I have 13.0 64 with alien's multilib packages.
Adobe Acrobat has stopped working. If I try it from the command line I get
Quote:
./acroread: No such file or directory
I have tried re-installing but there is no difference and the file is clearly there. Is it possible a recent upgrade of a slackware patch might have caused this?
On a Debian system, I installed Adobe Acrobat Reader using the Linux binary (AdbeRdr9.4.2-1_i486linux_enu.bin) downloaded from Adobe's website. I realized there's a way to install it from a Debian package as opposed to Adobe's binary (and be able to keep up better with security updates), so I want to remove Adobe's version and install the Debian package. What's the right way to uninstall Reader when it was installed this way?
View 5 Replies View RelatedWhere has the Adobe Acrobat (A.K.A acroread) been hidden? It was in the parters repository on Lucid.
Before that you could get it from Medibuntu.
Now I can't find it on 10.10.
System: Intel E5400 "Intel 64 Architecture for 64-bit Computing"
Fedora: F14: 32-bit version from OSDisc.com
uname gives the following:
Linux localhost1.localdomain 2.6.35.11-83.fc14.i686 #1 SMP Mon Feb 7 07:04:18 UTC 2011 i686 i686 i386 GNU/Linux
Firefox: 3.6.15 using yum
Adobe Reader 9.4.2.02/11/2011 using yum from "adobe-linux-i386" repository
Plugin listed as: Adobe Reader 9.4: nswrapper_32_32.nppdf.so
Since a week or two, clicking a link to a pdf file will not load in Firefox. I tried removing Adobe Reader and reinstalling it. Then the pdf files loaded, but now again they will not load. It just stopped working! No error messages.
Debian 5.0 32bit
Iceweasel 3.0.6
On browsing a document on a website it popup;Adobe Acrobat Reader 5.0 (with Asian Font pack installed) or above is required for viewing this document. Please install the required software. I couldn't find its package is on repo
Adobe Reader: [URL]
Which package shall I download? Where shall I retain the package to install so that it can be detected on browsing?
When I run the Acrobat Pro installer, it does its little unpacking thing, takes about 5 minutes to get all the way through, and at 99.something% I get this error:
[URL]
I've tried several times, always the same result. And it happens even with no other programs running under wine.
Is their a program in ubuntu that can match adobe acrobat 9 pro extended?Or what is the best ubuntu PDF program, that can allow the most features seen in adobe acrobat 9 pro extended.
View 1 Replies View RelatedFedora 12 64bit
Firefox 3.5.6
On browsing a document on a website it popup;
Code:
Adobe Acrobat Reader 5.0 (with Asian Font pack installed) or above is required for viewing this document. Please install the required software.PDFescape Extension 0.13 is already installed but it can't work. Neither its package is on repo..However I can't find 64bit version on;Pls advise whether I can't download 32bit version instead? If YES where shall I retain the package to install so that it can be detected on browsing?
Fedora 12 64bit
Firefox 3.5.6
On browsing a document on a website it popup;
Code:
Adobe Acrobat Reader 5.0 (with Asian Font pack installed) or above is required for viewing this document. Please install the required software.
PDFescape Extension 0.13 is already installed but it can't work. Neither its package is on repo. However I can't find 64bit version on:
Adobe Reader [URL]
Whether I can't download 32bit version instead? If YES where shall I retain the package to install so that it can be detected on browsing?
i have mandriva, and i can download progams such as the newest version of mandriva, the latest version of firefox, the latest version of flash player or acrobat. but when i try to open and run them i can't. it's to the point where videos no longer supports my old browser or flash player, and it's to the point where i can't load myspace because it tells me i need a new browser, so i download it, but it doesn't do anything.
View 1 Replies View RelatedOn a Debian system, I installed Adobe Acrobat Reader using the Linux binary (AdbeRdr9.4.2 1_i486linux_enu.bin) downloaded from Adobe's website. What's the right way to uninstall Reader when it was installed this way?
View 1 Replies View RelatedThis isn't exactly a Linux question, because it also happens with the Windows version, but I've got a pdf file with a number of images in it. When I try to copy the image, it works except the pasted image is just a blank rectangle.I've tried this with The Gimp on Linux and Windows, Photoshop Elements on Windows, and some other programs. I get similar results from all of them. Sometimes the rectangle is transparent, sometimes black, but never the image I've selected. However the rectangle does appear to be the size of the selected image, so something is being picked up.
View 6 Replies View RelatedMy USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies View RelatedYesterday I used slackupdate.sh [0.7.3] from darklinux.net to update Slackware 13.1, 32 bit version. I got Firefox 3.6.6, installed it, moved the libflashplayer.so to the new plugins directory. Now I can't play utube videos. about: plugins says that flashplayer is installed and working. Grabbed flash from Adobe website, overwrote the existing one, still no joy. Asked in the Firefox user forum. Answer 'same thing happen to me -- Windows Vista' ...I'm not an advanced user. So, is this a Slackware problem, an Adobe problem, or a Firefox problem? I'm asking here because y'all are more likely to point me to a solution. I've always been able to grab the Linux version of Flash from Adobe website and install it
View 7 Replies View RelatedI'm on Firefox 3.6.11 with Flash 10.2 d161 on Slackware 13.1 32-bit. Hulu stopped working sometime this past week. (Actually when it stopped working I was still on the previous versions of Firefox and Flash - I upgraded 3.6.10 to 3.6.11 to see if it would help.) Worked fine before that. I've tried Firefox safe-mode, disabling add-ons and using default theme and none of this matters. Flash works fine and Hulu worked fine before a week ago.
View 5 Replies View RelatedWith Firefox 3.6 from the official repository, and the flash-player-plugin from Slacky.eu installed here. It's worked fine up until now, where websites either claim it's not installed, or show a blank box instead.NoScript is installed on my Firefox, but given that on fully trusted pages (of which there are very few) it still happens, and nothing else blocks Flash besides AdBlock and Firefox's own settings (both checked too) I suspect the plugin.I also tried downloading direct from Adobe, and plonking the libflashplayer.so in /usr/lib / mozilla/plugins and making a backup of the original one (The one provided from Slacky's package) but to no avail.So it seems to be the plugin, but for inexplicable reasons.Would anyone happen to be able to explicate this inexplicability?
View 12 Replies View RelatedSetting up my slackware system for prime use, i downloaded robby's xfce 4.8 package and upgraded xfce 4.6. Later i downloaded slackpkg and upgraded all my packages for the first time. When i did a restart, xfce 4.8 had gone back to xfce 4.6. I just went back to the directory where i was storing all the xfce 4.8 files and did the upgrade again, it worked; now for some reason though my terminal emulator no longer works, as regular user and root. I get an eroor saying, failed to execute terminal emulator. Input/output error.
View 3 Replies View RelatedI'm running Slack 12 on a Thinkpad T60 and my wireless has stopped connecting to my wireless network at home. I'm using wicd for network management and it was working up until yesterday. I don't know what to do to track down the problem, so I'm looking for advice to do so.Other wireless devices in the house can still connect, so I don't believe my router is the problem.
View 6 Replies View RelatedWhen I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
View 1 Replies View RelatedAfter updating my system today, sound stopped working. VLC said I should update alsa-lib. Slackbuilds had none to offer, so I got the sources from http://www.alsa-project.org/main/index.php/Main_Page. It compiled and installed without problems, but the error from VLC states the same. Is my system the only one affected by the update, and how do I fix it?
View 4 Replies View RelatedAfter doing a reconfigure of my wrt54gl router, trying to activate WEP encryption, and then finding WICD wouldn't connect, and returning to the original config on the router, now wicd won't reconnect the wireless card. Here's the wicd.log entry from the attempt to connect:
Code:
2010/01/30 18:40:46 :: ifconfig wlan0 up
2010/01/30 18:40:46 :: iwlist wlan0 scan
2010/01/30 18:40:47 :: ifconfig eth0
2010/01/30 18:40:47 ::
2010/01/30 18:40:47 :: {}
2010/01/30 18:40:47 :: hidden
2010/01/30 18:40:48 :: scanning done
2010/01/30 18:40:48 :: found 4 networks:
2010/01/30 18:40:48 :: found use_settings_globally in configuration 1
2010/01/30 18:40:48 :: found afterscript in configuration None .....
Kuser no longer works for 'rob' but still works for 'robert' & 'root'. It launches (i.e. the cursor bounces up & down and a Kuser box appears in the task bar) but the Kuser screen never opens. Finally, the bouncing cursor disappears as well as the Kuser box in the task bar.
View 1 Replies View RelatedI have had my computer set to dual boot Windows 7 for months now with no issue. Now today when I logged on to Slackware (13.1 x86_64) it suddenly stopped recognizing that my Windows 7 drive has anything on it. Fdisk cannot see any partitions anymore. Yet I can reboot the computer and run Windows 7 off it just fine. The windows drive should be /dev/sdb with sdb1 being its system reserved partition and sdb2 being the actual Windows partition.
Dmesg sees that it is there like my other drives, but it appears that the Windows 7 partition is not unaccessable to anything in Linux.
How could this work yesterday yet today it doesn't? I didn't change anything.
I haven't used my VB for a few weeks however all of a sudden it refuses to work for my normal non-root user. It's almost as if it can't find libraries in the /opt/VirtualBox directory. Initially it refused to start completely so I linked the required libs into /usr/lib64 ( yip real hack. Then it started but a vm would not start, and comes up with an error about a missing lib again which is definitely there. My non-root user is in the vb group and nothing besides system updates has changed. vb 3.2.10 slack64-current.
View 14 Replies View RelatedBooting up this morning, no problem. But I accidentally let my laptop go into suspend mode, which doesn't work, so I had to force a restart (Suspend mode on my laptop won't allow me to wake it up again). Now, on rebooting, X doesn't work. I usually boot to RL3 then use startx. Now it just flashes the screen then gives me this error -
Code:
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices .....
Fatal server error:
Failed to activate core devices.
Please consult the The X.Org Foundation support at [URL] for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. If I su - to root and then do "init 4", I get to xdm, and I can log in. X then starts, but with no sound, wrong keymaps, launchers not working; all sorts of things wrong. If I startx as root I get a normal desktop. I have tried copying root's xinitrc to /home/spoovy, but makes no difference.
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
Is it possible to install Adobe Air on Slackware? It keeps telling me the following
I was trying to install it so I could install TweetPocket.
Code:
Adobe AIR could not be installed because this is not a supported Linux distribution. Only RPM- and Debian-based Linux distributions are supported.
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
So I have installed Slackware 13.37 into VBox, for testing before I update my 13.1 partition on my desktop. Now I'm having a problem getting Flash to work, I keep getting the error
Code:
Adobe Flash error: could not load cURL library That is all the error says, I have checked and curl is installed and the flash player is in the right directory. So any help would be appreciated. Also here is a complete list of installed packages [URL]..
What is the correct way to install Adobe Flash on Slackware 64-bit?
I have tried copying "libflashplayer.so" into the following directory.
/usr/lib64/mozilla/plugins
Firefox still does not see the plug-in.
I verified that I did download the 64-bit version of the plug-in from the Adobe site.
flashplayer10_2_p3_64bit_linux_111710.tar.gz
I installed multilib. Could that cause a problem finding the flash plug-in?