Slackware :: Start Vncserver From Rc.local?
Mar 7, 2011
I'm a little new to Slackware so maybe this isn't the right way to initiate vncserver on boot, but here's what I've got. The last two lines in my rc.local are:
/usr/bin/vncserver :1 &
mount.cifs //192.168.1.99/shared /mnt/shared -o username='uname',password='passwd'
the second line runs successfully on boot, but the first line doesn't. However, after I am logged on, I can execute /etc/rc.d/rc.local and both lines will run successfully. Does the system need to be fully logged on to start the vncserver, or should I start it elsewhere other than rc.local?
View 8 Replies
ADVERTISEMENT
Jul 19, 2010
I am trying to VNC into a server to which I have no physical access (but I can ask someone to start a session or something) but can ssh into. I have gotten a VNC session working by sshing in and running vncserver, although once the VNC session died in a confusing manner.
I don't know how to start a VNC session any way but vncserver, which is odd since I'm sure that Ubuntu's Remote desktop should somehow allow me to do this by default. The server by the way is being used as a desktop by someone else. Also, how do I tell if my VNC is encrypted and if it isn't how do I make sure it is?
View 9 Replies
View Related
Jul 7, 2011
How can I start the vncserver serivce before any uesr log in? because I only have one screen now what I already did is when I log in the vncserver service going to be startup, but I want it can start before I log in. I try the "chkconfig --level 345 vncserver on" but after I reboot, I still cannot access the system before I have a log in action.
View 4 Replies
View Related
Apr 29, 2011
dear, in centos / fedora, I can config to start a permanent vnc session by setting the /etc/sysconfig/vncserver file when the system starts. Is there any similar configuration in opensuse which give me a permanent session?
View 6 Replies
View Related
Oct 10, 2010
I just happen to have a glitch with my newly rebuild slackware server. This morning everything was working fine. Then having recently setup raid arrays, I decided to try MrGoblin's rc.mdadm script to monitor the raid arrays.
I copied the rc script to rc.d & added lines in rc.local to start the script, and a line in rc.6 to stop the script when shutdown or reboot.
Now, I cant reboot neither I can shutdown...
If I issue the command "shutdown -r now", Slack execute the normal shutdown or reboot steps, unmount the local FS, turn off swap, remount the rootdev as readonly, and then I see:
Code:
Mdadm monitor not running:INIT: no more processes left in this runlevel & it stalls at this point forever...
Before the machine would have rebooted after this line. What could explain this? Now I have to hard power down or reset the machine, and of course, upon rebooting I get a REISERFS warning of unclean shutdown...
Content of the rc.local:
Code:
#!/bin/sh
#
# /etc/rc.d/rc.local: Local system initialization script.
#
# Put any local startup commands in here. Also, if you have
code....
View 2 Replies
View Related
Sep 10, 2010
I have done several attempts to build a local mirror of Salckware 13.0. There are two problems: I have to wait very long for a connection, they appear error during a connection which broke it so I have to restart. Is there any other way to build mirror? I am using Alien Bob scripts. Never before happened something like that. The connections with common web pages (google, etc) work well. Maybe I should look for some other mirror than those listed in mirror-slackware-current.sh.
[code]....
View 8 Replies
View Related
Apr 15, 2009
Recently,i'm studying around X server and client. when i was logining on and typing "init 3" on gnome-terminal in order to terminate x server.my purpose is x server starting through the command "xinit" only.and xterm to be first client for x server may be terminal.i'try typing "a bunch of commands" on tty1 (Ctrl + ALT + F1) to get through my testing .when a short command "xinit" of those without any agruments was executing, xterm was just staying instantly and disappearing soon. others i try commands,alway coming up with errors:Xterm Xt error: can't open display :%sXterm: Display is not set
View 9 Replies
View Related
Jun 13, 2011
I am using Deluge on my Debian server, for a simple auto start at boot I us the following lines in the /etc/rc.localsudo -u User delugedsudo -u User deluge-webDeluge is running after boot but i wane check if its running with User account and not as root.So I did a ps -aux | grep deluge and notice a line that root is trying to run the command sudo -U User deluge-web (i think its trying).
User 1735 1.5 1.0 187680 21604 ? Sl 16:30 0:04 /usr/bin/python /usr/bin/deluged
root 1736 0.0 0.0 20924 1168 ? S 16:30 0:00 sudo -u User deluge-web
User 1737 1.5 1.1 70400 24084 ? S 16:30 0:04 /usr/bin/python /usr/bin/deluge-web
The question is what does this mean? can i leave it running, is it better to kill it if so how to prevent that it happen on start-up.
View 6 Replies
View Related
Feb 13, 2011
I performed the first update in 4 months to my Fedora 12 Constantine. I also removed a 'dial-up' package (figured i didnt need it) and the KDE package after the update. Firefox was not getting a connection to the internet at this point. The network view showed the ethernet as inactive. Everything besides Firefox appears to work fine.
I restart machine.
It boots until right after the fedora logo fills up. At this point my dual monitors go to sleep. No response from anything. When I start in interactive mode I hit y for everything. Everything works great until libvirtd, libvirt-guest, and local. After y on all three nothing happens. I can type on the screen but no response. It just sits there. I can boot into text mode and do whatever I want. What can I do? What other information do I need to move forward?
I have looked at the Xorg.0.?? i forget what its called. I am not versed in reading the messages in it. Same for the other logs I looked at.
How I troubleshoot Linux problems: Install Linux -> Problem -> Google -> Run Command -> Didn't work? -> Start Over
View 10 Replies
View Related
Jul 5, 2011
I'm trying to use Ifolder but after the splash screen, I got this error message:
Code:
Error: Cannot start the local web services.
Error: The Simias process failed to initialize.
Use the command line switch --showconsole to view the error.
[Code]....
View 5 Replies
View Related
Nov 9, 2010
I'm trying to figure out if it's possible to configure apache or any other linux http server, to allow the visiting user to start applications installed locally on the http server and get the GUI of that application displayed in a java applet (or any other similar solution). In short, I'm looking for an alternative solution to proprietary technologies such as Citrix and Microsoft Remote Access Gateway.
View 3 Replies
View Related
Feb 20, 2010
I've setup two slackware in a Dell Inspiron 640m e in Acer Aspire One D150.
In my router the domain is "home", the two slack use wicd (dhcpcd backend) to connect. I can go in internet.
The problem is that in my router panel I can see the hostname (so dhcpcd send the right one) but they can't ping other machine in the lan (windows 2000, nas or other linux box).
Now I can't use a fixed ip (i change several networks with different routers).
I think I miss something that can ask to my router the hostname.
Anyway I was able to ping Dell.local and Acer.local with Ubuntu karmic.
View 14 Replies
View Related
Mar 30, 2011
I am currently running a VPS with Ubuntu Server 10.10. I have been trying for a few days now to get some programs to run when the system starts, but with no luck. I am trying to use rc.local to do this, there is an:
/etc/init.d/rc.local - http://paste.monsterprojects.org/mpbjhwhbjzhbjrr (Was already on the system, I have not edited this)
and:
/etc/rc.local - http://paste.monsterprojects.org/mpbjhwhbkkkhwez
If i run the /etc/rc.local script manually all the programs start fine, and if i run /etc/init.d/rc.local start, all the programs start fine. But for some reason they just don't seem to be starting when the system boots.
View 3 Replies
View Related
Sep 22, 2010
I have a problem with my slackware 13.1 that is that i can�t access it outside my local network. It�s running behind a router and i have activated the DMZ to my slackware computer i can access the web with my slackware computer but i can�t get access to it outside my LAN.
View 8 Replies
View Related
May 26, 2010
Using Slackware 12.0 32-bit. KDE KDE 4.2.4.When I choose the Menu (Kickoff Application Launcher)then choose Development, and then 'Emacs' I get the version of emacs that came with the distribution.
It is at /usr/bin
In the meantime, I have installed a compiled version of emacs that is installed at /usr/local/bin.
How do I modify Slack so that the App launcher launches /usr/local/bin/emacs?
View 2 Replies
View Related
Jun 1, 2010
Having both a /usr and /usr/local partition seems logical: A seperate partition for /usr would preserve the /root partition since it changes in size, while reducing the initial install size of /root. Having a /usr/local partition would then preserve custom software (ie. scribus, bender etc.)not distro related, scripts, and settings.
Would having /usr and /usr/local create any problems locating files? I understand that /usr/local has a relative function depending on whether it is being used as a machine in a network context or whether it is being used as a desktop and /usr/local refers to user custom files. I am setting up slackware64 multilib and think I want to preserve both distro and user files to expedite do overs keep trouble shooting clean.
View 14 Replies
View Related
Feb 26, 2011
What would be the easiest way to synchronize a local folder of images, recursively through sub-folders, with a remote folder of images over FTP?
View 7 Replies
View Related
Aug 1, 2011
I have tried different methods to auto start wpa_supplicant at boot on Ubuntu Lucid server on a laptop which can't be connected to Ethernet.
The only thing that worked is adding the wpa_supplicant command before exit0 in rc.local. It solve my problem of wpa_supplicant auto start and annoyance on not be able to ssh before local login. But the screen stuck at Ubuntu Logo. How can i get pass Ubuntu logo screen to regular tty or xbmc in future?
[URL]
View 1 Replies
View Related
May 19, 2010
Recently i've upgraded my fedora 11 to 12 using the preupgrade command and now I have a problem booting! when i start the interactive boot it hangs after trying to run the service local, it looks as if its trying to boot because the cursor blinks really fast then blinks normally after a few seconds. no error was stated during the event. what seems to be the problem here?
View 3 Replies
View Related
Dec 31, 2010
I have a slack 64 13.1 box, that I want to be able to control the monitor of from my laptop. Here's the scenario: I can already control the music remotely via X forwarding banshee to my laptop (banshee shows up on the laptop and music comes out on the desktop). Now I want to be able to open a movie on the desktop's display via the laptop.
Now googling this comes up with solutions for X forwarding, but I don't want it to forward X I want it to display on the desktop.
View 3 Replies
View Related
Dec 2, 2010
Each time I'm moving my new files and directories from my local slackware PC to my NAS (Linux based) in the LAN.
This NAS is 24/7 online and I can access it from the net.More than that it's backed up every day.
I was thinking of making my home directory directly in this NAS.
I didn't made a separate partition for my Home during the installation of slackware in the PC.
View 6 Replies
View Related
May 14, 2011
when I installed 13.37 I created a local copy of the entire stable tree (source/ and all the rest) just to have all that stuff around to browse offline.
Now, to instruct myself, I'm trying to use rsync to keep this stuff up to date. But I seem either to have misread the rsync man page or ... well, I don't know. I am issuing the following command and getting the results seen below:
Code:
View 3 Replies
View Related
May 19, 2010
I was wondering if anyone could recommend a way a very lightweight MTA without network capabilities just for receiving local administration emails?I know I could restrict access, I was just wondering if there was something more lightweight designed purely for local use.
View 2 Replies
View Related
Feb 10, 2010
I know there has to be an easier way to do this than to download each file individually. On an ftp site I would just use
PHP Code...
But with those files being on an HTTP server and wget not supporting HTTP file globbing I'm at a loss.
What is a one step method to recursively download all files in a directory on an HTTP server?
View 5 Replies
View Related
Feb 9, 2011
I used the cmd "vncserver" to start a vnc session, and it created a log file like this "/root/.vnc/linux-vzra:2.log". As time going on, the file "/root/.vnc/linux-vzra:2.log" became bigger and bigger, it is too huge indeed. How can I start a vnc session without a log file?
View 1 Replies
View Related
May 12, 2011
I just set up my firewall, and now I can't see any Samba workgroups. It says it can't find any workgroups on my local network, and it may be caused by a firewall. It is a firewall issue because if I disable my firewall, I can see the workgroup. What do I need to open on my firewall to see the workgroup? I am using Slackware64 13.37.
Here is how I set up my firewall.
Code:
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -s 127.0.0.0/8 -d 127.0.0.0/8 -i lo -j ACCEPT
iptables -A INPUT -p icmp -j ACCEPT
I got the commands from here url.
View 5 Replies
View Related
Jan 8, 2010
I'm running a server that boots into runlevel 3. I can ssh into it but I only get a blank screen when I try to connect to the vncserver that's running on it. Is it possible to connect to a vncserver that's running on runlevel 3 or does X have to be running for the vnc to work?
View 1 Replies
View Related
Jul 29, 2010
I'm new to Linux. I'm trying to install the VNCserver using SSH connection in a remote pc with Fedora 13. I would like to access the Gnome through remote connection. I did the setup Iptables freeing ports 5901 and 5902. Also set up vncserver and user. The user "aquiles" is a user of the system and also the vncserver. The problem is that I am not able to start the service. I think that seen anything related to Perl. Displays the following error:
[Root @ sinahome ~] # service vncserver start
Starting VNC server: 1: aquiles/usr/bin/env: perl: No such file or directory
[FAILED]
The file /etc/sysconfig/vncservers
Vncservers = "1: aquiles'
VNCSERVERARGS [1] = "-geometry 800x600-depth 16"
[root@sinahome ~] # iptables - list
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT tcp - anywhere anywhere tcp dpt: ftp
ACCEPT tcp - anywhere anywhere tcp dpt: vnc-server
ACCEPT tcp - anywhere anywhere tcp dpt: https
ACCEPT tcp - anywhere anywhere tcp dpt: http
ACCEPT tcp - anywhere anywhere tcp dpt: ssh
ACCEPT all - anywhere anywhere state RELATED, Estaba LISHED
ACCEPT icmp - anywhere anywhere
ACCEPT all - anywhere anywhere
ACCEPT tcp - anywhere anywhere state NEW tcp dpt: s sh
REJECT all - anywhere anywhere reject-with icmp-ho st-Prohibited
ACCEPT all - anywhere anywhere state RELATED, Estaba LISHED
ACCEPT tcp - anywhere anywhere tcp PTPs: commplex-m ain: targus-getdata
ACCEPT tcp - anywhere anywhere state NEW tcp PTPs: 5901:5902
Chain FORWARD (policy ACCEPT)
target prot opt source destination
REJECT all - anywhere anywhere reject-with icmp-ho st-Prohibited
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
View 7 Replies
View Related
Feb 25, 2011
Hi all,
how can I make vncserver starts on boot?
Realvnc was installed by "apt-get install vnc-server" command.
There in NO start-stop script in /etc/init.d/ (is it ok? ), so I can't use update-rc.d. When placing
vncserver
or
/bin/bash -c "cd /root/ && vncserver :1" 2> /tmp/vncstart &
in rc.local it starts nothing but "vncpasswd //.vnc/passwd" (and YES, there is password in /root/.vnc/passwd)
Please, help!
View 3 Replies
View Related
May 21, 2009
I am currently using FC10 on a Dell 4600 with 2GB of ram. I love Linux as it is the most stable OS around. My end goal is to have the machine boot and start the vncserver automatically, eventually using an ssh tunnel to make it secure. My main problem is the vncserver is not starting on boot, I must login as a user then it works great. the error I get is
[Code]....
Basically what happens is the vncserver fails on boot however, if I login to the Fedora box I am able to connect and I get the GDM login screen. I have read many, many posts but have not been able to get over the boot issue. I really want to make this a headless box I can put in another room so I have more room for my musical gear.
View 1 Replies
View Related
