd write so that I search the driver for it?
I was wondering if there is/are any software for ubuntu using which i can write ebooks? Or the only way is write it on the Word Processor and then export to PDF?
View 2 Replies View RelatedI have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.