I seem to be having an issue that started rather suddenly. when i enabled click to play in flags. i tried disabling click and play and google talk and even removing google talk and reinstalling with no luck. can someone give me an idea of what else to look for and try? I'm using Chromium 10.
View 5 Replies"Exaile" just crashes when you try to play and m4a song. Does anyone what what the m4a plugin is called and where I can find it? RPM would be nice too.
View 4 Replies View Relatedver since I upgraded my Fedora 10 to F11 I've noticed that the flash plugin in Firefox crashes every time I try to load some content, leaving just a grey box. When I go to Adobe's website to check the version number, it works fine. I've already tried reinstalling the plugin.
View 10 Replies View RelatedBasically, my middle mouse button (button 2) wasn't being detected by mumble when I was trying to enter a ptt key. The button itself was bound to do some weird copy-paste function, so I figured maybe that's why, so I rebound it to Shift+Right arrow using xbindkeys and xvkbd. I then went into mumble and it detected this no problem, however due to the xbindkeys config, when I press the middle mouse button it only does the bound function once.... i.e. I press it, it sends Shift+Right arrow to the X serv, but then stops, which is obviously useless for a push-to-talk button.
So, really what I am asking is, how should I go about sorting this? Is xbindkeys able to translate a keypress in sync with the mouse button (i.e if I hold the mouse button, it holds down the keys bound to it) or am I going down the wrong route and there is a better way to get middle mouse as my push to talk button on mumble. Perhaps a different keybind software?
I have installed Slackware x86_64 in my computer and everything was fine until I realized that the flash plugin didn't work well. When I want to play a video on ..... the browser crashes. I installed the flash plugin from Slackbuilds. In the Slacbuild file I just check the version and set ARCH to x86_64, What can I do?
View 15 Replies View Relatedhaving problem dealing with gnome-do, before this, I never have problem while tweeting with the tweeter plugin in gnome-do.Now, when I want to tweet up with gnome-do, the gnome-do suddenly crash and I need to open it back via Application to make it use back again.
View 4 Replies View RelatedI just updated my distribution to 11.3 from 11.2. But now this problem occurs when I try to play an mp3. There was no problem before with 11.2.
It also says
Code:
The following plugin is required : MPEG-4 AAC decoder
Only certain mp3s have this problem. All gstreamer packages have been installed. What package is missing anyway?
After update of adobe plugin to version 10.1.102.64 (10.1.r102) plugin crashes if I try to switch to full screen. Previous plugin (10.1.53.64) worked perfectly well. Anybody with the same problem? My system is System76 Gazelle, Ubuntu 8.04 with all latest updates, nvidia drivers.
Additional info:
1. Same effect in Google Chrome, which uses its own plugin 10.1.r103
2. Same effect (both in Firefox and Chrome) on Thinkpad T41 with ubuntu 8.04
I downgraded plugin to r53 for now, but it's not a good idea, last update fixed some security issues.
I use slack 13.1 64 bits on my intel i7 machine. That is I can't find a flash-player plugin that works on all browsers. The firefox crashes on open. The release of adobe 64 bits plugin simply doesn't work on any browser. I use slack 13.1 64 plus kde. Anyone knows some that works?
View 6 Replies View RelatedI just installed firefox and flash-plugin.The version of firefox is 3.0.10, package is firefox-3.0.10-1.el5.centos.The version of flash-plugin is 10.0.22.87, package is flash-plugin-10.0.22.87-1.el5.rf.But firefox crashes when there is flash in web page, unless disable flash plugin in firefox.
View 6 Replies View RelatedI have a firewall between two different subnets. The reason for the second subnet within the internal network is because I have a mail server that I want to protect. However, we need to make sure that the mail server can communicate with the internal network as well.
Mail server is 192.168.100.100
Firewall is 192.168.100.1 and 10.110.101.5 (and its gateway is 10.110.101.1 to the router)
I go to another workstation and ping the mail server. I can't. It times out. I do the same from the mail server. It times out as well.
I have read the wiki and several online tutorials and still cannot get my machines to talk to each other over NFS.Both are amd64 with Debian testing. Tutorials invoke programs that do not exist in testing, instructions are inadequate or too old.
View 10 Replies View RelatedI'm running Ubuntu 9.10 AMD64 with KVM and several VMs running the same OS. Everything was running fine and the VMs were using the host's network via bridging. The decision was made to move the server to completely different network. I shut it down, the system was moved and hooked up, and I got it up on the new network pretty easily--just modified /etc/network/interfaces and /etc/resolv.conf. No networking problems at all.
Then I fired up virt-manager, powered up one of the VMs, and made the same kinds of changes. It's not talking beyond the VM server. I can ping the host, but can't ping the gateway. "tcpdump -i eth0" shows plenty of traffic.
How to use the TALK command in linux i.e. what is the syntax used to run the TALK command.
View 3 Replies View Relatedit's possible to "talk to" a website like facebook, and that's how games such as farmville have been built - i was wanting to know how this is architected, i.e. how does a website decide how to "offer up" its data to the outside world?i'd like your favourite web links, or even paper book recommendations, though i don't if those will be available or affordable over here, or, what would be especially great would be video lectures, maybe on videos?
View 4 Replies View RelatedI configured an internal fake ip 192.168.1.11 on a virtual interface of my server.
I'm running one of my postfix instances on this ip.
The problem is that postfix can't talk to external hosts on the internet when running from this internal ip 192.168.1.11
I get an error in the mail log
Feb 21 22:43:00 localhost postfix-R1/smtp[11372]: connect to 7zips.com[109.169.46.199]:25: Connection timed out
It works fine when I run postfix on real ips, but I need it to work from the internal.
I thought it should just work.
Am I missing anything?
I have installed talk on centos, turned it on by editing xinetd.d/talk and setting disable=no.I have restarted xinetd (service xinetd restart) and verified that talk is configured to start (chkconfig --status-all).what am i missing? shouldn't either port 517 or 518 respond to telnet? what else can i do to get talk running?
View 2 Replies View RelatedI',m having trouble running the zotero openoffice integration plugin in F13 under the openjdk plugin.It's known top be not working as per The problem lies in some permissions as reported here -fedora-linux/However i want to know if there's any progress on it, since i dont have privilege to install it in my lab computer. Also i found this old bug reportwhich seems to have something done.If anypone has any idea please post, else i think i need to file a new bug report.EDIT: I'd be glad even if someone can guide me to write local policy (.java.policy) to enable the plugin
View 1 Replies View RelatedI am using openSUSE 11.0. This OS installation gives firefox 3.0.5 Beta. I had installed new version of firefox at /usr/local/bin/firefox. I had placed link of this firefox at /usr/bin using this command ->
Code:
linux-snvz:/usr/bin # ln -s /usr/local/bin/firefox/firefox firefox My older firefox contains the flush plugin. So i can easily played ..... video's in my browser. But now my new browser saying that it doesn't have flash plugin. I was tried to install flash plugin once again.
[Code]...
Even after installation also my browser is again without flash plugin.
i have this-for me huge problem- xfce4-xkb-plugin won�t save my keyboard setup and it won�t show after startup in xfce4 panel (xubuntu 9.10): I did this:
1) i added in /etc/default/console-setup needed keyboard layouts (de,hr,rs)-because i know that after restart xfce4-xkb-plugin will not memorize my layouts.
[Code]....
While using Rhythmbox this morning, I was greeted by a blunt and undiscriptive error message:
Code:
Plugin Error:Unable to activate plugin Cover Art.Going to the plugin page, I was supprised to find that most of the installed plugins would not load. Without any info being offered in the player, I looked on line. Many people had problems with other plugins, and most of the time it was a problem with an uninstalled python package. But I checked on this site and I found that I had all of these packages installed. (Well, the python ones at least, to check all of them would take forever.)
Code:
[URL]
After finding no help there, I ran rhythmbox -d to debug:
Code:
(12:04:33) [0x934fe68] [rb_python_module_init] rb-python-module.c:406: Init of python module
(rhythmbox:4971): Rhythmbox-WARNING **: unable to load module as python runtime could not be initialized
[code]....
I have Ubuntu 9.10 trying to get yahoo voice chat to work. Thing I have tried is Gyache now everything works but I cant talk. I can hear but not talk. When I hit the talk button the program goes grey. I have wine installed with Yahelite but when I open up YahVox I get the box open and no one is in there. Ycabby does not work for so I download the three cabs and extracted the files and copped the files to the system32 folder. I tried to the mighty google but I get a whole lot of nothingness.
View 9 Replies View Relatedis there anyway to use cheese or ekiga to talk to someone with skype? is there anyway for a microsoft computer to use cheese or ekiga?
View 3 Replies View RelatedI'm running 9.04, and wanted to use GMail's talk and video features. Registered with Gmail, and had to install a deb called google-talkplugin_current_i386.deb , and after installation, Gmail appeared as if it was ready/ok for a chat, talk or video.
Then I noticed the .deb was not shown under Synaptic, as a 'standard' deb, so in the interests of some 3rd party software NOT running on the computer, uninstalled it.
Went looking in Synaptic, and it does have a 'gtalk'. Is that all that is required, to run talk or video under a web browser, after logging into my GMail account ? Or, should I use Empathy ?
I would like to start a streaming audio/talk radio show where I can play music during breaks, talk most of the time about current events, and MAYBE even take callers.
I am now using Blogtalkradio, but the streaming and archiving quality os so terrible that I want to move up into creating my own talk show network.
I'm using Ubuntu 10.04, 64 bit
This is a good example of what I would like to do: The Global Reality Show...the guy uses Sam Broadcaster and pays a "stream bill" due every month, and you can download archives from a server linked to his website or click the application buttons for ways to get his stream:[url]
Now I heard of this thing called IDJC, which I have installed, but I do not have the faintest idea of how to use it, let alone get jackd running properly. It just complains and stops. Nor have I EVER used Sam Broadcaster or anything like it. When it comes to this thing, I'm a complete newbie. Other people on other forums say you can use Shoutcast and VLC and bypass Jackd and IDJC completely.
How to set up your own internet radio station in Linux? I understand its alot more complicated than windows.
I have planned to provide tech-talk on x Windows System. Any Resource where I can get detailed information regarding the same.
View 2 Replies View RelatedHow we edit the configuration file of talk server.
View 1 Replies View Relatedi want to right the on linux box which have postgresql and i what some data from the different table and put it in .csv file.
View 2 Replies View RelatedI'm an italian student that's making a project for an exam of the university.I'm trying to install a usb driver to talk with an instrument that my profalso the drivers were given by my prof. the driver now I'm trying to install is called:libhid-0.2.12.origI've opened it and I have run the programm called configure.I had the same problem of Gabyx (in a topic in the section linux Programming & Scripting) but I think I've resolved it in the same way suggested by Lakerdonald....now after I run configure appears:
Code: configure: Using db2man stylesheet: /usr/share/kde4/apps/ksgmltools2/docbook/xsl/html/docbook.xsl
configure: creating ./config.status
[code]....
I am trying to setup a HP blade (BL460) server with 2 nics on sles10sp3. I want one nic to connect to a management vlan and and second to connect to the standard network. It should be possible for a desktop in the standard network to connect to either nic by providing the correct ip address.use this server as our first virtualisation hosts server using Xen. I dont want traffic used to upload / download images to the server through nic1 to effect the users traffic on the standard network on nic2. However any attempt at routing (which Im not good at) has led to the tx traffic all going out the default route (users subnet).
Each time I setup the nics via yast2 lan I can get the standard lan nic working ok. but cannot get the management nic working correctly. The server can ping a workstation on another vlan, but the workstation cannot ping the management nic. The default route appears to be forcing all traffic on the host out through this route, which I presume is normal behaviour. Using tcpdump I can see the ping packets received by the server, the server then responds through the default gateway, which the workstation does not see.
However, this normal behaviour will result in extra traffic on the users network when image downloads are initiated from the management interface.If I use a 172.24.1.0 network routed through 172.24.1.1 router setup as our management vlan , and 200.200.1.0 with router 200.200.1.1 as our lan for general users. Where server ips are nic1 10.1.1.10 and nic2 200.200.1.10 My workstation would be 200.200.1.10. If I ping the server at 10.1.1.10
I get no response. If I ping the server at 200.200.1.20 no problem.
Basically I used the network setup recommended by vmware to manage a virtual server. I actually have 4 nics, I thought by just talking about 2 nics the problem would be easier to explain. vmware specify that two nics should be used for management and two for the Lan. This is what I am trying to achieve, but both subnets must operate independently.