Slackware :: Can't Figure Out How To Get Wireless Working?
Feb 4, 2010
Ok, so I've been researching this like all day because I can't figure out how to get my wireless working on Slackware (and that's the only way I can get internet on my laptop here). So, when I run uname -a it tells me I am running kernel 2.6.29.6 According to http://intellinuxwireless.org/?p=iwlwifi since I have a Intel� PRO/Wireless 3945ABG Network Connection adapter the iwlwifi driver included with Slackware and the released drivers will not work.
So, I "need to use the compat-wireless project that retrieves the latest driver development code from the upstream repository." Problem #1 - I can't access the repository from Slackware without my wireless. Problem #2 - I have no idea how to get the files I need / configure my system to use them from my other OS (I am triple-booting Windows 7, Linux Mint, and Slackware). So, I THINK once I get the driver installed for my wireless it should be easy enough. I've already become pretty familiar with rc.inet1.conf from trying to get it to work so far, so if all I need to do after this is mess with that then I should be fine.explain if/how I can get the right driver set up in Slackware? I can access my Slackware partition from my other distro no problem.
so I know this is probably one of the most asked questions from Slackware noobs, but i can't seem to find an acceptable answer to this question. How to get wireless networking, working under Slackware linux.I know the tools i should be using(ifconfig, iwconfig) but I have no idea how to use them. I know the init script that I need to edit but I'm not to sure where to get the information it requires, such as the ESSID.I am running 13.1 64bit. I know that the wireless network I want to connect to uses WPA encryption.As well I have never used Slackware before, I've had the most experience with CrunchBang, the problem being wireless worked out of the box for that.
I installed slackware 13.1 (64) but I didn't install kde because I am using fluxbox. Now I would like to install k3b. I have gslapt installed but there are no dependencies listed. The k3b website says that kde is a requirement but that can't be true. find the dependencies of the official slackware package. The slackware book does not seem to have that information.
If I was writing a SlackBuild that repackages a precompiled binary, how would I know if it was i{3,4,5,6}86?Or should I just assume i386 unless it says otherwise?Just wondering how the people at SlackBuilds.org figure this out.
I used to have my print server with cups in openSUSE 11.1 and it used to work perfect. I was able to print from both linux machines and windows. But since I Installed openSUSE 11.2, I'm only able to print from linux machines. In windows XP I'am able to find the printer and install the drivers, and everything seems to work, but when I send the print command, it creates an error. I have three XP pcs that were running perfectly, and now neither one of them print, so I know is a problem with the server itself. I have all the samba and cups services activated, and the firewall is set correctly, but can't figure out why it is working with linux machines and not with windows.
Looking at getting a new laptop for some of the guys in my office, but trying to figure out if any of these wireless cards will be supported by the kernel, hoping not to do any serious kernel hacking to get them working. The cards are
I am attempting to setup wireless in Slackware 13.37 for the first time and while I found a lot of guides I am still unable to connect to my router without starting X and using wicd. I'll post my rc.inet1.conf and rc.wireless.conf along with wireless-settings.conf from wicd. wireless-settings.conf
I'm running Slack 12 on a Thinkpad T60 and my wireless has stopped connecting to my wireless network at home. I'm using wicd for network management and it was working up until yesterday. I don't know what to do to track down the problem, so I'm looking for advice to do so.Other wireless devices in the house can still connect, so I don't believe my router is the problem.
After doing a reconfigure of my wrt54gl router, trying to activate WEP encryption, and then finding WICD wouldn't connect, and returning to the original config on the router, now wicd won't reconnect the wireless card. Here's the wicd.log entry from the attempt to connect:
Code: 2010/01/30 18:40:46 :: ifconfig wlan0 up 2010/01/30 18:40:46 :: iwlist wlan0 scan 2010/01/30 18:40:47 :: ifconfig eth0 2010/01/30 18:40:47 :: 2010/01/30 18:40:47 :: {} 2010/01/30 18:40:47 :: hidden 2010/01/30 18:40:48 :: scanning done 2010/01/30 18:40:48 :: found 4 networks: 2010/01/30 18:40:48 :: found use_settings_globally in configuration 1 2010/01/30 18:40:48 :: found afterscript in configuration None .....
I think I can eliminate Media Companion as the problem since all other samba servers work with it.
I want to trouble shoot this but don't even know where to start. How do I figure out what makes OPENWRT samba server different from the other 100% working FREENAS and PC-01 Servers?
I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4
Code:
bash-4.1# ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
I recently bought the Alfa AWUS036h which uses the Realtek rtl8187 chipset. I am able to load the module and connect to any network, but its almost as soon as I try to load a page the connection drops. It never stays connected for more than 30 seconds. My other computers using the same adapter in the same spot work fine, unfortunately there not running slackware. I've tried compiling the newest stable kernel and checked the rd.inet1.conf settings.
Has anyone managed to get the moonlight extension which enables one to watch Sky TV working in slackware? I have the extensions for firefox and chrome but all I get is a blank screen.
I do have trouble in configuring my wireless network,though i configured it as what Alien BOB say(http://alien.slackbook.org/dokuwiki/...ckware:network) and google some similar Threads.My latop is Asus F83vf, wireless card is Atheros AR9285 Wireless Network Adapter. The code when I run lspci command is code...
I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61) Subsystem: Intel Corporation Device 1000 Flags: bus master, fast devsel, latency 0, IRQ 29 Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
i read the sticky post on here about how to try and get my wireless card working.
i have installed opensuse 11.4 i followed step 1 of post and got following: /usr/bin/lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
My openSUSE's working unstable and very slowly! Wireless is starting very late.It appears 10min later after i loggen in,and wants me to enter wireless password.This windows is showing up so late,and I can't connect internet before it shows up.
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
The wireless on my 64-bit openSUSE-11.2 installed on my Dell Studio 1537 laptop stopped working some time back (possibly more than a one or two months back). I just discovered this last week when on business. I have not used the wireless under openSUSE-11.2 for a while so I am not certain what broke it, but I am suspicious of an update. I note openSUSE-11.3 milestone-7 works great with the wireless (on a liveCD). I note possibly two related threads, although I note no failed request for firmware in my case:request for firmware file 'iwlwifi-5000-2.ucode' failed [INTEL 5300 AGN] [OPENSUSE 11.2] - openSUSE Forums, and I see another thread here: Suddenly No Wireless Network Card - openSUSE Forums... but I can not tell if what I have is the same problem, so I did not add to those threads. In my case I can scan for the network, and see the SSID. An ip address is assigned. But a ping does not work.
Some details, the wireless is:
Code:
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection [8086:4235] Subsystem: Intel Corporation Device [8086:1121] Kernel driver in use: iwlagn In terms of installed apps:
I know the router wireless network is good, because I can connect to the router via wireless with another laptop (old Fujitsu-Siemens Amilo 7400M with older Intel wireless), and the router wireless also works with this Dell Studio 1537 PC (with same hardware) but with openSUSE-11.3 milestone7 version.
I have Lenovo G550 and openSUSE 11.4. Everything's ok, wifi without problems, I could connect to anywhere I wanted to, but yesterday while laptop was running and was connected actually by wire to internet, after removing the wire I realized that I cannot connect to wifi (the laptop was hibernated during night) - even the light diode in the front of the laptop was not shining. I went to yast and realized that the wlan0 isn't enabled and there's new eth1 port. But the wlan by ifup I cannot start and the eth1 I cannot start as well.
I have a strange problem with my laptop and need your help in resolving it...i am using a Dell Studio XPS 1645..i have got everything working except the wireless.. and the real problem here is that the wlan detects the network but does not connect to it and will keep on looping back and forward doing the same thing again and again..I am using Opensuse 11.4 with Gnome 3 Shell..here is details of the commands that i tried using to fix the issue
