Slackware :: Ndiswrapper Will Not Build On -current?
Oct 17, 2010here is the compiler output when i try to build the slackware package
[Code]...
ADVERTISEMENT
Slackware :: Build Gbrainy For X64 13.1 / Current Without GSB?
Aug 18, 2010Has anyone successfully build Gbrainy for Slackware x64 13.1/Current?
View 2 Replies View RelatedSlackware :: Build Fails In Current: Gtkimageview-1.6.4?
Feb 14, 2010I can not get gtkimageview-1.6.4 to build in current. It fails with a number of errors of type:
Code:
gtkanimview.c: In function 'gtk_anim_view_get_type':
/usr/include/glib-2.0/glib/gthread.h:339: error: dereferencing pointer 'value_location.1' does break strict-aliasing rules
/usr/include/glib-2.0/glib/gthread.h:339: note: initialized from here
Slackware :: Upgraded Current Now Cannot Build Slackbuilds?
Oct 16, 2010this is what i get when i try to compile ndiswrapper:
checking for a BSD-compatible install... /bin/ginstall -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
[Code]...
Slackware :: Install The I386 Build On One Partition And The 64-bit Build On Another
Sep 16, 2010Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
Ubuntu :: Delete The Old Build Without Affecting The Current One Using?
Dec 22, 2010Since updating my ubuntu a little while ago, i have more than one linux build on my grub menu.
Is it possible to delete the old build without affecting the current one i'm using?
Ubuntu Installation :: Install Current Daily Build Of 10.10 - Burn Newer Version?
Oct 3, 2010If I were to install the current daily build of 10.10 (cd) will there be a live update that can be installed on Oct 10? Or do I need to burn the newer 10.10 version on that day and install again by cd?
View 2 Replies View RelatedSlackware :: Netgear WG311v3 Ndiswrapper Failure?
Feb 14, 2011I've gone through tutorial after tutorial and finally I've given up and I'm resorting to asking the forums. I've got Slackware 13.1 64-bit and I've got a Netgear WG311v3 and I obviously want them to work together! I installed ndiswrapper and I've tried several different drivers from several different tutorials, but I can't get them to work. At first I couldn't get modprobe ndiswrapper to work, but that was because ndiswrapper.ko was in the wrong folder. I moved it manually and executed depmod -a and modprobe ndiswrapper started working.I've gathered all the information I anticipated and I'm going to post it at the end of this. Anything I don't supply that is relevant ask for and I'll try and get it. I'm desperate to get this driver working correctly so I can get back to my life on Slackware. Here's the information:
[Code]...
Slackware :: Slackware 13.1 Build Package Net-snmp With LmSensors Support?
Nov 17, 2010I downloaded from http://ftp.nluug.nl/os/Linux/distr/s...ce/n/net-snmp/ source and I build new package and works ok no errors. If I change net-snmp.SlackBuild and add CFLAGS --with-mib-modules=ucd-snmp/lmSensors --with-ldflags=-lsensors while I need lmsensors support in net-snmp. But the package compiling ends with error:
[Code]...
Ubuntu :: Error Inserting Ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper
Dec 18, 2010I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
Slackware :: Build Several Packages Designed For Slackware 13 At Slackbuilds?
Jan 24, 2010I tried to build several packages designed for slackware 13 at slackbuilds. Those was a simple apps like ardour, audacity for example.
[Code]...
My CPU is AMD Phenom 9550 Quad core. It supports 64 bit. My os is slackware 13_64. What do I need to change in slackbuild to create a txz package for those apps?
Slackware :: Lost Wireless Keybord And Mouse Upgrading Slackware Current
Oct 24, 2010Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedFedora Networking :: 14 X64 Ndiswrapper Modprobe Ndiswrapper Module Not Found?
Jan 28, 2011i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View RelatedSlackware :: Alfa Awus036h Slackware Current Dhcpcd Won't Connect
Feb 5, 2011slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
Slackware :: Image / Icon Trouble After Slackware-current Upgrade
Jan 22, 2010I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies View RelatedSlackware :: Slackware Current Installpkg Line 59 Rev Command Not Found
Feb 28, 2011First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
Slackware :: Slackware Current 64 Bit Wine Sound - Error: Alsa:ALSA_CheckSetVolume Could Not Find '{PCM,Line} Playback Volume' Element
Mar 22, 2011after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
Slackware :: Can't Boot Updated Kernel Slackware Current
Jan 5, 2010I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedSlackware :: Graphics Not Loading After Upgrading To Slackware-Current
Feb 26, 2011I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies View RelatedSlackware :: How Should Proprietary ATI Driver Be Installed On Slackware Current 64-bit?
May 15, 2010I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies View RelatedSlackware :: Unable To Excludes.txt And Mirror-slackware-current.sh
Feb 1, 2011I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
Slackware :: Slackware Current Freezes At Splash Screen / Fix It?
Mar 16, 2011I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies View RelatedSlackware :: Chatzilla Add-on In Seamonkey In Slackware-current?
Mar 22, 2011This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
Slackware :: Building Mumble 1.2.2 On Slackware - Current 64?
Jan 10, 2011I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
Slackware :: How To Do A 'fresh Install' Using Slackware -current
Mar 25, 2011I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies View RelatedSlackware :: Slackware Current KDE 4.5.5 Desktop Upside Down?
Feb 21, 2011i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies View RelatedSlackware :: X11 Mouse Frozen In Slackware-current?
Feb 25, 2011I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies View RelatedSlackware :: VLC Build For 13.37 X64?
May 9, 2011Is there a VLC build for 13.37 x64? I tried Alien's 13.1 build, but the sound was missing.
View 2 Replies View RelatedSlackware :: Take Current Windows7 (x64) Setup And Make It Into A Dual-boot Setup With Slackware 13.0?
Jan 24, 2010I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
Slackware :: Build FreeCad And K-3d ?
Apr 3, 2010I have been trying to build FreeCad and k-3d for Slackware......not much luck...
FreeCad has two build systems... automake and cmake, both fail despite the fact that dependencies are installed...cmake build system fails at about 80% complaining that it cannot find
Quote:
I guess the build system is broken...About K-3d, the thing builds alright..had to install libsig++ glibmm cairomm pangomm and gtkmm as dependencies...
The thing actually builds but when i try to make the installable package, I have to use trackinstall -i="make -i install", but the installable package fails to launch because it cannot find stuff in /usr/share/