I want to mount ntfs partition in rhel5 I searched a lot in google and finally understood that these three RPMS are must to mount ntfs partition in rhel5. My kernel version vmlinuz-2.6.18-53.el5. As per instructions in the net I downloaded these rpmms
fuse-2.6.5-1.el5.rf.i386.rpm
fuse-ntfs-3g-1.1030-1.el5.rf.i386.rpm
fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
First and second rpms are installed successfully but third is showing errors saying
rpm -ivh fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
Failed dependency
/boot/vmlinuz-2.6.18-53.el5 is needed by fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
But I copied vmlinuz-2.6.18-53.el5 in /boot even though it is saying dependencies missing
#rpm -qa | grep kernel
kernel-headers-2.6.18-53.el5
kernel-xen-2.6.18-53.el5.
#modprobe fuse
FATAL: module fuse not found
#uname -a
Linux server2.vth.com 2.6.18-53.el5xen.
My query is that why am unable to install the kernel module. Currently running kernel-xen-2.6.18-53.el5. I tried in another system above three rpms were installed successfully without any errors. What was the reason for my system.
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
I am trying to mount 3 NTFS partitions, but they aren't showing up in the /dev directory. If I fdisk the drive, the partition shows up, but nothing in /dev...
Here is the output of fdisk -l as well as the results of my attempt to mount the partition.
I am running 11.4 from a thumb drive,mainly because something is fishy with my main hard drive, but installation is not my reason for this thread (though I think fixing one problem will remedy the other). My winbloze install is short stroked with ~50gb for OS and ~200gb for media storage. I have no problem accessing the storage from windows, but I am unable to mount the storage partition under Ubuntu. I get the following error:
Error mounting: mount exited with exit code 14: Hibernated non-system partition, refused to mount. Failed to mount '/dev/sda2': Operation not permitted The NTFS partition is hibernated. Please resume and shutdown Windows properly, or mount the volume read-only with the 'ro' mount option, or mount the volume read-write with the 'remove_hiberfile' mount option.
For example type on the command line: mount -t ntfs-3g -o remove_hiberfile /dev/sda2 /media/Laptop Storage
When I run that command, I get this: su: invalid option -- 't'
Is it possible to use the 'discard' option when mounting an ntfs-partition? Because I'm buying an ssd and I intend to dual-boot windows xp (which doesn't support TRIM) and Ubuntu 10.10 (which does).
I have installed Redhat Enterprise Linux Server 5 on my laptop. I have also installed Windows 7 Operating system on the laptop. I want to access windows 7 created ntfs partitons on RHEL 5 server. I tried installing the following rpm's on the rhel5 for accessing the ntfs partitiins.
I come from ubuntu, and, although they are all linux distros, they differ in a lot of things. Well, I just install the OS and I have a 1 TB drive for storage formatted in NTFS, I identified the device with fdisk -l, but the problem is Centos doesn't understand ntfs partition out of the box. Is there any package I need to install. I tried yum install ntfs-3g, but got an error: "no such package in repos,"
I have a dual-boot setup with winXP and openSUSE 11.2. I have both XP and SUSE partitions on a 160g HDD and then a Hardware RAID 1 array of 2 320g HDDs. The RAID arrray contains all my media/data files on an NTFS partition. For some reason SUSE shows both individual 320g disks mounted in the file system, but not the RAID array. If I attempt to browse either of the disks, I get an error and can't view them. How do I mount the RAID NTFS partition?
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
I'm trying to resize an NTFS partition on an IBM MT7977 Server. It has a Adaptec AIC-9580W RAID controller. I was thinking about doing it with a gparted LiveCD/LiveUSB, but then I realised that they won't have drivers for the RAID controller. A quick google for "9580W Linux" doesn't return anything promising.
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
I am trying to restore an NTFS partition from a backup and I need the new drive to have the old (dead) drive's UUID (which I recorded).I really really really cannot use the option of changing fstab to mount using a new UUID, for this case I need the old UUID that existed on the other drive.Is there some ntfs equivalent of tune2fs that'll let me change the UUID on an ntfs partition?
I'm trying to setup a small network between my old and new laptops to transfer my personal data. They are now linked with a crossover cable and they see each other.The old one has a dual-boot setup with WinXp and Ubuntu 9.10.The new one with Win7 and Ubuntu 9.10.I tried samba but it was very slow even using Windows in both computers: maximum transfer rates were about 1,5 Mib/sec.I tried SSH using ubuntu on both pcs and it is reliable and much faster, 5 Mib/sec. But I wanted more...I installed the NFS server on the old one and exported the NTFS partition where my data resides with sync and ro options.
I installed the NFS client on the new one and i'm able to mount the remote partition.Now, when I transfer my files I get very high speed, more than 10 Mib/sec but after a while I get a "Stale NFS file handler" error but I really didn't touch any file in the old pc and the connection is always up.Searching on the web I found that NFS had some troubles exporting NTFS partitions in the past but should be fully compatible with them since the last versions of ubuntu.
I've got a Desktop System that Automounted Two NTFS partitions in F10 so I could declare them SAMBA Shares and have my other XP and Vista Machine Access them whether my dual boot machine ran XP or F10. Now I've switched to F11 and cannot get the NTFS Partitions to Automount at boot. If I browse with COMPUTER and let the system mount the NTFS partitions once it is running the mount command returns the following output:
[code]....
I believe I need to modify /etc/fstab but cannot get the syntax correct to save my life.
I have both windows and ubuntu 11.04. In ubuntu I can mount then edit NTFS drive without being asked for permission. It's not safe that way because anyone using my computer can edit my windows files. How do I make it ask for password when mounting NTFS?
until recently, they did fstab mount quite happily, but now, they don't
the error I get is:
Code: Mountall mount /media/win7 [1089] terminated with status 21 My fstab has not changed but here it is: Code: /dev/fd0 /media/floppy0 vfat noauto 0 0 UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1
[Code]....
Oh if I make the windows drive the first avail, then it boots just fine.
Storage information: 1st primary:SG 160G ATA 100 1st secondary:WD 160 ATA 133 SATA:WD 1000 2nd primary:DVD 2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup: 1.Partition list:/boot,/,/home,swap 2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying. I solved the problem by the following way. 1.Boot with windows xp's install CD and use fixmbr on (hd0). 2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1) After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0). 3.Reboot and Press F8 for a boot menu then I can select which disk to boot. windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
I am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.
But when I run the command: # mount -r -t ntfs /dev/sda3 /mnt/windows
I get the following response: mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device
Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdc1 is already mounted on / mount failed. Not sure what happened but it worked fine till last reboot. It's a 250g NTFS drive named MEDIA device /dev/sda1. why it won't mount now.
I used Wubi to install Ubuntu 10.10 onto my laptop alongside Windows 7. I need to access my windows harddrive, however, so I used NTFS Configuration Tool to mount the drive. However, whenever I reboot, it fails to mount and I actually have to go back into NTFS Config Tool, delete the old mount, and remount it. This is tedious. My /etc/fbstab file looks as follows:
I've recently installed Arch on my main PC, and I decided to use Xfce4 desktop environment as appose to gnome that I use on my laptop. Firstly, I had to search round for an icon theme to get any of the icons working (they were all just papers with red crosses in them to start with), which I think is taking lightweight a bit too far :P, but just my opinion.Now i've got that sorted I turned to the problem of auto-mounting partitions. I'm having some trouble getting HAL to auto-mount my NTFS partitions which have my documents and music on. They are NTFS because i've got dual boot windows, and had windows before Archlinux so NTFS was the logical fs type to use. I think HAL is auto mounting dvd's etc. (can't be sure as I aren't in Arch at the minute)I can mount the NTFS partitions manually using:mount -t ntfs /dev/sda(number from 1 through 3) /mnt/sda(1 through 3)
However, I can only access this via root, so I carried out: mchmod scott.scott /mnt/sda(1-3)or something similar and that works fine, so I know they can be mounted successfully. I've tried auto-mounting them using fstab but can't seem to get this working, and I would rather not have fstab auto-mount them, I would rather let HAL sort all that out for me.I have checked that dbus, hal, consolekit and xf86-input-evdev are all installed (although im not sure what xf86-input-evdev does).Has anyone got any ideas why its not auto-mounting the NTFS partitions. My laptop mounts the NTFS windows partition fine using gnome.
I am new to Linux platform and have installed RHEL 6 on my computer. I have gone through different posts on websites regarding how to mount windows drive on to the Linux file system.Here are few results of my trial where results are slightly overwhelming for a guy like me:
1. Mounting NTFS file system using mount commandAs a su-) " $mount -t ntfs /dev/sda1 /media/MyFilesystem"
Output: error: unrecognised file system ntfs
2. I followed step by step instructions of installing Fuse and ntfs-3g_ntfsprogs but had no luck:
while using this command for the installation of for FUSE-0.9(which I guess prepares files for installation) I am getting this error : " Command use: ./configure --exec-prefix=/; make;make install"
Error: "Checking Kernel source directory.../usr.src/kernels/2.6.32-71.e16.x86_64...Checking Kernel source version.......Not found " Configure error: cannot determine the version of the Linux kernel source.Please configure the kernel before running this script.
Woooh , as u can see my Linux version is mentioned in that message so can anyone lemme know whether this issue is because of the incompatibility of Fuse with my version of Linux or am I suppose to make some changes in the command itself.
