Slackware :: Md5sum Error In 64-current
Mar 29, 2011I'm getting an md5sum error on two files in the latest slackware64-current:
This problem doesn't appear to be due to my download.
The 32-bit slackware-current has no md5sum errors.
I'm getting an md5sum error on two files in the latest slackware64-current:
This problem doesn't appear to be due to my download.
The 32-bit slackware-current has no md5sum errors.
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
When I run xload, it gives the following:
Code:
xload
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
It's an up-to-date Slackware64 current, with only ruby and poppler downgraded to 13.0, but I don't think either would do it.
It's not a big deal, but I wonder if it might be a sign of some bigger problem.
I'm trying to compile virtualbox 3.2.10 con slackware current 32bit through sbopkg
I get this error (I'll copy only the end part)
Code:
CXX VMMR3 - {C}/src/VBox/VMM/VMMAll/TMAllCpu.cpp
cc1plus: warnings being treated as errors
In file included from /tmp/SBo/VirtualBox-3.2.10_OSE/src/VBox/VMM/VMMAll/PGMAll.cpp:236:0:
[Code].....
While I was compiling kuickshow I noticed this error:
Code:
src/CMakeFiles/kuickshow.dir/kuickshow_dummy.o
Linking CXX executable kuickshow
/usr/lib/gcc/i486-slackware-linux/4.4.3/../../../libImlib.so: undefined
reference to `png_check_sig'
collect2: ld returned 1 exit status
make[2]: *** [src/kuickshow] Error 1
[Code]...
I am trying to build "LMMS - Linux MultiMedia Studio" on Slackware Current.
CMake is halting on "printf" lines in various .cpp files. I am assuming it's a conflict with the newer GCC? Does anyone know a work around for this issue?
I've tried commenting out the printf lines but I think they may be needed in the application. Apparently there are lots .cpp using the printf call.
since an update to the latest -current version, it comes to an error inside the init script from the initrd.gz on my system, shortly behind the scan for encrpyted devices inside lvm containers.
The message is
Code:
mdadm: No arrays found in config file
1 logical volume(s) in volume group "vg" now activeash: missing ] mount: mounting crypt-vg-root on /mnt/failed: No such file or directory ERROR: No /sbin/init found on rootdev (or not mounted). Trouble ahead. You can try to fix it. Type "exit" when things are done. If i then unlock the crypted root device within the lvm, boot continues. I think this is a bug, because configuration did not change, and it worked before the update.
When I run frozen-bubble, I get this error:
Code:
lysender@darkstar:~$ frozen-bubble
Can't locate Locale/gettext.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.12.2/i486-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib/perl5/vendor_perl/5.12.2/i486-linux-thread-multi
I have updated to current as of Jan 2 but I'm not really sure when the problem started since I only play with frozen-bubble sometimes.
Will rebuilding fronzen-bubble solve it? Haven't tried it yet as of now.
Code:
Building flash-player-plugin
flash-player-plugin:
flash-player-plugin not found in /var/cache/sbopkg.
--2011-05-22 10:36:40-- http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_10_linux.tar.gz
Resolving fpdownload.macromedia.com (fpdownload.macromedia.com)... 95.100.2.70
[Code]...
I tried three times, by removing /var/cache/sbopkg/install_flash_player_10_linux.tar.gz then start sbopkg again.
EDIT: I went to slackbuilds.org, downloaded flashplayer from there, and checked the md5sum. Still the same of course.
I just installed the latest updates from Slackware-Current, The update went fine, did a reboot, installed the nvidia driver (NVIDIA-Linux-x86_64-195.36.08-pkg2), started X successfully. Now, whenever i open an X dependent application it gives me the following error:
Quote:
symbol lookup error: /usr/lib64/libXi.so.6: undefined symbol: XESetWireToEventCookie
I am running a Multilib setup, i have the latest toolchains from AlienBob installed. the ldd output goes like this:
Code:
linux-vdso.so.1 => (0x00007fff9ebd2000)
libXext.so.6 => /usr/lib64/libXext.so.6 (0x00007f8daef94000)
libX11.so.6 => /usr/lib64/libX11.so.6 (0x00007f8daec5b000)
libxcb.so.1 => /usr/lib64/libxcb.so.1 (0x00007f8daea3f000)
[code]....
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format
WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format
WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format
FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
Upgraded to 'current' and now have a series of problems. First, when trying to 'startx' to fire up KDE I get the following error message, "Could not start d-bus. Can you call qdbus?" If I try Xfce it gives this similar message, "Failed to execute dbus-launch to autolaunch d-bus sessions. When logging in, but before entering the password this error message pops up:
'Dialups-check-enab'
'nologin-str'
'Configuration error - unknown item. (notify administrator)'
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View Relatedslackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies View RelatedFirst time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedI've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies View RelatedI've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies View RelatedI use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies View RelatedThis is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies View Relatedi just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies View RelatedI'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies View RelatedI'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
Saw this Post on LWN this morning:
[URL]
I wonder if it would make sense for Pat and the team to bump the Kernel from 2.6.37.5 to 2.6.38.2 (or 2.6.38.?) before 13.37 is released ?
I'm looking for a good IDE for C/C++, that runs well in slackware. I used CodeBlocks, but I can't compile in the current, and its getting a little old. I see a lot of threads talking about anjunta and kdedeveloper, but I don't like these.
View 14 Replies View Related-> Announced in the Changelog.
View 14 Replies View Related