I have a large collection of CDs that I ripped to mp3 a few years back. I would like to go sell them to a store and get some money for them (I haven't used the physical CDs in years). The deal is that when I started ripping the CDs, the program I was using would insert a 2 second delay between songs. I would like to know if there is a program/command that I can use to remove this delay between songs. Some of them have 0 delay, so songs that fade into each other sound correct. Other albums have songs that are supposed to seamlessly fade into each other, but they don't because of this delay. Is there any way to remove that delay between songs or do I have to re-rip the CD? Figuring out which albums have that problem and re-ripping the CD is going to take a very, very long time.
After GRUB 2 comes up (I'm running Ubuntu 10.10) and I choose the OS to boot, there is about a 5 second delay where nothing appears to happen after I make the selection -- no disk activity. It happens consistently every time I boot. Again, this is after I choose the OS to boot, so it shouldn't have anything to do with the standard delay to allow me to choose the appropriate OS.Is there a good way to troubleshoot this and determine what is causing the delay?
my website was recently infected with this stupid malware lotultimatebet .cn...there is a hidden iframe on almost all the 6000 pages of my site.can you please advise, if it is possible for me to remove this line from all pages by executing some command?
I'm writing a Perl script which performs linux commands.I have a directory with a load of files.
Code:exec_cmd('rm $(ls * | grep -v file1)'); This command will delete all except for file1. How can I modify this to delete all files except for file1 & file2?
I had a program run riot and it has created hundreds of spurious files in one directory. Fortunately they are all dated 4th November so are easily identified. What bash command can I use from the console to delete them all?
I want to get rid of all my useless files. It seems like my hard drive space keeps on shrinking also..& sometimes my PC freezes also..it hard to work on it.. so need a tool that can delete junks out ..
I got an external enclosure to use an old hard drive as a usb external hard drive for backing up files to.mI tried deleting all the files but there are quite a lot that cannot be deleted Nautilus saying "permission denied".
The harddrive had/has ubuntu 10.4 on it.
Do i need to delete all the files & folders from terminal? I'm running OpenSuse 11.3 in gnome. So i've got Gnome Terminal.
It turns out I caught the Linux bug. I'm now completely obsessed with it. Most of the time if I can't get something to work I do a quick web search, and I find the solution to my problem in the first link or three. This is the exception. I wanted to install XP or 2000 using Virtualbox OSE just in case I needed to look up something on Windows or print something off (can't find any drivers for my Lexmark printer). I tried XP first and it gave me an error. Then I tried 2000. At this point I went to delete the program and try again. The first thing I tried was sudo apt-get remove virtualbox. Then when I re-installed it, I still had my settings and partitions on there. I then went to the add/remove programs. Same thing after the third install. I then went to the Synaptic Package Manager and clicked completely delete files (or however it was worded). After the install it still did the same thing as the previous times. When I try and load Virtualbox it says "FATAL: No bootable medium found! System halted.". Also sometimes my pointer will get locked inside Windows. How do I get out of that? The only thing I was able to find was hit CTRL + ALT + Back and it exits both Windows and Linux.
I am connecting to a Windows 2003 server share from my Ubuntu 9.10 machine. This is not a problem & deleting normal files is fine. What I am actually trying to do is remove a virus from this server. If I have AV software running on the server it is constantly picking up the virus & eventually this kills the server. The AV software is unable to remove the virus on the server, but is able to on desktop machines.Anyway, I thought use Linux to do the job & get the AV software back on the server. No go. I get a permission denied error when trying to remove the files with rm -f "filename"Is there anyway around this? I am reluctant to start the server with the Ubuntu live CD as it is in use as a file server. If I could remove the files manually this would be good.
When I delete files from my usb flash drive on my Karmic laptop (press del key), the properties of the drive remain unchanged (available space/used space). It looks like the files/folders have been deleted, but when I go to my windows machines, the files and folders are now in a folder marked "Trash".Am I missing a step when attempting to delete the information when connected to my ubuntu laptop?
(obviously replacing the username and paths with my information)
I can connect to the remote computer however I cannot delete remote files to the recycle bin. What do I need to do in order to delete files to the recycle bin?
I'm using the command below to sync two directories. Problem is insted of deleting the files on the target directory it simply appends a ~ character at the end of the file name. Not sure why this is happening?I'd like to have all deletes on the source replicated on target.
on my site now I'm using cache and need me cron script that will delete files older than 1 hour I have feature in my kloxo control panel just need me the command .
Is there anyway to delete certain paragraphs within a text file and then insert the paragraph into another text file.I just cannot figure out how to remove the specific lines from the file and then insert them into another file at a certain line within that new file. Thanks again
I know that rm -i will prompt wether you want to delete each file.But rm -i -r will prompt for each file in each subdirectory recursively. How to make it prompt just for the directory itself, and then delete its contents without asking?How to delete all the files in a directory without deleting . and ..?How to recursively delete all tilde files in a directory?How to GUI file managers delete files to Trash? Where is this "Trash" located? Can you delete to trash in the command line?
I have a strange issue, when I run my build on my modules. GNU make keeps deleting the source *.c files from all of my modules. It says that they are intermediate files, and deletes them. I have the source files declared as such in the Makefile.
I have 2 folders that are synced using rsync. Right now if I delete a file in the source folder, the destination folder still retains that file. Is there a way to get rsync to delete files if they were deleting at the source?I could not find anything in the man page.not sure if I'm missing something or if that feature just doesn't exist.
Recently, I made a disk image of my external hard drive (as it had recently failed). I have yet to get it replaced, so I have a .dd file sitting on my computer. Now, I can mount the .dd file so I can access the files, but I cannot delete any of them. I want to be able to copy the files file by file to my normal folders and delete them from the backup file, as my disk isn't large enough for me to copy them all to the folders and just delete the entire file.
TL;DR = Can I/How do I delete individual files from a .dd backup.
I installed ubuntu 10.10 beta. But i thought it replaced ubuntu 10.04, well it did but i whiped my whole harddrive instead. Can I recover my window 7 that i once had? I accidental installed my linux using up the whole drive. i have alot of server cfg and other stuff such as pic and document.
I'm here of course because I would like to know what would be the SSH command to issue if I need to delete certain files that meet certain criteria. For instance, in this case, I simply have files that almost bear the same name but still have some very minor differences.
Let me give you an example: L0619000.log L0619001.log L0619002.log L0619003.log L0619004.log
Those in bold are those I'd like to have removed, while the "L0619004.log" is obviously to be left intact.
The privileges for root for UMESH are as below: [root@localhost media]# ll total 4 drwxr-xr-x 3 vickey root 4096 1970-01-01 05:30 UMESH [root@localhost media]#
I have connected an another hard disk to my computer and mounted its drives. when I delete the files from second hard disk it is not increasing the free space. only 1.3 GB is left on that drive of second hard disk.
We have an rsync cron job set up to mirror all the files in a "..dashtdocsdocs" folder to the same folder on another server. It copies all the files over correctly and deletes any files in the "docs" directory that aren't in the sending directory, but it also deletes any files we put in the target directory's parent folder (..dashtdocs or other subfolders like ..dashtdocsimages) even though they've been excluded in the .rsync-filter file.
So for example server A has ..dashtdocsdocs and ..dashtdocsimages. Server B has ..dashtdocsdocs but if I manually copy the images folder over to ..dashtdocsimages, the images folder gets deleted from the target directory every time rsync runs.
I'd like to keep just the docs directory synched and update other folders manually, but they keep getting deleted. It looks to me like it's running a delete-excluded option, but that option wasn't used.
Code:- '-K': Allow users to resume and upload files, but *NOT* to delete or renamethemDirectories can be removed, but only if they are empty. However,overwriting existing files is still allowed (to support upload resume) . Ifyou want to disable this too, add -r (--autorename) .This is pretty much what I want to do, but I only want this done to ONE user on the server. I have many user accounts, but only one of them I want to prevent users from issuing the "delete" command and deleting everything.
If I use PHP or SFTP to delete or replace a file while it is being served will this cause the download to fail?If so is there anything I can do about this, the concern is for large files.
