Slackware :: Exist - Support For Gma500
Oct 10, 2010exist in slackware? or something? i dont want to use ubuntu
View 2 Replies
ADVERTISEMENT
Slackware :: Gma500 Poulsbo Driver
Jan 3, 2011why doesnt work in slackware? i have no skills to try it, or to do some packages. but......its posible?
Pat? Rob? Eric? God?
why i cant do to use slackware in my asus eeepc1201ha??
Slackware :: Install Poulsbo Driver GMA500
Jul 6, 2010I installed Slackware Linux 13.1 on my Dell Inspiron Mini1010. The description is
[Code]....
and the "lspci | grep VGA" command shows this 00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07)
Fedora :: ErrorC/C++ Template File '/home/perlsyntax/.vim/c-support/templates/Templates' Does Not Exist?
Feb 14, 2011I try to install C support and it get this errorC/C++ template file '/home/perlsyntax/.vim/c-support/templates/Templates' does not exist or is not readableI get that after i make the dir ~/.vim and ~/.vim/plugin i put c support in my ~/.vim/plugin anyone know why i get the error message for on fedora?---------- Post added at 08:06 AM ---------- Previous post was at 07:24 AM -------------------- Post added at 01:12 PM ---------- Previous post was at 08:06 AM -------------------- Post added at 09:02 PM ---------- Previous post was at 01:12 PM ----------[/COLOR]Anyone out there?
View 2 Replies View RelatedUbuntu Multimedia :: MacPro1.1 Realtek ALC889A - Support Exist For The MacPro1,1's Front Headphone Port Yet?
Jul 12, 2011Does support exist for the MacPro1,1's front headphone port yet? Strangely I cannot get either of the rear analog audio ports to work either. I have tried setting
options snd-hda-intel model=imac24
options snd-hda-intel model=macpro
options snd-hda-intel model=auto
and totally removing the line of the alsa-base.conf file. I restarted after each of these tests. Only the imac24 option does anything, activating the front speaker, but none of the 1/8" analog ports work then. I run Ubuntu exclusively on this box, so I would really love to get some sort of output other than the internal speaker working. Ideally this would be the front headphones jack, but I am not too picky.
[Code]...
Slackware :: X Broken: .serverauth Does Not Exist?
Nov 17, 2010I upgraded to qt 4.7.1 and it broke X. So I reverted to the older version of qt, and x is still broken! when I run startx I get the following error:
Code:
xauth: file /(user)/.serverauth.2474 does not exist
.
Slackware :: Installed Multilib Support In 64bit Slackware 13.37 Installation?
Jun 28, 2011I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 Replies View RelatedSlackware :: Slackware 13.1 Build Package Net-snmp With LmSensors Support?
Nov 17, 2010I downloaded from http://ftp.nluug.nl/os/Linux/distr/s...ce/n/net-snmp/ source and I build new package and works ok no errors. If I change net-snmp.SlackBuild and add CFLAGS --with-mib-modules=ucd-snmp/lmSensors --with-ldflags=-lsensors while I need lmsensors support in net-snmp. But the package compiling ends with error:
[Code]...
General :: Slackware 13 Sessions Command Doesn't Exist?
May 24, 2010I'm running Slackware 13 - xfce4 and I got a new session in background. How could I see that session and use it? In backtrack I'm doing it via sessions in terminal but im Slackware 13 session command doesn't exist.
View 2 Replies View RelatedSlackware :: Kdestartupconfig4 Does Not Exist Or Fails - Error Code Is 127?
Nov 21, 2010I got a problem with my Slackware installation after upgrading to slackware-current. I made a clean 13.1 install on my laptop, then I logged in as root, connected to the net and upgraded to slackware-current. Then, after rebooting, I try to log in to kde as root but I get this error:
Code:
kdestartupconfig4 does not exist or fails. The error code is 127. Check your installation. After getting these errors, I made a completely new fresh installation but I got the same errors again.
I even added another user with the adduser command just in case that was the problem but that didn't help. I can't log in to KDE.
Ubuntu Multimedia :: Installing GMA500 Drivers On WEBS 1010
Apr 3, 2010I have a portwell WEBS1010 mini PC [URL] which I tried to install ubuntu 9.10 on. It contains the cursed GMA500 chipset and supposed to be similar to all the other devices containing it I tried everything there is, all the posts and methods
[URL]
all getting the same results, some of them are installing fine but when I reboot, I get an error message from X telling me there was an error and I can only move to low-graphics mode.
Ubuntu Multimedia :: 9.04 Install GMA500 Driver But Run In Low-graphics Mode
May 18, 2010Our BIOS use AMI,Memory:1GB,CPU:Z510,
then install ubuntu 9.04,GMA500 Driver,but refer Inf is:
The following error was encountered. You may need to update your configuration to solve this;
(EE) psb(0):THE STOLENbASE IS :OX1FC00000
(EE) psb(0):Screenindex is:0;
fbphys is :0x1fc00000;fbsize is:0x003bf000
(EE) Psb(0):Could not find a valid initial configuration for this screen;
(EE) screen(s) found, but none have a usable configuration;
, then I try to modify the Stolen Memory to 8MB,but result no change; I doubt BIOS need do some change ,but don't know how to do,
Slackware :: How Much Support Does Slackware Have For Drivers
Jan 8, 2010How much support does Slackware have for drivers?I have an Asus motherboard, and the onboard sound doesn't work with Ubuntu, and also it won't recognize my HP printer.Would I have better luck with Slackware?
View 4 Replies View RelatedSlackware :: Length Of Support For Slackware?
Jun 8, 2011I am trying to convince the "higher ups" in a small office of about 15 users about migrating from windows to Slackware, one question I have is how long after a release are security updates available? I subscribe to the security mailing list and often see updates that go as far back as Slackware 8.0. What would the safe number be? 5 years, 10 years? Longer? Any input would help me with my cause of eliminating windows all together.
View 9 Replies View RelatedDebian Hardware :: Wheezy - GMA500 Black Screen After Loading Ramdisk
Aug 21, 2013I have just installed Debian Wheezy on an E6XX Intel platform and after loading ramdisk, the screen goes black and I cannot use the system.
*) In the beginning, I tried to pass "nomodeset" in Grub, but after loading ramdisk, it tries to change screen's resolution and it goes blank.
*) gma500 output in dmesg can be seen in [1] at the bottom of this page.
*) I tried passing "GRUB_GFXMODE=640x480
GRUB_GFXPAYLOAD_LINUX=640x480" + update-grub, but it keeps failing.
*) I examined EDI's monitor output through "sudo get-edid |sudo parse-edid" (see [2] below), it seems that it is not possible to get the EDID information from the screen correctly. However, I am using this screen with xrandr with Debian Squeeze and I have no problems.
>>>>>>>>>>>>>>>>> [1] dmesg about "gma500"
[ 10.164297] gma500 0000:00:02.0: setting latency timer to 64
[ 10.164325] gma500 0000:00:02.0: Enabling MSI failed!
[ 10.164923] [drm] internal display is MIPI display
[ 10.167632] gma500 0000:00:02.0: VBT signature missing
[ 10.167828] Stolen memory information
[ 10.167840] base in RAM: 0x3f800000
[Code] ....
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
parse-edid: IO error reading EDID
Ubuntu Installation :: After Upgrades Netbook Boots To Black Screen - Gma500
Oct 2, 2010Well, it's a long story, but to make it short I foolishly upgraded my wife's netbook many months ago to 10.04, not knowing that the new xserver version will cause me lots of grief with the gma500 driver. Back then, I ran an update that completely borked my system, and my only fix was to do another clean install. Since the, I just did not do any more upgrades.
So, months have gone by, and the netbook has not had any upgrades. I've read some instructions in the gma500 megathread on how to safely upgrade the system. To start, I had to purge the psb-kernel-source, do upgrades, and reinstall the psb-kernel-source and the other poulsbo drivers. I did all that, and now it boots to a black screen. I can't ctrl-alt-f1 to a terminal session either.
I really don't want to do another clean install. With the crappy broadcom driver as well, it's a real chore. And because of the crappy broadcom driver, I can't figure any way to get a wifi connection from the command line either.
Slackware :: 13.37 - AMD Does Not Support GPU Anymore
Jun 16, 2011Desktop effects were working until a resume from suspend failed. After that, it says that desktop effects cannot be enabled due to a technical issue, but it does not say what that issue is, it is not the same dialogue box that says check your X config file, it says it directly in the settings menu. I tried deleting ~/.kde/share/config/kwinrc, but it only works once. If I log out and then back in, KDE freezes while loading, forcing me to ctrl + alt + backspace to kill X.
After that, I can log back in, but desktop effects don't work and when I go to enable them I see the same error, and it won't let me. My graphics card is an ATI Radeon X1950PRO. AMD does not support that GPU anymore and the drivers are too old for them to work on Slackware64 13.37. This means I am using the open-source drivers that come with Slackware64 13.37. I just found out that desktop effects are causing the resume from suspend to fail.
Slackware :: Php 5.2.9 - Reconfigure To Support Gd?
Sep 22, 2010i'm newbie here.when i try to use gd in my web application,it says that i didn't install gd support.howto install php gd support to my existing php installation? i use php 5.2.9 for slackware.
Code:
PHP Version 5.2.9
System :Linux jbendkck1 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686
[code]...
Slackware :: Virtualbox Usb On 13.1 - No USB Support
Dec 29, 2010I downgraded a computer a couple of weeks ago from -current to 13.1. At that point in time the USB support in my Virtualbox stopped working. Since then I have installed Virtualbox on my wife's laptop, which also runs 13.1, and the USB support doesn't work there either. So I tried it on yet another 13.1 box that I have lying around no USB support. Then I upgraded the latter box to -current and USB works! Given that sequence of events, I'm pretty sure this is a Slackware 13.1 problem rather than a Virtualbox problem. what might be causing this?
View 8 Replies View RelatedSlackware :: When Does Official Support For 12.2 End
Apr 23, 2010Just wondering as I couldn't find anything regarding when official slackware support ends for 12.2?
And, does that assume that sbopkg support for 12.2 would also end at same time?
Slackware :: 13.1 RC1 Still Compiled For 486 Support?
May 16, 2010I read this on Patrick's twitter: Considering compiling future 32-bit x86 Slackware packages for i686 and finally leaving i486 and i586 support behind. Would the devs mind sharing why the change hasn't been made? I'm guessing there must be a lot of Slackware users with 15-20 year old computers that want to run the latest software.
View 14 Replies View RelatedSlackware :: Shared Lib Or MP3 Support In All Programs?
Nov 7, 2010A few days ago I tried out Fedora 14, but it didn't really live long. However, I have now Slackware on my netbook again. While I was trying Fedora I installed Clementine and I had to install an extra mp3 lib (I installed Fluendo MP3) to enable mp3 support. On my main machine I have also installed Slackware and Clementine and I can play mp3, so I ponder where's Slackware's mp3 lib? I egrep'ed /var/log/packages for "mp3" but I couldn't find any appropriate. Does Slackware use a shared mp3 lib or is the mp3 support in all the programs?
View 2 Replies View RelatedSlackware :: Is There Ati Radeon Hd 6970 Support
Mar 28, 2011Im planning to get ati radeon hd 6970. Wonder if theres available xf86-video driver support for it rather than official ati catalyst driver? and what are your expirience with it?
View 3 Replies View RelatedSlackware :: KDE Has Been Build Without Zeroconf Support?
Aug 2, 2010Work I've got 2 slackware 13.1 64 machines, and they work just fine: Basic installation, everything ' bog standard 'When in Dolphin or Konqueror, I can ' click ' on Network Services and all the other MS Window machines pop-up.
@Home I've got 2 slackware 13.1 64 machines, they don't work fine. Basic installation, everything ' bog standard '. When in Dolphin or Konqueror, I can 'click' on Network Services and 'KDE has been build without Zeroconf support' pops up in Konqueror or is displayed in Dolpin..
Is it my netwerk @ Home (with an old Windows Server in it) or is something missing in the installation? Under MS windows (from within a virtualbox, brigded network) both machines can browse the network just perfectly: I even got a XP machine 'joined' in the domain on the windows server). Clueless since a google on the error + slackware give me Zero. Zeroconf in the slackware forum give me some midly related
Slackware :: No ACPI Support In Kernel
Jul 8, 2011I use Slackware 13.37 32-bit version on ThinkPad X60s. I compiled two Window Maker dockable applications monitoring the processor temperature, fan speed, and battery status: wmpower (see: [URL]) and wmlenovo (see: [URL]). Both these applications refuse to work.
wmpower displays the messages:
Code:
CPU frequency scaling available
No power management subsystem detected
No power management support...
wmlenovo displays the message:
Code:
No ACPI support in kernel
Did I missed something obvious during the configuration of the system and ACPI doesn't work for me or there's some more serious problem with my system?
Slackware :: 13.37 Have Printer Support If So Which Desktop?
Jul 3, 2011Dose Slackware 13.37 have printer support if so which desktop?
View 3 Replies View RelatedSlackware :: Huge-smp Kernel Does Not Support More Than 4G Of RAM
Nov 15, 2010I am a long time (1.something) slackware user and maintainer of a mirror site.I'm suddenly having problems with my favorite distro. (1) I've been mainly running Slackware64. When I was experiencing recent problems on a Slackware (32) 13.1 system, I discovered the huge-smp kernel does not support more than 4G of RAM. This is an obvious bug, and I am shocked that there is no fix out yet. Surely I can't be the only Slackware 32 user with >4G of RAM. I've verified it on a 12G i7 system and an 8G Athlon64-X2 system.
View 4 Replies View RelatedSlackware :: Building Mesa-7.8.1 With Osmesa Support?
May 28, 2011I'm using Slackware 13.1, just messing around with some stuff before I upgrade to 13.37. I really want to get a decent build of Desmume working, but the 3D engine for it requires OSMesa to be enabled. I've removed the initial Mesa package that I installed from the Slackware DVD and I'm trying to recompile mesa-7.8.1 so that OSMesa is available for the system. However, I keep running into problems.
Code:
./configure --enable-gl-osmesa
When I run those options for the configure command and compile it, Mesa builds alright and gives me a working libGL just fine. It also gives me libOSMesa. Yet, when I compile Desmume to specifically use OSMesa, its configure script says that it can't find OSMesa at all. But running ldconfig -p, the output shows libOSMesa.so in /usr/lib. The symlink is up to date too, and I've recreated it several times.
Code:
./configure --with-driver=osmesa
When I build Mesa using these configure options, I don't get libGL (well, that's expected, the manual says as much will happen). But apparently libOSMesa is installed just fine. When I went to compile Desmume, no gripes about OSMesa, but Desmume needs both libGL and OSMesa to work properly.
So my question is, how can I install Mesa so that I have OpenGL and OSMesa working together? I've been able to get one working, but not both. I don't know how to get OpenGL on Slackware without using the Mesa package, but the package isn't cooperating. I'm on Intel graphics too.
Slackware :: Can't Build Jack 0.118 With Alsa Support On 12.2
Jan 16, 2010Whatever option i specify with ./configure, the summary says :
jack-audio-connection-kit 0.118.0 :
| Build with ALSA support............................... : false
i tried --enable-alsa without success.
Slackware :: Can't Compile Postgresql With Kerberos Support
Dec 15, 2010I built kerberos, and added --with-krb5 to the postgresql build. It failed with this error : configure: error: could not find function 'krb5_sendauth' required for Kerberos 5
View 5 Replies View Related
