Software :: All-in-one Talk / IM / IRC Server And Client Software?
Jan 25, 2010
I am looking for some skype-like server and client software, but "free" and with the server software located on my own machine. Essentially a "free", multi operating system, multi protocol (voice, one to one chat, many to many in chatrooms, and maybe even video)I have done a search and there seem to be many possibles, but I cant see a definitive choice which ticks all the boxes.Have you seen anything which does this all-in-one communications approach?
View 1 Replies
ADVERTISEMENT
Jun 18, 2010
I'm running Ubuntu 9.10 AMD64 with KVM and several VMs running the same OS. Everything was running fine and the VMs were using the host's network via bridging. The decision was made to move the server to completely different network. I shut it down, the system was moved and hooked up, and I got it up on the new network pretty easily--just modified /etc/network/interfaces and /etc/resolv.conf. No networking problems at all.
Then I fired up virt-manager, powered up one of the VMs, and made the same kinds of changes. It's not talking beyond the VM server. I can ping the host, but can't ping the gateway. "tcpdump -i eth0" shows plenty of traffic.
View 4 Replies
View Related
Jan 25, 2010
How we edit the configuration file of talk server.
View 1 Replies
View Related
Nov 27, 2009
I am trying to setup a HP blade (BL460) server with 2 nics on sles10sp3. I want one nic to connect to a management vlan and and second to connect to the standard network. It should be possible for a desktop in the standard network to connect to either nic by providing the correct ip address.use this server as our first virtualisation hosts server using Xen. I dont want traffic used to upload / download images to the server through nic1 to effect the users traffic on the standard network on nic2. However any attempt at routing (which Im not good at) has led to the tx traffic all going out the default route (users subnet).
Each time I setup the nics via yast2 lan I can get the standard lan nic working ok. but cannot get the management nic working correctly. The server can ping a workstation on another vlan, but the workstation cannot ping the management nic. The default route appears to be forcing all traffic on the host out through this route, which I presume is normal behaviour. Using tcpdump I can see the ping packets received by the server, the server then responds through the default gateway, which the workstation does not see.
However, this normal behaviour will result in extra traffic on the users network when image downloads are initiated from the management interface.If I use a 172.24.1.0 network routed through 172.24.1.1 router setup as our management vlan , and 200.200.1.0 with router 200.200.1.1 as our lan for general users. Where server ips are nic1 10.1.1.10 and nic2 200.200.1.10 My workstation would be 200.200.1.10. If I ping the server at 10.1.1.10
I get no response. If I ping the server at 200.200.1.20 no problem.
Basically I used the network setup recommended by vmware to manage a virtual server. I actually have 4 nics, I thought by just talking about 2 nics the problem would be easier to explain. vmware specify that two nics should be used for management and two for the Lan. This is what I am trying to achieve, but both subnets must operate independently.
View 3 Replies
View Related
Dec 7, 2010
I have tripwire enterprise (not open source) agent running on one of my rhel4.8 web servers (I have actually tried with two servers with same results). The agent is a simple install rpm bin file and appears to be running as it should and the server for tripwire enterprise is set up accordingly. A windows tripwire enterprise agent is also on a windows machine that works perfectly well. But I cannot seem to get the tripwire server to talk to the agent on the red hat machine.
I can connect to port 9898 on the server, but the agent who also talks over the same port doesn't appear to be responding to the server on this port. There are no iptables set up to block the requests, there is no firewall set up (disabled) . Network team can see the packet requests being sent over the routers fine... So can't see why there would be a problem. So i reverted to the use of net cat.
Nc -l 9898 (on the agent machine)
Telnet <agent> 9898
But I get connection refused. Is there anything I could be missing here? Redhat is not my Linux of preference and it may be something obvious!
View 4 Replies
View Related
Jun 27, 2010
I need to make some C program under linux to make some scripts that can talk to my Server's Parallel port by sending some quare signal as high or low, so what i can do ?
View 4 Replies
View Related
Jun 11, 2011
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
View 6 Replies
View Related
Jun 25, 2009
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies
View Related
Jul 7, 2010
I have a firewall between two different subnets. The reason for the second subnet within the internal network is because I have a mail server that I want to protect. However, we need to make sure that the mail server can communicate with the internal network as well.
Mail server is 192.168.100.100
Firewall is 192.168.100.1 and 10.110.101.5 (and its gateway is 10.110.101.1 to the router)
I go to another workstation and ping the mail server. I can't. It times out. I do the same from the mail server. It times out as well.
View 1 Replies
View Related
Jan 27, 2016
I have read the wiki and several online tutorials and still cannot get my machines to talk to each other over NFS.Both are amd64 with Debian testing. Tutorials invoke programs that do not exist in testing, instructions are inadequate or too old.
View 10 Replies
View Related
Jan 20, 2010
How to use the TALK command in linux i.e. what is the syntax used to run the TALK command.
View 3 Replies
View Related
Nov 11, 2010
it's possible to "talk to" a website like facebook, and that's how games such as farmville have been built - i was wanting to know how this is architected, i.e. how does a website decide how to "offer up" its data to the outside world?i'd like your favourite web links, or even paper book recommendations, though i don't if those will be available or affordable over here, or, what would be especially great would be video lectures, maybe on videos?
View 4 Replies
View Related
May 3, 2011
I have installed nfs-kernel-server on the server and nfs-common on the client. Assumeserver 192.168.1.1client 192.168.1.3
content of /etc/exports is:
/home 192.168.1.0/255.255.255.0(rw,sync,no_root_squash)
/home/nfsroot 192.168.1.0/255.255.255.0(rw,no_subtree_check,async,no_root_squash)
[code]....
View 4 Replies
View Related
Apr 21, 2010
I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
View 6 Replies
View Related
Apr 23, 2010
My desktop is running 'buntu 9.10 and I have recently aquired a couple of half decent servers running Windows server 2003. I have a few windows app's that I use regularly for work that I have had limited success in running with wine or in vm's. I stumbled upon a how to to call apps in a vm to run seamlessly on the host desktop and did some playing and have succeeded in calling app's on my servers from my 'buntu desktop, the command I have set in my launcher for one of them (DIALux)
My question is, can I change the default application/file association in 'buntu with a custom command so I can double click on a file and have it open in one of these remote app's??If I can, what is the correct custom command to be using as using the above doesn't work at all, it just tries to open the file with rdesktop not the remote app.
View 1 Replies
View Related
Nov 3, 2009
I have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies
View Related
Oct 23, 2010
I'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.
what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian
View 9 Replies
View Related
Jan 12, 2011
I seem to be having an issue that started rather suddenly. when i enabled click to play in flags. i tried disabling click and play and google talk and even removing google talk and reinstalling with no luck. can someone give me an idea of what else to look for and try? I'm using Chromium 10.
View 5 Replies
View Related
Jul 17, 2011
Basically, my middle mouse button (button 2) wasn't being detected by mumble when I was trying to enter a ptt key. The button itself was bound to do some weird copy-paste function, so I figured maybe that's why, so I rebound it to Shift+Right arrow using xbindkeys and xvkbd. I then went into mumble and it detected this no problem, however due to the xbindkeys config, when I press the middle mouse button it only does the bound function once.... i.e. I press it, it sends Shift+Right arrow to the X serv, but then stops, which is obviously useless for a push-to-talk button.
So, really what I am asking is, how should I go about sorting this? Is xbindkeys able to translate a keypress in sync with the mouse button (i.e if I hold the mouse button, it holds down the keys bound to it) or am I going down the wrong route and there is a better way to get middle mouse as my push to talk button on mumble. Perhaps a different keybind software?
View 1 Replies
View Related
Feb 21, 2011
I configured an internal fake ip 192.168.1.11 on a virtual interface of my server.
I'm running one of my postfix instances on this ip.
The problem is that postfix can't talk to external hosts on the internet when running from this internal ip 192.168.1.11
I get an error in the mail log
Feb 21 22:43:00 localhost postfix-R1/smtp[11372]: connect to 7zips.com[109.169.46.199]:25: Connection timed out
It works fine when I run postfix on real ips, but I need it to work from the internal.
I thought it should just work.
Am I missing anything?
View 13 Replies
View Related
Mar 29, 2010
I have installed talk on centos, turned it on by editing xinetd.d/talk and setting disable=no.I have restarted xinetd (service xinetd restart) and verified that talk is configured to start (chkconfig --status-all).what am i missing? shouldn't either port 517 or 518 respond to telnet? what else can i do to get talk running?
View 2 Replies
View Related
Sep 28, 2010
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
View 20 Replies
View Related
May 18, 2010
I love Ubuntu and last night I wiped crappy windows 7 off my laptop and installed and customised a beautiful Ubuntu 9 OS ( I tried the new 10.04 first but it had some issues for me ). Now, up here at work we got a Domain Controller that is running windows server 2008, I need to be able to RDP into it and mess with it, I tried to use the Terminal Server Client that comes with Ubuntu, and I can see the login screen just fine, but when I try to log in it says incorrect password and wont go through.
Just to make sure it was not my account that was the issue, I went to my boss and used his computer (a MAC running OSX) and I was able to get into the same server with the same credentials, so it has something to do with my computer not my account. Do any of you have any ideas on what the problem could be?
View 5 Replies
View Related
Nov 27, 2010
I have 2 ethernet cards but when I look at the Network configuration in "Hardware Tab" I have another acx wireless network. How to delete that because In my system Idon't have wireless card..probably installed before but want delete it now.
[code]...
then windows can ping server and resolve ip address and browsing Internet but can't ping [URL]... result is Request time out. ICMP already enabled in iptables.
View 6 Replies
View Related
Jul 29, 2011
i tried to connecting from a windows7 client to a linux server through vnc server.But its very slow , is there any alternative for vnc . i heard that samba can be used as a remote desktop tool if its true please reply with configuration details.
View 2 Replies
View Related
Sep 17, 2010
I actually have a server and a client.The client must connect to the server (via internet) to access to external websites. (You can see the attachment, maybe it's more clear )My actual problem is, I have configure Squid on my server, but I want to force SSL for the connection between the client and the server.I didn't really find nice tutorials about on that, maybe someone have an idea ? Or maybe some indications ?
View 1 Replies
View Related
Jan 19, 2011
In a newly installed Linux machine which is a client machine, is not listening to NIS domain server even after setting IP address ,default gateway,and subnet mask.What are all the changes to be done in configuration file.And how can be solved
View 2 Replies
View Related
Sep 12, 2009
I have one Windows-XP on Machin 1 and one Linux on Machine 2.
I want make Linux machine as CVS server and Windows Xp as CVS client.
How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
Photo : http://img27.imageshack.us/img27/5864/cvsserver.gif
View 1 Replies
View Related
Jan 1, 2010
I have Ubuntu 9.10 trying to get yahoo voice chat to work. Thing I have tried is Gyache now everything works but I cant talk. I can hear but not talk. When I hit the talk button the program goes grey. I have wine installed with Yahelite but when I open up YahVox I get the box open and no one is in there. Ycabby does not work for so I download the three cabs and extracted the files and copped the files to the system32 folder. I tried to the mighty google but I get a whole lot of nothingness.
View 9 Replies
View Related
Feb 16, 2010
is there anyway to use cheese or ekiga to talk to someone with skype? is there anyway for a microsoft computer to use cheese or ekiga?
View 3 Replies
View Related
