I wrote a small site to search slackware packages containing a wanted file.slak.homelinux.org..It do searches in official slackware repositories and some non official.It is based on PACKAGES.TXT, so all repositories containing it can be used.If a repository contain even the MANIFEST.bz2 file, then this tool can search packages from its content.Results are cliccable link so to download the package directly.
View 14 RepliesI've never figured out a good program to use with file globbing from http sites. Wget works with ftp sites and file globbing and for mirroring I use lftp, but I would really like to download just the files that start with "xf" from Robby's site.
View 7 Replies View RelatedAt first I thought it might be a free software thing but I went on the debian package search site and stable, sid, and experimental all have packages for wine. Why is there none for wheezy? Is it a temporary dependency thing or...? I've googled this but there has been no kind of answer anywhere. Right now I'm using the frickelplatz apotsid repository as they package the most recent version of wine but if I could use a standard debian repository I would.
View 6 Replies View Relatedfor example we search a file for a certain keyword..is there any application available which will enable us to search for a single keyword in all the files within the folder ?i want to search for a keyword in about 1000 files..if i do it manually it will take loads of time..
View 6 Replies View Relatedslack64 13.1
bash-4.1$ grep sbin/timeconfig /var/log/packages/*
/var/log/packages/glibc-2.11.1-x86_64-3:usr/sbin/timeconfig
/var/log/packages/glibc-zoneinfo-2.11.1-noarch-3:usr/sbin/timeconfig
[code]...
I have just installed Debian Lenny and was trying to upgrade the installed packages from the packages.debian.org site. when i asked synaptic to add the downloaded packages the would not appear, but when i checked the .xsessions file there are entries saying that the packages were being ingnored because they were either different versions, the MD5 did not match or even "can't find pkg". i have to use the local library to download the packages because i dont have an internet connection at home.
[Code]...
[URL].. One of my reference link: A very good place for search for drivers since many hardware manufacturers do not have a driver site for open source.
View 1 Replies View Relatedwhy are there no packages for Debian on the wine site - only Ubuntu? Is there no repository for up to date Debian wine packages?Also about Catalyst: Phoronix dudes are saying the the tearing thing is fixed on Ubuntu's Meerkat with Catalyst 10.10 beta. Can I expect the same on Squeeze or does it require specific XOrg versions to the tearless 2D movie watching and Window moviing?I only use wine for a few games. Don't get me started on the games for Linux:
View 6 Replies View RelatedI have downloaded fedora 9 iso to my xp os so I can dual boot my machine. I can't seem to find a place to plug up my RJ-45 to download the extras package in an RPM or a tar file so that I can transfer it onto my linux os so I need a wireless site to download from.
View 2 Replies View RelatedWebpin is unable to search for packages. Its search for them for ever and cannot find nothing.
Any turn around to fix the issue?
I have realized that in not installing suggested packages I've missed out on a ton of doc files, which would really come in handy while I'm away from internet access.
Is there a way take a list of currently installed packages and find out which of them have doc packages available? Possibly install them in a single step? I have been playing around with aptitude and apt-rdepends, but I'm not quite sure how to go about this. Somehow take a list of installed packages, run it through an apt-cache search, and end up with a list of -doc packages to install? My bash-fu isn't the greatest, and I suppose this could be a bad idea to begin with.
I just installed Netsurf, but I was confronted with "libnsbmp is not installed". So I installed libnsbmp.
The error "libnsgif is not installed" appeared when installing libnsbmp.
The error "libpng is not installed" appearded when installing libpnf.
...
I installed all that I was asked to install. However, when I was installing libcss, it said that "Package libparserutils was not found in the pkg-config search path. Perhaps you should add the directory containing 'libparserutils.pc' to the PKG_CONFIG_PATH environment variable". I have already installed libparsercutils but not in the /usr/lib dir.
What should I do to continue my installation? And anyone could tell me what are those lib stuff? I installed zlib with the apt-get install command.Can I get other lib stuff with the same command?
I had some major bugs with KDE 4.3 and 4.4 and the only way that I could fix them was to install the entire KDE 4.5. This was mid-Summer. Now I would like to upgrade to Maverick the proper way and have 4.5 in a stock repo.
I managed to get most of kde back to stock by luck and uninstall/reinstalling kdebase stuff and kubuntu-desktop a couple of times. A pain in the neck trying to find important packages that are already installed from a previous PPA.
BTW my sources.list is stock right now.
Does anyone know of a way to search for installed PPA packages that are not in the stock repository?
Can't access to slackware FTP site as anonymous ?It asks login and pass.
View 14 Replies View RelatedI noticed that the official Slackware packages don't contain static libraries. The SlackBuild scripts from slackbuilds.org or from Slackware DVD usually contain --disable-static option to prevent building the .a file. And if configure script doesn't allow such option, the .a file is deleted before the package is created.I am wondering what is the reason for that? Is it just the matter of conserving disk space? Are there also other reasons?
View 11 Replies View RelatedI tried to build several packages designed for slackware 13 at slackbuilds. Those was a simple apps like ardour, audacity for example.
[Code]...
My CPU is AMD Phenom 9550 Quad core. It supports 64 bit. My os is slackware 13_64. What do I need to change in slackbuild to create a txz package for those apps?
I screwed up and managed to overwrite my MBR with one that had a different partition table, thereby losing access to all of my partitions and data. Now, I was semi-smart and backed up the MBR before I did this, but the "semi-" part is that I backed it up onto the hard drive in question because I was thinking only in terms of losing my ability to boot from the MBR, not the whole partition table.
So...as I see it my only means to recover my data is to find and recover that 512 byte block on the disk media. Having read a little bit, this seems possible given that I know to look for a) the MBR signature at offset 510, b) the partition status byte at offset 446, and c) the partition type byte at offset 450.
What I need is help figuring out the most efficient way to do this. I've experimented with a shell script using dd, hexdump, and grep, but searching 1000 blocks takes ~20seconds, so to search the whole drive (100GB) will take something like 800hrs. This is limited, I believe, by the fact that my live disk of Knoppix won't recognize a drive on the SATA bus, so I had the target drive mounted through a USB adapter. But even if it were being accessed via SATA, I have a feeling it would be pretty slow.
I need someone who is an expert to help me figure out a script, program, etc. that can search for and identify the sector where my MBR backup resides more efficiently.
I mount two ntfs partitions under my Slackware/win/C/win/Dwhen i process a search via "find" it give me the following when reach /win directoryfind: warning: not following the symbolic link '/win/C/Document and settings'i wantto know what is going on and the solution
View 2 Replies View RelatedI have file which consists of many files with their path,i need to check for the file exists in the given path,how to check?
View 12 Replies View RelatedI have uploaded some slackware packages to ftp://ftp.herpderp.ca/slackpkg/. These are packages that I haven't been able to find anywhere else and they are all built on a clean slackware 13.0 system using slackbuilds from slackbuilds.org. I will be uploading more in the future as I build them.
View 8 Replies View RelatedI am familiar with slackware's slocate.What slocate doesn't have is an option to limit returned results from specific users or groups.What's more I can't seem to find a gui/web frontend so that people without knowledge of cli can benefit from the slocate's indexed search.So I turn to you all, is there another tool, that supports per user/group searching and a web (preferably) frontend?(clarification) i think slocate returns results related to the user running the search (files that he owns as well as files that are owned by his primary and other groups). Is that correct? I basically want a search user (who will be a member of the several groups that our office is structured like) to get results by giving as search criteria not only the filename, but also the owner of the file and / or the group
View 5 Replies View RelatedIt would appear that the search (find) function has been removed from Konqueror in KDE 4.6. Is that the case? By "search" I mean the ability to search your hard drive, not a web page or document.
View 1 Replies View RelatedI have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
I've been on a quest to enable full routing through my openvpn tunnel between my office and the colo. Masquerading will work, however it will throw off anything key based and makes a lot of things just more difficult and vague in general. Is there an easy way to do this via iptables? I tried using quagga hoping it would magically solve my problems, however it does not seem to do my routing for me . I just did a basic static route within zebra...
View 3 Replies View RelatedI have three locations with a central office connected to two remote locations. At the central office I run on a cisco asa 5505 two site to site vpns. The remote end of the first site is a checkpoint firewall , and the remote end of the second site is racoon on debian. Both sites are up and working. However, where at the first site traffic goes both ways, at the second site it only works from the central office to the remote office.
For example, I can ssh from a host in the central office to a host in the first remote site (through checkpoint firewall,) then ssh back from that host at the remote office to any host in the central office. In contrast, after I ssh from a host in the central office to a host in the second remote office (through racoon), I cannot see the central office hosts (ping the ip address of a central office host, ssh, etc. all fail.) The vpn settings at the central office (the cisco asa 5505) are identical. So it seems to me that some routing magic is missing on the host running racoon at the second remote office. Where would such setting reside? racoon config files? iptables?
any one know where all sh file of linux can b downlaoded...any site
View 3 Replies View RelatedMaybe a site-to-site Ouija board connection.
View 5 Replies View Relatedseems like i got a hacker on my server who placed a "western union fishing" site on it.i am not able to delete the directory with the root user.
Code:
root@laforge:/var/www/html/mailadmin.somewhat.com> ll
total 12
[code]....
Does anybody have strigi krunner plugin work as search-engine and not as lottery? Same goes with search desktop containment - when typing in few letters from the file name, it never founds the file, only displaying ca 10 random files based on content(i guess) instead.
View 3 Replies View RelatedI did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.