Slackware :: Set Conky To Load At Startup?
Nov 9, 2010How to set conky to load at startup?
View 11 RepliesHow to set conky to load at startup?
View 11 Repliesmy Conky needed the Coretemp, and a friend of LQ told me to run modprobe, and it works greate! no every time I start my system, I need to run the modprobe to add the module to Kernel. How can I put the coretemp to start every startup? (I think there is somenthing to do with a file on the rc.module at /etc/rc.d/, but I'm afraid to do something stupid...) I want to make the conky running after start of the system. How can I do this?
View 2 Replies View RelatedThe program "qtconfig" does not load saved config on startup.
I just installed slackware-current from today's update (mirrored from ftp.slackware.com). The program "qtconfig" seems to have saved my changes to "~/.config/Trolltech.conf". However, after restarting qtconfig all options become the defaults.
I verified this in both the C locale and a UTF-8 locale.
Another computer of mine has a -current system from a few months ago and doesn't have this problem.
Im trying to get Conky to run at startup. I created a file called conky_start.sh in etc/init.d that looks like this:
Code:
#!/bin/sh
### Starts up Conky ###
sleep 30 && conky
Then did this to get it into startup:
[Code]....
As the title implies, I have fluxbox and conky running in Karmic. The problem is getting conky to start at startup. Below is my ~/.fluxbox/startup file. I have searched and tried everything I have found to get it to work. Conky works beautifully when I run it manually. Anyway, here is my startup file:
Code:
#!/bin/sh
xmodmap "/home/doug/.Xmodmap"
unclutter -idle 2 &
conky &
exec fluxbox -log "/home/doug/.fluxbox/log"
Lines added before and after the conky line run perfectly. Unclutter runs, but no conky.
I want conky to run at startup. I put an entry in startup applications but when it starts it covers everything (see attached image). I can fix it (i.e. moving a window over it covers conky) by running killall conky && conky , but I don't want to have to do that all the time.
I suspect the problem has to do with the window type, but don't know how to fix it. Also, I don't want to lose sight of the icons/files on the desktop.
Here's my conky.rc:
I have one error with a skin conky. When i execute a conky it display a error
Code:
rm: no se puede borrar �/home/said/.tonky/notify/oncal�: No existe el fichero o el directorio
rm: no se puede borrar �/home/said/.tonky/notify/oncpu�: No existe el fichero o el directorio
rm: no se puede borrar �/home/said/.tonky/notify/onmem�: No existe el fichero o el directorio
[code]....
I think, that error can be because i have a smaller display.
I'm having trouble getting conky to boot friendly-like with the gwm. If I just set conky as a start up program, it floats above other windows, it seems to have loaded before the desktop actually did. So I googled it and found that many people use the conky shell scripts to make it sleep until the desktop load. I created one, made it executable, and restarted to see the effect and found that conky never launched at all (not visible, no running process).
Here is my startup shell script for conky:
Code:
#!/bin/bash
sleep 10 && conky;
This is how it should look if working properly. If I launch conky after login, it looks like this every time. [URL]. This is how it looks if I simply set it to open upon startup with no script. [URL]. If I try to open it with the script, I simply never see anything in conkys place. It seems like the script never executes. I've tried setting longer and shorter sleep times, but I never see so much as a single instance of conky running.
I am trying to run a script that runs at startup. I have followed directions found at this Website: [URL]. Everything works except the script which consists of two lines.
#!/bin/bash
sleep 30 && conky ;
I changed the file permissions to be executed and named it .conky-startup.sh.
Then I went to System>Preferences>Startup Applications and created a new entry that points to my script file. When I restarted my system, Conky didn't start. If I try to run the file from Nautilus or the Terminal, nothing happens.
Conky does not start during start up.I used this script, It has execute permission also!But it did not start! What is the problem!It works manually when i run that script!
Note: It is not working in the background also at startup as i checked it -When is run killall conky it showed No such process
I have conky running a simple script on my Ubuntu 11.04 install. Running conky from using ALT-F2 is fine, but I have have conky added to the startup list, and when it runs from this, the conky window is different (ie not integrated with desktop layer). It has some shadowing around the edge and it seems to be on a layer other than the desktop. In addition to this, it stops running after a short while. I then run conky from ALT-F2 again and it's appears as I want, and stays there all day. I have included what I think is the relevant code below from my conkyrc. Has anyone had similar issues with a suitable way to resolve the problem?
Code:
own_window yes
own_window_transparent yes
own_window_type override
#own_window_type desktop
#own_window_type normal
#
own_window_type conky
own_window_class Conky
I'm trying to install conky on my Slackware. I've downloaded the files from slackbuilds.org (both conky and lua). I've compiled and installed lua writing "make linux" and "sudo make install", but when I'm trying to compile conky, it says:
Code:
No package 'lua5.1' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
[code]....
I just installed conky. What is the best way to get it to start when X loads? I am using KDE.
View 3 Replies View RelatedIs there a way to tell conky on which display to start. I have dual twin monitor setup and its starting on my secondary monitor.
View 10 Replies View RelatedI've installed the conky on my slack 13.1.
So, I get a script on the internet, and get this line error:
platform coretemp.1 temp 1
And I get the follwing error:
Code:
So, I see my output os acpitool and the Thermal Info is not available.
Do you know what can I do to get the Temperature of my CPU?
Is there a way to make conky stay behind my active windows?
View 1 Replies View RelatedIn the past I've been using the work around with feh to grab a copy of the image used for the background in KDE, however with the upgrade to Slackware 13.1 / KDE 4.4.3 this no longer happens.
View 14 Replies View RelatedI've trying to compile conky 1.7.2 in slack 13 with lua-cairo and lua-imlib2 bindings, have lua 5.1.4 installed and also installed tolua++-1.0.93 from der site installed it through scons..
here's my config_linux.py
Code:
## This is the linux configuration file
# This file was adapted to be used with ArchLinux
# Use 'scons -h' to see the list of command line options available
# Compiler flags (based on ArchLinux's installation of lua)
#LINKFLAGS = ['-g']
CCFLAGS = ['-O2', '-ansi', '-Wall' ]
[Code]...
I run my conky as one bar at the top of the screen (Ratpoison). It is frustrating when % values jump between 0->10% for example and then the entire bar shifts. How can I make it display 000% 010% 100%?
View 7 Replies View RelatedI thought I would try out Eric's KDE 4.5.1 and Robby's new Xorg pacakges. The upgrade went off with out a hitch, but now when I try to launch conky I get
conky: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory
So I rebuilt conky and reinstalled libmowgli ran ldconfig but I still get the error.
I am trying to build conky from SlackBuilds.org using sbopkg, but the build fails every single time. It may be worth noting that I am trying to build with extra options, namely --disable-x11 --disable-xdamage --disable-own-window --disable-xft.
This is so I can have a cli-only conky that I can pipe to my status bar. This has worked in the past, but now the build is failing with a seemingly unrelated error.
It states:
Code:
At the end of the build. I tried removing the option --enable-audacious, but that only resulted in an error which complained that yet another option (--enable-rss=yes) was a "Command not found". This continues as I remove options. I would like to keep many of those options active as I have a need for certain features.
This is a copy of the SlackBuild being used:
Code:
I have a full install of Slackware64 v13.1, so audacious is installed. I don't know what else could be going wrong, and I don't know why this worked in the past.
Doing some research I found that in conky 1.8.1 there is support for nvidia using libxnvctrl. I am trying to compile it but I am missing libxnvctrl. Does any body know where I can get it?
View 5 Replies View RelatedI have conky installed and set up as a startup application, however everytime I log out and back in conky creates itself as a new window:
How can I get conky to start normally without having to do a manual restart everytime I login?
This works on my Slackware64 13.1 using KDE 4.4.4, Conky version 1.8.0. This is a simple .conkyrc tweak that doesn't need feh, it doesn't have the distracting faun shadow-border and most importantly, it doesn't disappear when you click your desktop (On my system anyway). These are the relevant sections to edit:
Code:
own_window_colour black
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_transparent yes
own_window_argb_130
own_window_type override
own_window yes
I found that getting rid of the own_window_argb_values yes suggested in other fixes and replacing it with a specific alpha and then changing window type to override solved all my issues. I've noticed no bugs or strange happenings. This seems to be a common problem with a lot of workaround solutions. I think this is a much more elegant way. Edit: Not persistant... After 2 reboots it's back to normal.
Said that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
When I turn on the computer, the Grub2 shows up and asks me to choose what OS to start. And from today on, whatever I choose, I end up with nothing. When Linux (Ubuntu) is chosen, then the blinking logo is shown (depicting it's loading) and after some time I can only see a black screen. In case when Windows is chosen, the black screen appears immediately. Kive cd works fine but don't know what I could do with it. A week ago I changed a booting order in my BIOS, so that GRUB2 is loading very fast now. Then I also chose: sudo dkpg-reconfigure grub-pc and selected the disk that had my boot partition. For a week or so it worked fine.
View 9 Replies View RelatedI rebooted my computer and noticed the aoe module didn't loadad to do a modprobe aoe)What's the proper way to have this start at boot time? (rather than something like doing a modprobe aoe in the rc.local
View 1 Replies View RelatedI edited some file in /etc and it stopped loading, but after upgrading to natty it loads again. I'm already starting X manually from /etc/event.d/tty7, but the X started from gdm is the one I see on the screen. I don't have a keyboard, so I can't switch to the console with the right X after startup. Is the only option to deinstall gdm, or is there a way to make it not start?
View 2 Replies View RelatedI just installed Opensuse 11.2, and have come across the following error upon bootup: the display manager screen refuses to load, unless I type STARTX at the cli line. the error messages read: failed services in runlevel 5 /etc/init.d/xdm.orig start returned 6 earlyxdm postfix Further, I am unable to activate the xdm service under Yast. Has anyone else run across this error? Not sure how to resolve.
View 9 Replies View Relatedin Maxima package "solve_rat_ineq.mac" there's the omonyomus function that solves inequations. Now my question is: how do I tell maxima to load it automatically, command
[code]...
I tried to find out but I failed.