OpenSUSE :: Power Management Settings Are Not Saved?
May 22, 2011
I've got openSUSE 11.4 64 bit system with stable 2.6.38 kernel and KDE 4.6.3. Problem is that when I want to change some settings in the power management (like brightness, screen energy saving time-off, display dim), they doesn't seem to save, even after the X restart and full reboot. It's seems like screen energy saving is set permanently for couple of minutes, don't matter what time do i set, it just discards my settings, even they are correctly viewed in the gui.
View 9 Replies
ADVERTISEMENT
Aug 15, 2011
Just found my PC with screen fully lit a good half-hour after leaving it. Went into "system settings" and checked the power-management settings and, as I expected, there were no management profiles. "Here we go again" I thought and logged off and then back on again. Checked the settings and there was "performance", the only one available. As usual in this situation, I'd tried "restore default profiles" and there were none.
Why does this profile keep getting lost in this manner? Where is it (and defaults if any?) supposed to be stored?
Graham Davis, Bracknell, Berks.
openSUSE 11.4 (32-bit); KDE 4.7.0; AMD Phenom II X2 550 Processor;
Video: nVidia GeForce 210; Sound: ATI SBx00 Azalia (Intel HDA);
Wireless: BCM4306
View 3 Replies
View Related
Nov 26, 2010
How do you set power management (suspend/sleep time is what I'm after) that applies at the login screen?
View 1 Replies
View Related
Jan 16, 2010
How do I set the network adapter power to maximum? In windows, this can be easily set under device manager --> hardware --> ..power management.
View 2 Replies
View Related
Nov 17, 2010
I have an odd problem since preupgrading from Fedora 12 to Fedora 14.
My power management settings are set to never put the monitor to sleep, yet after a certain amount of time, lo and behold, the Fedora box has gone blank and I have to enter my user information and password to get back to my gnome session.
In the power management preferences I have "never" selected for both putting the computer or display to sleep.
In the screensaver preferences "Lock Screen After" is *not* checked. (And if I click "advanced" I also note that "Power Management Enabled" is also *not* checked).
I'd just as soon not have to "log on" to this machine every time I'm away from it for a while.
View 1 Replies
View Related
Mar 21, 2010
I have selected to power down the monitor after 30 minutes, and suspend the computer after an hour. It does not work. With Beagle not running (more below), the monitor powers down after 30 minutes as expected. But then later (probably after an hour?) it powers up again and stays that way. Not exactly what I envisioned.I have removed Beagle from the set of running processes. The process list ("ps ax") shows Beagle as a serious consumer of CPU time, far more than any other process. (At termination it was at 500:00; the next most hungry process was /usr/bin/Xorg at 10:00. Most barely get over 0:01.) It introduces these problems:
1. after some amount of system idle time (it is about 5 - 10 minutes) Beagle starts consuming vast wodges of CPU time. I have dual core AMD 5200; both CPUs run up to about 70% usage until I do anything, like move the mouse. Then the usage drops back to the usual 5 - 10%.
2. When Beagle is thrashing the CPUs, the power management monitor thinks the system is busy. And powers down nothing.
View 4 Replies
View Related
Sep 29, 2010
I've attached a UPS to my server through USB. and sure enough up came a tab in Power Management Preferences for the UPS -- great.
There are power low options as follows:
"When UPS power is low"
"When UPS power is critically low"
The UPS sends a message to the computer when a threshold you set in the UPS is reached, in my case 25% of battery left.
The obvious guess is that this warning from the UPS is the "When UPS power is low" however, I don't know. It's just a guess.
Looking further at the data I can get from the UPS the battery data is as follows:
battery.charge: 100
battery.charge.low: 25
battery.charge.warning: 50
battery.runtime: 760
[Code]....
However, again, that's just a guess from what would make sense.
So my first question is, is there a way to know this information, and is there a place were these critical points are set, or are they all from the UPS. I'm guess there are some settings somewhere because not all UPSs are going to be able to supply this information. Some may only supply a battery level or some just a warning message so there must be some configuration for this somewhere.
My 2nd question is a probably a little harder to know the answer to. After getting this to work I wanted the added functionality of nut so I installed it and got it working and it uses the On UPS Power panel as far as I can tell.
Through all the nut documentation it talks about powering down on once the battery level reaches the critical point (I assume that is "When UPS power is critically low"). I don't see anywhere however where it mentions handling "When UPS power is low" so now the question comes up, will it have any effect at all with nut installed, i.e. what will happen?
Of course I can just "pull the plug" and start finding this stuff out but Linux is all about having the information and "knowing" (assuming all works as it should) I am asking to find out where this information would be -- and become smarter for it
View 5 Replies
View Related
Apr 2, 2010
I've just installed openSuSE 11.2, and I need to disable the feature that causes the laptop to suspend when you close the lid (and it's plugged in to the wall). I've already done this for my user profile, and I've attempted to do it for the root profile, as well, but when the GDM login screen is shown, the laptop still suspends when you close the lid.
View 3 Replies
View Related
Apr 20, 2010
After I have installed the Education package I cannot put my HP Pavilion laptop to sleep mode. I opened the Power Management and I can see the red light next to "CPU can be turn off". Also, when I close laptop lid it doesn't go to "Suspend to RAM" mode it still spin the fan.
View 2 Replies
View Related
Jan 6, 2010
I want to disable display power management.
I tried to achieve this by disabling 'Enable display power management' checkbox in the 'Configure Desktop -> Display -> Power Control' KDE configuration dialog. That didn`t help and display still goes into standby mode after some period of inactivity. Also, I tried to disable dpms functionality by calling 'xset -dpms'. That didn`t help too. Note that 'xset dpms force standby'
View 9 Replies
View Related
Jan 19, 2011
I am trying to reduce my uptime of my servers. I would like to have a way to bring the systems down during off hours, an come back online during first use. I know about WOL (wake on lan) found in the bios, but it seems as if the OS is missing something to complete the configuration.Are there any good docs (of which I havent found any yet, which is why I ask) on this topic? How about best practices to assist in power management?
View 5 Replies
View Related
Aug 26, 2011
I want to "build" a new backup solution for my home LAN. I have 3 openSUSE machines at various versions and 1 File Server with openSUSE 11.4.My plan is to plug a eSATA or USB3 docking station on the file server and then take backups from the clients either via rsync or Amanda.Since the backup will not be a daily activity, I would like to have the option to run the backup during night, and automatically, BUT, without any action from my part. So, I would like to attach a large external HDD on the machine and then:Power on the docking station/HDD.Perform the backup from the Amanda Server or rsync scripts.Power off the docking station/HDD.Do you know any docking station that has a "linux" power management?If not, how do I power up/power down from console an eSATA or USB HDD?
View 2 Replies
View Related
Jul 31, 2009
I've got a rather annoying problem with OpenSUSE 11.1 x86_64, I can't turn off the display power management! I've tried from the KDE 3 and 4 settings as well as GNOME, and finally YaST2. There's nothing in monitor's controls (the buttons on the monitor itself). The actual GUI controls in KDE/GNOME/YaST2 work (as opposed to being grayed out or disabled) and the system doesn't complain when I hit apply/OK, but every time I disable display power management, I wait about 15 minutes and sure enough, the screen blanks. I've checked and made sure the screen saver is disabled, I've looked for a setting to change in the YaST2 sysconfig editor and the kernel settings app, but can't seem to find anything. The only other thing I can think of is to try the acpi=off kernel boot option. I'd rather not resort to that. Anyone know if there is some super secret hidden setting somewhere that might be overriding everything else? Could this be some sort of ACPI incompatibility issue?
View 2 Replies
View Related
Sep 14, 2009
I am a brand new user coming from the MS environment. My impression of openSUSE is that it is like moving into a new house that is well built but the rooms are full of half-constructed self-assembly furniture and appliances without any specific instructions. Nor is it clear which does what and whether all are needed or not. There is a town hall down the road where fellow homeowners gather to discuss what each has managed to deduce about putting their own furniture together. The town hall has a sort of library where thousands of pieces of paper with instructions are stored in an ad-hoc filing system
My latest problem is that I have created a screensaver via the "Configure Desktop" application and set "Enable display power management" and set some timeouts.However, I seem to be asked for a password to unlock the screen when I come back to my computer. I have spent 2 hours trying to find the place where I can disable screen password locking but to no avail. I am perplexed and frustrated at how such an obvious function is so ****ed hard to configure. This is the impression I am getting of Linux in general - it is novice user-hostile and badly organised.
View 9 Replies
View Related
May 28, 2010
I run V11.1 on a minimalised install on a stick with TWM, no KDE at all but I cant get rid of the screen shutdown after about 20 minutes. Also I have several other boxes with v11.1 with KDE and still cant get rid of these screen shut downs.I dont believe this is coming from the bios in these machines. they are all Intel D945 MBs with some sort of Nvidea cards.
My app normal runs with no user mouse or input and is pocessor intensive.I would like to retain the power shutdown and reboot capability from comand line.I realise its not as simple as pulling symlinks of of the init levels in the new complicated distros, but I was suprised the non kde twm install still shuts down the screen.So I want a low level level fix that will remove anything kicked off by init that will derate the system performance or turn off the screen.
View 4 Replies
View Related
May 28, 2010
On the last release, I had this app installed where I could pick my power profile. I could use power conservatively, and performance would suffer a bit, but longer batt life,or I could have it automatically detect, or I could have the apps use all the power they want and then some. I'm looking to reinstall that app. What was the name of it?I can't remember, and so far, can't find.
View 2 Replies
View Related
May 15, 2011
how to disable the power settings for my monitor so that it always stays on.
View 2 Replies
View Related
Aug 21, 2011
It appears my profiles are gone, and thus i have got no way in changing settings in the 'Desktop Configuration' (Systems Settings)so, when I go toapp starter --> Configure Desktop --> Power Mgmtthere are NO profiles under 'global settings' or 'power profiles'anyone has got an idea what's cooking here
View 9 Replies
View Related
Jun 13, 2010
I'm new to Fedora; been using it for just a few hours. I have Fedora 10 setup on a LiveUSB and it works great. However, any setting that I make or files I save are gone when I reboot. For instance, I change the mouse cursor speed and made a "Test" word doc and saved it to the desktop. Yet when I reboot, the "Test" file is gone and does not even show as a recent document and the mouse speed setting was set back to default.Am I missing something that need to be accomplished prier to the shutdown?
View 7 Replies
View Related
May 24, 2010
I'm having a problem with the mesa-dri-drivers-experimental, I bought a new monitor, Samsung 24" Widescreen LCD Monitor (B2430H) and my old monitor was a 24 inch too but with a different native resolution, my new monitors native resolution is 1680x1050 and I try to change the settings in the system settings/ display/ size&orientation area since the mesa drivers don't have a xorg.conf but my settings don't save after a reboot. Is there a config file for the mesa-dri-drivers-experimental where I can change these settings?
View 5 Replies
View Related
May 21, 2010
For various reasons, I have reinstalled Ubuntu 10.04 three times on my laptop. The 2nd time I reinstalled it, when I would connect to a wireless network, it would say connected but the network manager icon at the top panel said disconnected. What confused me is when I booted up during the 2nd install, it connected to my wireless without a problem. Is wireless info (saved networks, etc) saved in the home directory somewhere??
I didn't have the icon problem the first time, so I thought hmm, I have my stuff backed up, let's try it again except let's format everything this time. The third time I had no issues with the icon saying disconnected. My partitions are split with /root and /home. The first 2 times, I did not format home. The third time I did. Even though the first time I didn't have this issue, I couldn't understand why it popped up the 2nd time. Now that I formatted EVERYTHING, the issue isn't there.
AKA:
1st try - no issues - did not format home.
2nd try - icon says disconnected when connected - did not format home.
3rd try - no issues - formatted everything.
View 2 Replies
View Related
Jul 27, 2010
It's weird - every time I restart Ubuntu, my screen settings are at 1024x768@60Hz. When I change them to my preferred settings, this will completely destroy the order I like about my panel icons and it starts to suck.
I use an Onboard Intel graphics card.
Any advice on what to do?
View 1 Replies
View Related
Feb 11, 2011
I know this has been covered before but I can't find a resolution to the issue. Kubuntu simply refuses to save the screen settings, and each time I reboot it returns to 1440 x 900. The correct resolution should be 1920 x 1080.
KRandr shows 1440x900 (auto) in its drop down Size field. I've set krandr to load on startup so that I can set the correct resolution but of course this means I have to set the panel size as well. I've only recently installed KUbuntu and it's great except for this issue. Surely there must be a simple fix? I'm not a noobie and have about 4 years experience on Ubuntu / openSuse etc.
View 1 Replies
View Related
Feb 28, 2011
I've had this problem before with firefox: too many pluggins and fiddling messed it up and no way to revert to a clean version.
Code:
sudo apt-get remove --purge audacity
does NOT remove some config files hidden who knows where. Proof is, when doing "open
[code]...
View 3 Replies
View Related
May 7, 2011
I am running a dedicated audio PC (Ubuntu 10.04 on Intel Atom 525) with a Juli@ sound card. I had everything set up and working great up until I accidentally pulled the sound card out of its slot while the computer was running. After that, the computer no longer recognized the Juli@ card.
I managed to fix the basic problem by following the Comprehensive Sound Problem Solution Guide- deleting and reinstalling ALSA is what did the trick. The only problem remaining is that the computer no longer remembers the output settings in the Sound Preferences dialog. The setting stays for as long as the computer is on, but as soon as I turn it off and reboot it, the sound output setting reverts back to the internal audio. I tried 'sudo alsactl store 1', but this does not work. Does anyone know how to fix this?
View 2 Replies
View Related
Jan 18, 2011
After a disastrous foray into LDAP I restored NIS on a very simple network run by a very simple operator. Everything now works except for YaST on the NIS master. I can't manage NIS users in YaST any more. The option 'show NIS users' is now absent from the 'filter' button up in YaST "User and Group Management" So, after following the YaST route to LDAP there seems no way back...
These are OpenSUSE 11.3 boxes and the slave NIS server can't [obviously enough] delete expired NIS users on the master, although it sees them fine. Disabling or changing NIS server or client on the Master simply restores the 'wrong' settings - nothing is erased or cleaned. How do I clean up NIS controls so YaST sees it properly? or What do I need to do to restore NIS group & user control to YaST?
View 2 Replies
View Related
Jun 23, 2011
Not sure if others have noticed this. When I go into sound settings, click the output tab, select the sound device I want to edit and change the bass levels etc, close the window and go back in all the settings are reset to default and no changes are saved.
If I leave the window open and make the changes they are reflected in VLC for example, but if I close the window it again resets to defaults and my Bass is back at Maximum....
Is this a BUG I should report or is there something I can download to get this configured elsewhere or to fix this issue? I seem to recall something similar in Fedora 14 that was fixed, but I cant remember how I did it now
View 2 Replies
View Related
Jan 27, 2010
Alright this is not a huge issue but a rather annoying one. I hook my laptop up to my lcd to watch movies all of the time. The problem is though I have selected and reselected many times for the screen to not power off after so many minutes of inactivity. But for some reason it doesnt work. If i set it to an 1 it still like every 5 minutes turns off my screen. Im running 9.10 on a toshiba satellite with an intel graphics card.
View 2 Replies
View Related
May 15, 2010
I have a laptop with 10.04 installed. When it is plugged in with AC Power, the screen fades black after a few minutes and locks up after about 10 minutes (shows a dialog for passwd when back).This gets really annoying when listening a movie or just reading text.System->Preferences->Power Management is set to "never" for everything.gconf-editor->apps->gnome-power-management is set to "0" for everything finishing with *_ac.
View 1 Replies
View Related
Sep 22, 2010
I am wanting to completely disable Power Management, can I do it through the GUI? I am a former OpenSuSE user & am use to YaST. So it is a little hard finding ways to edit some settings.
View 2 Replies
View Related
