I use RedHat Linux 5. I install the latest Apache Httpd, 2.2.3. As I start the Httpd I got followings:
Code:
Starting httpd: httpd: Syntax error on line 210 of /etc/httpd/conf/httpd.conf: Syntax error on line 1 of /etc/httpd/conf.d/www.pb-versicherung.de-test.conf: Cannot load /etc/httpd
[code]...
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
We are using this url on our testing box and this ip is reverse proxy IP ( 10.192.64.52)
Without reverse proxy:- URL is working fine.
http://10.192.16.77/akc-qa/arsys/ser...TS000000001430
But with reverse proxy its putting escape [%25] in between %3a
[url]
Is it possible to write a rewrite rule to bypass escape [NE] for this particular URL?
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too:
[root@u15438957 ~]# yum update
Loaded plugins: fastestmirror, priorities
rpmdb: unable to join the environment
[Code]...
I get the following error, after installing and configuring httpd - it will not start any longer:
Code:
Starting httpd (via systemctl): Job failed. See system logs and 'systemctl status' for details.Where can I find the system log for this so I can post what is actually causing this?
i try update new kernel and got this error when i try to actived tun/tap
Quote:
-bash-3.2# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-164.15.1.el5.028stab068.9PAE/modules.dep: No such
[code]....
I have 4 servers:
- One is loadbalancer, installed keepalived and ipvsadm - LV1
- One is failover for loadbalancer, installed keepalived and ipvsadm too - LV2
- The other servers was installed httpd and mysqld. (RealServer)
LV1 load balancing for both httpd and mysql. And it's working fine.
VIP for http: 192.168.1.110
VIP for mysql: 192.168.1.111
Now I want to setup a website on RealServers , with URL is [url], and this website connect to mysql via VIP 192.168.1.111, this means real servers will connect to their mysql via load balancer (LV!). I tried to connect mysql via VIP from real server but it cannot.
How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?
View 5 Replies View RelatedYet another problem I have. Suse is taking a while to learn but I swear I'm getting there. Can pritty much do everything by CLI now. I'm trying to run VMware Workstation 6.5 on OpenSuse 11.2, Gnome. I had it running fine but then needed to do a system re-install and upon installation this time I get a error saying it's is Unable To Build Kernel Module and reffers me to a error log. The error log says:
Code:
Mar 14 22:07:51.420: app| Log for VMware Workstation pid=6136 version=6.5.0 build=build-118166 option=Release
[code]....
trying to install the wi-fi drivers for RaLink rt3090. How can I reset the kernel modules to default so I can try again?
View 3 Replies View RelatedAfter a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.
The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode
Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
...Then several drives show up as clean....
Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented
And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.
After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules
...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.
"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.
Regarding the module-loading features, running "lsmod" shows about 30 lines:
Module
ext3
mbcache
jbd
dm_mod
usbhid
hid
[Code] ....
...I'm at the limit of what I know to check and/or try.
I updated alsa to the latest 1.0.22, however now the alsa modules refuse to load! When I do
Code:
rcalsasound restart
I get:
Starting sound driver: hda-intelWARNING: Error inserting snd_timer (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-timer.ko): Invalid module format
WARNING: Error inserting snd_pcm (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-pcm.ko): Invalid module format
[code]....
My audio codec is IDT 92HD81B1C5 and the problem is I can't get the mic to work properly with the stock alsa.
My apache and wordpress were running fine till this morning. I ran updates via webmin,though I wasn't sure what those updates were for.
Then when I tried to access mysite.com, index.php downloads instead of opening.
I tried some troubleshooting and followed a form where it was advised to enable mod php5, so I did a2enmod php5 and tried to restart apache. Since I get this error Cannot load /usr/lib/apache2/modules/libphp5.so into server.
Code...
The problem is to get sound out of my PC. I've executed alsaconf few times and every time it generates following errors to /var/log/messages code...
Tried to get my VDR working again, but the dvb modules refuse to load code...
View 7 Replies View RelatedI have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
I was wondering how can I determine among the modules loaded at boot which of them are really necessary and which are not, in order to reduce the boot process time and have a more "elegant" system start.
I know this theme is a little bit of complicated because it depends of the user's point of view and demand a high knowledge of which things are happening in your system but I need somewhere to start improving the performance of my debian system.
When I plug in my camera via usb I see this error
Code:
load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name
This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/
How do I configure my machine to load specific modules at startup.
View 1 Replies View RelatedI have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies View RelatedI'm new to Apache configuration so could be misunderstanding but shouldn't the characters highlighted in red below be removed?
Code:
I have just configured CentOS server my new office. This is the first time I am using CentOS.
Whenever I am trying to change the webroot of the httpd server, it usually say "directory doesn't exist". whereas which can't be the case as it is home directory of the user.
To achieve this, what Do I need to do?
The second issue, I am facing that whenever I am adding new directories to public_html folder, it is not accessible. as the error page 404 is shown. I have changed the permissions to 0705 and ownership is also transferred to other user. What else is required to make new directories accessible by the web?
I get the following error while starting apache httpd
Code: httpd: Could not determine the server's fully qualified domain name, using <Server's-ip-address> for ServerName I googled it and have come across the following solutions, all of them involve changing the ServerName setting in httpd.conf:ServerName localhost ServerName www.example.com:80 ServerName <ip-address-of-server> ServerName <hostname-of-machine/FQDN>
I am setting up httpd to be accessed from over a LAN, so i don't have a .com domain name. I am thinking of going with the first option, it seems to be working...
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
I have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies View Relatedaccidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :
[root@mydomain etc]# service httpd stop
Stopping httpd: [FAILED]
[root@mydomain etc]# service httpd restart
[code]....
I would like to setup 2 linux machine each with two ethernet cards, and need to connect to two subnet e.g. 192.168.*.* and 10.0.*.* . If one linux machine out of order, the other will take over all the services(1 httpd and two named(192.168.*.1 and 10.0.0.1 as server ip). What network config is best and easy to failover to other machine?
View 1 Replies View Related