Slackware :: Mounting NTFS Drobo To Slackbox 13.1
Jul 26, 2010
I have successfully installed Slackware (With a bit of bumps on the road trying not to use inteldrmfb resulting in microscopic font)<---Fixed... Now I want to put my Currently almost full Drobo (NTFS) on the machine. I went and did a dmesg found the device name and went to do a mount /dev/(Name) /mnt/(folder already created)
and it resulted in this....
NTFS-fs error (device sdf1): pars_ntfs_boot_sector(): Volume size (7tib) is to large for this architecture. Maximum supported is 2Tib. Sorry. NTFS-fs error (device sdf1): ntfs_fill_super(): Unsupported NTFS File system.
I understand that the problem has something to do with NTFS, I see that there is a program called NTFS-3G that Ubuntu uses to get mediocre R&W onto NTFS...
View 5 Replies
ADVERTISEMENT
Jul 18, 2010
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
View 9 Replies
View Related
Jan 8, 2011
On a clean install of Arch linux I edited fstab to be like so :
Code:
/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
View 11 Replies
View Related
Sep 3, 2009
I've got a Desktop System that Automounted Two NTFS partitions in F10 so I could declare them SAMBA Shares and have my other XP and Vista Machine Access them whether my dual boot machine ran XP or F10. Now I've switched to F11 and cannot get the NTFS Partitions to Automount at boot. If I browse with COMPUTER and let the system mount the NTFS partitions once it is running the mount command returns the following output:
[code]....
I believe I need to modify /etc/fstab but cannot get the syntax correct to save my life.
View 1 Replies
View Related
Jun 28, 2011
I have both windows and ubuntu 11.04. In ubuntu I can mount then edit NTFS drive without being asked for permission. It's not safe that way because anyone using my computer can edit my windows files. How do I make it ask for password when mounting NTFS?
View 2 Replies
View Related
Sep 29, 2010
How to mount ntfs partitions into red hat linux. I'm trying to mount but not mounted that
View 8 Replies
View Related
Mar 7, 2011
until recently, they did fstab mount quite happily, but now, they don't
the error I get is:
Code:
Mountall mount /media/win7 [1089] terminated with status 21
My fstab has not changed but here it is:
Code:
/dev/fd0 /media/floppy0 vfat noauto 0 0
UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1
[Code]....
Oh if I make the windows drive the first avail, then it boots just fine.
View 7 Replies
View Related
Nov 23, 2014
I am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.
But when I run the command:
# mount -r -t ntfs /dev/sda3 /mnt/windows
I get the following response:
mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device
View 2 Replies
View Related
Oct 29, 2009
I need to my NTFS partitions mount automatically "at first" after login without any further intervention of user.
View 11 Replies
View Related
Mar 5, 2010
I am trying to mount 3 NTFS partitions, but they aren't showing up in the /dev directory. If I fdisk the drive, the partition shows up, but nothing in /dev...
Here is the output of fdisk -l as well as the results of my attempt to mount the partition.
View 6 Replies
View Related
Aug 28, 2010
Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdc1 is already mounted on / mount failed. Not sure what happened but it worked fine till last reboot. It's a 250g NTFS drive named MEDIA device /dev/sda1. why it won't mount now.
View 4 Replies
View Related
Oct 17, 2010
I used Wubi to install Ubuntu 10.10 onto my laptop alongside Windows 7. I need to access my windows harddrive, however, so I used NTFS Configuration Tool to mount the drive. However, whenever I reboot, it fails to mount and I actually have to go back into NTFS Config Tool, delete the old mount, and remount it. This is tedious. My /etc/fbstab file looks as follows:
[code]...
View 2 Replies
View Related
Feb 11, 2011
I have successfully mounted the NTFS partition containing win7 via Ubuntu.
I followed these 3 steps:
Code:
Now I have unmounted the partition and want to remount it again except this time so that it is mounted as Read-Only.
View 1 Replies
View Related
May 29, 2011
I am running 11.4 from a thumb drive,mainly because something is fishy with my main hard drive, but installation is not my reason for this thread (though I think fixing one problem will remedy the other). My winbloze install is short stroked with ~50gb for OS and ~200gb for media storage. I have no problem accessing the storage from windows, but I am unable to mount the storage partition under Ubuntu. I get the following error:
Error mounting: mount exited with exit code 14: Hibernated non-system partition, refused to mount.
Failed to mount '/dev/sda2': Operation not permitted
The NTFS partition is hibernated. Please resume and shutdown Windows properly, or mount the volume read-only with the 'ro' mount option, or
mount the volume read-write with the 'remove_hiberfile' mount option.
For example type on the command line:
mount -t ntfs-3g -o remove_hiberfile /dev/sda2 /media/Laptop Storage
When I run that command, I get this:
su: invalid option -- 't'
View 6 Replies
View Related
Jan 26, 2010
I've recently installed Arch on my main PC, and I decided to use Xfce4 desktop environment as appose to gnome that I use on my laptop. Firstly, I had to search round for an icon theme to get any of the icons working (they were all just papers with red crosses in them to start with), which I think is taking lightweight a bit too far :P, but just my opinion.Now i've got that sorted I turned to the problem of auto-mounting partitions. I'm having some trouble getting HAL to auto-mount my NTFS partitions which have my documents and music on. They are NTFS because i've got dual boot windows, and had windows before Archlinux so NTFS was the logical fs type to use. I think HAL is auto mounting dvd's etc. (can't be sure as I aren't in Arch at the minute)I can mount the NTFS partitions manually using:mount -t ntfs /dev/sda(number from 1 through 3) /mnt/sda(1 through 3)
However, I can only access this via root, so I carried out: mchmod scott.scott /mnt/sda(1-3)or something similar and that works fine, so I know they can be mounted successfully. I've tried auto-mounting them using fstab but can't seem to get this working, and I would rather not have fstab auto-mount them, I would rather let HAL sort all that out for me.I have checked that dbus, hal, consolekit and xf86-input-evdev are all installed (although im not sure what xf86-input-evdev does).Has anyone got any ideas why its not auto-mounting the NTFS partitions. My laptop mounts the NTFS windows partition fine using gnome.
View 6 Replies
View Related
Jul 7, 2011
I am new to Linux platform and have installed RHEL 6 on my computer. I have gone through different posts on websites regarding how to mount windows drive on to the Linux file system.Here are few results of my trial where results are slightly overwhelming for a guy like me:
1. Mounting NTFS file system using mount commandAs a su-)
" $mount -t ntfs /dev/sda1 /media/MyFilesystem"
Output: error: unrecognised file system ntfs
2. I followed step by step instructions of installing Fuse and ntfs-3g_ntfsprogs but had no luck:
while using this command for the installation of for FUSE-0.9(which I guess prepares files for installation) I am getting this error :
" Command use: ./configure --exec-prefix=/; make;make install"
Error: "Checking Kernel source directory.../usr.src/kernels/2.6.32-71.e16.x86_64...Checking Kernel source version.......Not found "
Configure error: cannot determine the version of the Linux kernel source.Please configure the kernel before running this script.
Woooh , as u can see my Linux version is mentioned in that message so can anyone lemme know whether this issue is because of the incompatibility of Fuse with my version of Linux or am I suppose to make some changes in the command itself.
View 7 Replies
View Related
Jan 3, 2009
How to get a NTFS external drive to mount in Ubuntu.
View 9 Replies
View Related
Jan 15, 2009
I have two HDD in my computer and one is in NTFS which in linux it show up and the name is sdb1 and when I try to get it to mount the drive it give me the following error at the bottom of the screen:
hal-storage-fixed-mount-all-options refused uid 1000
View 6 Replies
View Related
Apr 25, 2011
I have Debian Squeeze installed. I have 3 different HDDs, one of them is SATA, the other 2 are IDE, on one of which I have the distro installed.
How do I mount the other 2 partitions? I see them in "Places" but when I click on them I get an error message "Unable to Mount <The name of the volume> Can not get volume.fstype.alternative".
I can see both volumes in /dev/ntfs. I tried doing
Code:
View 14 Replies
View Related
Sep 4, 2010
how can it be done?
I'm running 64 bit linux mint 9.
View 3 Replies
View Related
May 15, 2010
What are the necessary packages for mounting NTFS partition on CentOS? i tried installing fuse-ntfs-3g but got a result saying its not available.
View 1 Replies
View Related
May 29, 2009
I want to mount ntfs partition in rhel5 I searched a lot in google and finally understood that these three RPMS are must to mount ntfs partition in rhel5. My kernel version vmlinuz-2.6.18-53.el5. As per instructions in the net I downloaded these rpmms
fuse-2.6.5-1.el5.rf.i386.rpm
fuse-ntfs-3g-1.1030-1.el5.rf.i386.rpm
fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
First and second rpms are installed successfully but third is showing errors saying
rpm -ivh fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
Failed dependency
/boot/vmlinuz-2.6.18-53.el5 is needed by fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
But I copied vmlinuz-2.6.18-53.el5 in /boot even though it is saying dependencies missing
#rpm -qa | grep kernel
kernel-headers-2.6.18-53.el5
kernel-xen-2.6.18-53.el5.
#modprobe fuse
FATAL: module fuse not found
#uname -a
Linux server2.vth.com 2.6.18-53.el5xen.
My query is that why am unable to install the kernel module. Currently running kernel-xen-2.6.18-53.el5. I tried in another system above three rpms were installed successfully without any errors. What was the reason for my system.
View 2 Replies
View Related
Jan 13, 2011
I have installed Redhat Enterprise Linux Server 5 on my laptop. I have also installed Windows 7 Operating system on the laptop. I want to access windows 7 created ntfs partitons on RHEL 5 server. I tried installing the following rpm's on the rhel5 for accessing the ntfs partitiins.
1. fuse-2.7.4-8_12.el5.i386.rpm
2. fuse-devel-2.7.4-8_12.el5.i386.rpm
3. fuse-libs-2.7.4-8_12.el5.i386.rpm
4. fuse-ntfs-3g-2010.5.22-1.el5.rf.i386.rpm
[code]....
View 1 Replies
View Related
Mar 31, 2010
I have reformatted my hard drive with allocation size 64K for a better performance on my WDTV HD media player(dealing with large files). When I mount this drive on Linux, the mount tells me that "blksize=4096".If I keep writing files usinghis default etting(blksize=4096) to my NTFS formatted hard drive, will my WDTV be able to benefit from the performance improvement of 64k allocation size ? Should I try and mount my hard drive with a larger blksize ?I did some research on google but couldn't find an option to increase the blksize when mounting an NTFS pre-formatted drive.
View 1 Replies
View Related
Dec 19, 2010
Is it possible to use the 'discard' option when mounting an ntfs-partition? Because I'm buying an ssd and I intend to dual-boot windows xp (which doesn't support TRIM) and Ubuntu 10.10 (which does).
View 3 Replies
View Related
Dec 27, 2010
let's say this system has 3 hard drives. Drive #1 and #2 are RAID 0 and Windows7 lives there. It is a hardware RAID, not software.
On Drive #3 Ubuntu has been installed using WUBI - it boots up and works okay - but it does not see the RAID array.
Do I just need a linux driver to be able to see & mount my "Windows" RAID0 array? Or is this even possible? Can anyone point me in the right direction?
View 1 Replies
View Related
Feb 1, 2011
I've been working for a while to help a friend re-activate her system after a Windows crash. I tried every way I could to restore Windows, but the system is thoroughly bollixed. The data is still there on the disk, and you can read/write if you boot off of external media. I backed up her data that way.
Details if you need them, but for now suffice it to say that I finally got her up and running by installing Xubuntu Lucid in a dual-boot setup. However Xubuntu isn't automatically recognizing and mounting the NTFS partition the way I would expect it to. I had her run a few commands in the terminal, and here's what she got.
Output from sudo fdisk -l:
Code:
Disk /dev/sda: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
Ordinarily I'd use mkdir then mount to solve this. But I'd like to check a few things before I go and do that.
First, as I understand it if a Windows instance is not shut down properly it can make it difficult for Linux to mount the partition. The usual solution is simply to reboot Windows and then shut down properly, but that's impossible in this case. Will that affect the mkdir/mount solution?
Second, the fact that /dev/sda1 doesn't even show up in fstab causes me some concern. Would that be a problem for mkdir/mount?
And third, how to I set it up so the NTFS partition mounts automatically?
View 7 Replies
View Related
Mar 25, 2011
I have been trying to use fstab, writing a script in /etc/init.d to mount my external ntfs usb drive. I have had absolutely no luck and I have tried just about every solution I could find on the web except for writing a udev rule which I have never done so I am not exactly sure how.
My solution for the interim is to put the mount command in the rc.local file. That works, but I don't understand why I can use fstab to mount it. Putting it in the fstab gives me errors like "unknown file system" or just "An error occurred during mounting of drive" and then the booting stops. I tried using both ntfs and ntfs-3g.
View 5 Replies
View Related
Feb 15, 2011
I have an Ubuntu 10.04 box that accesses NTFS drives along with ext4. Recently, I switched from ntfs-3g to Paragon NTFS driver, which is proprietary, but free of charge. It feels quite faster on my internal drives. Now I have a problem with external eSATA NTFS drive. When it is detected, I mount it via Nautilus GUI, but it gets mounted with the ntfs-3g driver. (It can be mounted via command line with the Paragon driver, but this is less convenient. How can I configure my system (is it Gnome or some system-wide configuration ?) to mount all NTFS drives with the Paragon driver?
View 2 Replies
View Related
Sep 27, 2009
I know nothing about linux. But my friend says linux is good. So, I kept a copy of fedora core 10 i386. My fiend has a lot of movies about 100 in his ipod. So, I took it. It contains lot of viruses and I opened the ipod in windows but my windows has malfunctioned due to the virus. So, I have installed the fedora core 10 i386. I have some important information in the windows ntfs partitions. How do i mount those ntfs partitions.
View 8 Replies
View Related
