I had a program run riot and it has created hundreds of spurious files in one directory. Fortunately they are all dated 4th November so are easily identified. What bash command can I use from the console to delete them all?
View 2 RepliesThis is a continuation of the post in [URL].... . What has happened is that I have a huge log of 600 MB + and do not know from when the data is in there.
Code: Select all┌─[shirish@debian] - [~/.config/quassel-irc.org] - [9714]
└─[$] ll -h quassel-storage.sqlite
-rw------- 1 shirish shirish 647M Jun 22 21:15 quassel-storage.sqlite
So I need to know if there is a way to get just the first five or ten entries listed as one can do using head, tail etc. I did try just using head but it was unsuccessful. The second thing would be deleting some days, weeks or months data from the existing sqlite log. I did see URL... but in my case I am deleting old entries in the sqlite log and also do not know if sqlite makes backups of the data or not ?
I'm looking for a method for modifying some jpg photo files last modification date with the corresponding timestamp creation date of each file.The reason is that shotwell import pictures in folders according to last modification date which is stupid on my opinion.
View 2 Replies View Relatedmy website was recently infected with this stupid malware lotultimatebet .cn...there is a hidden iframe on almost all the 6000 pages of my site.can you please advise, if it is possible for me to remove this line from all pages by executing some command?
View 1 Replies View RelatedI'm writing a Perl script which performs linux commands.I have a directory with a load of files.
Code:exec_cmd('rm $(ls * | grep -v file1)');
This command will delete all except for file1. How can I modify this to delete all files except for file1 & file2?
I'm using the command below to sync two directories. Problem is insted of deleting the files on the target directory it simply appends a ~ character at the end of the file name. Not sure why this is happening?I'd like to have all deletes on the source replicated on target.
View 2 Replies View Relatedon my site now I'm using cache and need me cron script that will delete files older than 1 hour I have feature in my kloxo control panel just need me the command .
View 2 Replies View RelatedIs there anyway to delete certain paragraphs within a text file and then insert the paragraph into another text file.I just cannot figure out how to remove the specific lines from the file and then insert them into another file at a certain line within that new file. Thanks again
View 10 Replies View RelatedI know that rm -i will prompt wether you want to delete each file.But rm -i -r will prompt for each file in each subdirectory recursively. How to make it prompt just for the directory itself, and then delete its contents without asking?How to delete all the files in a directory without deleting . and ..?How to recursively delete all tilde files in a directory?How to GUI file managers delete files to Trash? Where is this "Trash" located? Can you delete to trash in the command line?
View 14 Replies View Related[root@localhost media]# ls UMESH
[root@localhost media]# cd UMESH/
[root@localhost UMESH]# ll
ls: cannot access ejb: Input/output error
total 0 d? ejb
[root@localhost UMESH]# rm -rf ejb
rm: cannot remove 'ejb': Input/output error
[root@localhost UMESH]# ll
ls: cannot access ejb: Input/output error
total 0 d? ejb
[root@localhost UMESH]#
The privileges for root for UMESH are as below:
[root@localhost media]# ll
total 4
drwxr-xr-x 3 vickey root 4096 1970-01-01 05:30 UMESH
[root@localhost media]#
Also I can't even paste a file in the USB.
We have an rsync cron job set up to mirror all the files in a "..dashtdocsdocs" folder to the same folder on another server. It copies all the files over correctly and deletes any files in the "docs" directory that aren't in the sending directory, but it also deletes any files we put in the target directory's parent folder (..dashtdocs or other subfolders like ..dashtdocsimages) even though they've been excluded in the .rsync-filter file.
Here's our current rsync .sh:
/usr/local/bin/rsync --stats -qPzrtpl --delete --password-file=/var/run/.appprodrsync --log-file=/export/home
/webuser/logs/rsync-extranet-log -FF /export/home/ appprodrsync@appprod::dprweb_extranet/ > /export/home/webuser/logs/rsync-extranet-output 2>&1
[code]....
So for example server A has ..dashtdocsdocs and ..dashtdocsimages. Server B has ..dashtdocsdocs but if I manually copy the images folder over to ..dashtdocsimages, the images folder gets deleted from the target directory every time rsync runs.
A: ..dashtdocsdocs
..dashtdocsimages
B: ..dashtdocsdocs
..dashtdocsimages (<-- gets deleted everytime rsync runs)
I'd like to keep just the docs directory synched and update other folders manually, but they keep getting deleted. It looks to me like it's running a delete-excluded option, but that option wasn't used.
I have a question, that may sound silly. I have removed VirtualBox from my Ubuntu install. But the .VirtualBox folder is still existing with a virtual drive of nearly 10 GB. Can I manually remove the folder .VirtualBox with rm -rf without any unwanted side effects?
View 2 Replies View Relatedhow to write a script so that when I use the 'del' command it removes/sends the files / folders to a I specify for example 'dustbin'
View 1 Replies View RelatedI copied a back up of my windows 'my documents' fold and all of its' sub folders into my linux (Mint Debian) Documents directory. I found that many of my files can be found in more that one directory so, what I want to do is to find all the dups and deal with them. Is there a good linux application to resolve this 'duplicates' problem. (I don't want to touch the linux system files.)
View 2 Replies View RelatedAfter running photorec I went from having ~30 gb of free space to having 0 bytes of free space. I have deleted all the results of photorec and various other large files and removed them from trash but it still has not freed up any space. Also, my firefox no longer has back/forward functionality which I'm sure would be fixed by a reinstall but seeing as I have 0 space, I can't really do that. Any thoughts?
View 7 Replies View RelatedIs there any way to untar and only extract those files that are above a certain date including directory structure??
I restored a backup on a play server but it was a few days old. However I have a tar archive of the entire structure that is more up to date and healthy so now I want to extract all files (including directory structure) based on a date filter on the files if possible?
I am running ubundu 10.10 and want to copy all files revised after a certain date (01.02.2011) to a certain location (usb memory stick) for backup purposes. How do I use the "cp" command, or do I have to use any other command ? Or may be this is not possible in Linux ?
View 1 Replies View Relatedls -l /tmp/empty_file*
-rw-r--r-- 1 root root 0 2010-05-30 08:00 /tmp/empty_file
-rw-r--r-- 1 root root 0 2010-05-30 12:00 /tmp/empty_file1
This looks good, the files expected to be seen are output: find /usr ( -newer /tmp/empty_file -a ! -newer /tmp/empty_file1 ) -print
But this shows me files that should not be output and likewise when I replace ls with tar it is tarring a whole bunch of stuff I do not want: find /usr ( -newer /tmp/empty_file -a ! -newer /tmp/empty_file1 ) -exec ls -l {} ;
In the end I would like to replace the "ls" with "tar cvvfp some.tar {} ;", but can't figure out what is going wrong here.
I was going to do a rsync -r -a -z -v -p -e sshto move some files frome server to another, but then realized all I really need are files which have dates starting June 1, 2008 to current. Is there a way to have rsync only sync those files?he directory structure that's my source goes all the way back to 2004.
View 5 Replies View RelatedI know find can do what I am looking for, but I am wondering if there is an alternative way to find files on the filesystem either created before/after a certain point, or at a certain time.
Typically I rely on updatedb & locate for most of my file searching needs. Issues with those tools, though, are that it only has directory and file names, and it only creates a database of local directories, not anything mounted via CIFS|NFS or via -o loop (eg, .iso images).
So if I need to find files created after yesterday across the entire system (local and remote filesystems), I am currently needing to use find.
What other tools, if any, would accomplish this in a similar fashion?
I have tried ls and grep, but that requires (in my attempts so far) multiple searches:
ls -lR | grep Aug | grep 10
ls -lR | grep Aug | grep 11
I have some basic experiencing creating simple scripts/making directories/changing permissions/etc. but I'm stumped on this one.
I have two linux boxes. I have a script set up on box 'A' to SCP into box 'B', grab a copy of a database backup and store it on box 'A'. It looks like this:
scp root@X.X.X.X:/blah/blah/blah/dump.23.gz /home/blah/DB_Backups/
I have generated a public key on box 'A' and placed it into the authorized_keys file on box 'B', so a password is not required and the file copies over successfully when the script is run. On to my problem...
I need to know what date the 'dump.23.gz' file was originally created when I'm viewing it after it's been copied to box 'A'. If I ls -l on box 'A' it only shows me the date it was created on box 'A' when it was copied.
What would I need to add to my script to append the backup's original creation date on box 'B' to the filename so that when it gets copied to box 'A' I know when the backup was created on box 'B'. I'm sure this is probably confusing. I've done lots of searching and can only find information on how to append the current date and time to a file name. I need to append it's original creation timestamp to the filename when it copies over.
I am trying to find a command which will copy all the files in the folder with extension ".log" which is created one day before the current date. By going through other threads in this forum I found the half solution to this problem
find /mnt/hd -mtime -1 -exec scp {} /mnt/usb ;
This command copying the all the files created one day before(not only *.log) to the /mnt/usb folder. what is the modification required to above command.
I currently have a command to backup a directory it will zip the directoryand place it where i have told it too, Now what i am after is a command i can run before my code, that will delete and tar.gz files before todays dateso i my ideal world it would be something like this, delete <'date +%m_%d_%y'.tar so this will delete all the files in this folder before todays date,
View 1 Replies View RelatedI need to know all files modified within a date and time range.E.g: All modified files between 20 April 2010, 1100-1200 Hrs."find / -mtime +10 ! -mtime +11" :: this i found for date but how to include time as well.
View 2 Replies View RelatedI'm trying to write a script that searches my files and lists them by date. Can someone point me in the right direction? I've been looking through the books that i have but i'm just not finding the right commands to search dates.
View 7 Replies View RelatedI wanna copy all folders and files created from 01.01.2011 until today to new placeie:cp -r /home/moviecar/public_html/wp-content/uploads/ /home/teaser/public_html/wp-content/uploads
View 4 Replies View RelatedI am trying to configure logrotate on APP/DB servers.As per my backup policy,logs will compress in daily basis and and will be moved to a Central storage device.
My tomcat generate several application logs with date extension as well as .log extension.For eg app.log,app.log.2010-10-23-14,catalina.out,catalina.2010-10-25.log etc.
Currently my tomcat logrotation /etc/logrote.d/
#cat /etc/logroate.d/tomcat/
/usr/local/tomcat/logs/*log {
[code]....
But its rotating logs only with .log extension..ie app.log.2010-10-23-14 (with date extension) is not rotating.If i put "*" instead of "*log",its rotating all files including rotated files. How can i rotate files which is having date extension.Also i dont want to keep rotated logs for more than 3 days.
I have a folder with hundreds of .txt files (logs of some java application) that I have to merge in to one single .txt file. This application produces a new log file everyday:
day1: logFriday10September2010.txt
day2: logSaturday11September2010.txt
...
day8: logFriday17September2010.txt
...
and so on...
I could merge the files easily with "cat" and ">>" however, the problem is that I have to do it by taking into account the date (creation or modification) of the file.
If I simple use the cat command the output file will receive for example, all Fridays in a row, then all Saturdays, etc. and in that way I'm not considering the date.
I've searched for the options of the find command, since the files after creation are not modified...I try to use this for example:
$ find . -newer <some old file>
but that lists me all files after that <old file> and not by correct date.
I am using the following script to creates list of accessed files.I like to add modified date and time of accessed files in the output.
For this what needs to be added in the below script??
#!/bin/bash
#
# creates list of accessed files
#
set $(date)
find /hdc160GB/programmers/projects -cmin -1440 > /hdc160GB/programmers/data/fileschanged/alert_$6-$2-$3.txt
Does deleting files using the Ubuntu One web interface delete the files stored on my computer?
View 1 Replies View Related