Debian Hardware :: Laptop Hard Drive Spindown Time Is Too Short?
Apr 13, 2010
This isn't a problem with the 2.6.26 kernel that I have been using, but it is with newer ones. I want to upgrade to a backports kernel, because there has been a REALLY long standing 2.6.26 bug with cpu frequency governors and suspending that is never going to get fixed.
Basically, with the 2.6.30 backports kernel, the hard drive spindown time is way too short. I'd like it to spin down after a minute or two of inactivity, but it is spinning down after only 5-10 seconds. Is there any way to fix this? edit: Now that I think about it, this is also a problem on another laptop that runs squeeze.
View 2 Replies
ADVERTISEMENT
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Aug 31, 2010
I have a rather strange issue and maybe someone else will clear that up for me.I have an external USB disk (i am using Fedora 13 with KDE) [LG My Netbook Friend (320GB) (HXD5U32GLS)] which doesn't spin down even when not mounted and not in use. While i can turn it off with sdparm i would rather use hal (haven't seen anythin in any file in /usr/share/hal/fdi/policy/10osvendor/ that would relate to spindown time), i have looked at some forums but it is always in some rather weird hackish way like setting some specific device rules in cron.From what i gathered that udev just "points" to hal rules regarding rfkill and all the hardware. Now the question is what command would i have to add to hal's file (i guess i should copy it first to /etc/hal/fdi/policy/ right?) to enable that specific disk to spindown after let's say 30 minutes of being idle?
View 7 Replies
View Related
Mar 2, 2010
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
View 4 Replies
View Related
Aug 2, 2010
Though under Windows my Internet connection works fine and fluent under Debian linux it connects and disconnects repeatedly at short amounts of time. It didn't used to be like that but at a certain time i was forced to install pppoeconf to get my DSL internet connection going, after that even if i've uninstall pppoeconf and now i'm only using nm-applet to monitor my internet connection i still have this annoying problem.
View 1 Replies
View Related
Apr 15, 2010
I'm just wondering what the limits for time are. I have a program that always takes exactly 20 ms, so I assume this is the lowest it can measure, but I want to see if there's some sort of documentation of this.
View 3 Replies
View Related
Mar 14, 2010
I wold like to know how to turn off (spindown) SATA HDD on Debian after 10 min inactivity (using a script).I wold like to setup a NAS based on Debian. The NAS will be hallways ON but I want the NAS HDD to gos off after 10 of inactivity. When I access the NAS server the HDD should go back ON (after a small delay)
View 1 Replies
View Related
Dec 13, 2010
Installing Linux on second hard drive in laptop I hope to get a laptop with two hard drives. I like to know if UBUNTU comes with installer that would easily let me install UBUNTU on the second hard drive. And also let me select which OS to boot on startup. Win 7-64-bits will be on the first hard drive, Linux will be on 2nd / other hard drive. I prefer NOT to use Wubi to install linux in Win 7's primary partition because should I reinstall Win7 with recovery disks, it will wipe out Linux.
View 9 Replies
View Related
Apr 7, 2009
I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.
What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.
I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).
View 5 Replies
View Related
Sep 28, 2009
I have external USB hard drive of 320GB(seagate sata).It works fine but, it unmount automatically after some time.In windows it works fine without any problem. also I unplug USB cable & plug it again to mount it is there any other way of mounting it after it gets unmounted.
View 1 Replies
View Related
Dec 1, 2009
I would like to backup up my linux files to an external hard drive from a laptop. What would be the most simple and easiest way to do this? How would I format an external hard drive in linux.
View 4 Replies
View Related
Dec 30, 2009
I got a new laptop, a Dell D400. I want to swap my hard-drive from my old laptop into the new one, and did so... but then got an error stating that my CPU didn't support PAE.
As far as I was aware I hadn't actually installed a kernel with PAE enabled [as I always pick a real-time kernel for audio work]: but then read that lots of the newer distibutions are enabling PAE by default [which is what's caused the problem].
Is there an easy way of disabling PAE in the existing kernel? Or would it be easier to downgrade to another version of OpenSUSE? I'm on 11.2.
View 9 Replies
View Related
Jan 26, 2010
I am having on trying to backup my crashed laptop with ubuntu 9.10 when i double click on my hard drive, it says "unable to mount location" and it says "unable to mount location" a job is pending on /dev/sda2 when i right click on my hard drive and select mount.
View 2 Replies
View Related
Feb 22, 2011
I used unetbootin to put ubuntu 10.10 on a 2 gb usb key. I started up using the "try before installing" option and when I try to install in full it says I do not have 2.5 free gb's for the install. So I open up gparted only to find that only drive there is my 2bg usb key and I have no idea how to find my main hard drive.
I tried searching and tried the following; I checked the sata setting in the boot menu and it is IDE. The computer has also never been used in a raid setup.
View 6 Replies
View Related
Nov 28, 2010
I am trying to wipe the hard drive on an ancient laptop. The current plan is to find a live distro that can run shred or equivalent program. The problem is that most ultralight linux's don't seem to work with the RAM restrictions (Optimistically 80 MB, Worst Case 16 or less). I will likely have to just bust open the case and physically mutilate the Drive I would prefer a more 'civilized' approach (defined as one which keeps the machine in one functioning piece).
Model: Dell Latitude XPi CD
Processor: Intel (Inside) Pentium (one?) MMX
Available Media: CD, Possibly Floppy (I have access to only one other machine with a drive)
OS: Windows 95
I am having a hard time getting any farther specs. If anyone knows of a distro that has a prayer of running in these conditions I would love to know.
Current candidates:
Puppy Linux < 1.0.2
DSL (Unsure of architecture compatibility)
View 6 Replies
View Related
Mar 3, 2010
I am running Karmic on my laptop, and I have three 1.5 TB external hard drives which I swap between frequently. My problem is that if I leave the drives in, and do not access them for a period of time, they become inaccessible, i.e. I will click on the icon on the desktop or in Places, and it will tell me there is no device mounted, even though I was using it fine just an hour before.
i have a feeling that it is because the USB drives spin down after a period, and Ubuntu detects them as being 'disconnected'. Would it help if I added individual entries for each in fstab?? Or do I need to adjust some settings elsewhere?
EDIT: If this information helps, the HD's are all Seagate Expansion drives, formatted to ext4.
View 5 Replies
View Related
Jan 25, 2011
Have a seagate laptop hard drive, it spins up momentarily, makes some quiet electronic 'zipping' sounds then stops. After this, it is still reachable by the seagate utility, which says the hard drive is experiencing too many read errors, but the platters are definately not spinning.
View 4 Replies
View Related
Jul 19, 2011
Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
View 11 Replies
View Related
Jul 13, 2010
I am getting ready to install Ubuntu 9.04 on my Dell laptop, only because 10.04 won't work. I have the hard drive partitioned as C: and D: . I am keeping Windows on C: for a couple of applications that need it. I still have a few things on the D: drive. Do I need to have it completely clean and formatted? And, will Ubuntu ask where I want it to be installed or will it just take the largest contiguous space available? After the install, does the system automatically ask if I want Windows or Ubuntu or how do I tell it which system to bring up?
View 1 Replies
View Related
Apr 3, 2011
My hard drive all of a sudden starts to read and write all on its own for around 15 seconds at a time while at idle or while I am just browsing the net. At first I thought it was from cron running but I have that disabled.
View 3 Replies
View Related
Aug 11, 2010
I installed network-manager-vpnc, configured cisco vpn through NetworkManager. It works slow, but the bigger problem is that after minute or so the connection just freezes.Then I tried kvpnc. It works like it should from speed point of view. But it also hangs up after minute or two.Tried to change MTU of my wired connection to 1500 - no good.Tried to uncomment line in /etc/ppp/options "mru 542" - no good.
Created /var/run/vpnc because it was giving some error "can't open pidfile /var/run/vpnc/pid for writing".From logs everything seems fine except for "nm-dispatcher.action:Script '/etc/NetworkManager/dispatcher.d/01ifupdown' exited with error status 1." in last line. If I use kvpnc it gives no errors.SO, how do I debug this thing or does anyone knows something I don't in this case?
View 5 Replies
View Related
Nov 12, 2010
I have installed ubuntu 10.10 for a short time, now I meet a problem:I always leave for lunch and leave my computer without turning off. When I get back, it shows a window. after I input my password, I enter my system.Then It halts, the only thing what I can do is moving mouse. After halting for nearly one minute, it resumes to normal.I hope someone can tell me what happens.
View 2 Replies
View Related
Jun 15, 2010
I am wondering if pthread could make that a single thread keeps the "mutex" all the time if the time it remains unlocked is very small.
thread1
{
while (1)
{
lock; do_task(); unlock();
[code]...
I experiment the thread2 never getting access to the mutex and never printing the nice message. I would expect that once thread2 calls "lock", it would get the mutex as soon as thread1 calls unlock() but it does not seem to be the case. If I add a sleep of some microseconds (100) in thread1 after unlocking the mutex, it solves the problem.
Does anyone know if this behaviour is normal? Is there a way to configure my mutex so that thread2 receives it when unlocked?I use
pthread_mutexattr_settype(&att, PTHREAD_MUTEX_RECURSIVE_NP);
pthread_mutex_init(&handle, &att);
to create my mutex. I am running ubuntu 9.04
View 3 Replies
View Related
Oct 4, 2010
I have a Toshiba laptop that seems to be freezing on extended operations involving the file system/hard drive. (that's kind of a guess on my part). The system has frozen during the last day or two when I:
- try a large file operation with Nautilus
- try exporting a large video file from Kdenlive
- try formatting the disk for a new install of Maverick (I decided that with the new version almost out, I might try upgrading in case I broke my system)
What I see is the screen freezing and the mouse does not move. As I said, I tried installing the Maverick RC from the Alternate CD (I wanted to do a minimal install). The install hung on the partitioning step and the caps-lock key started blinking (though I don't get this in other cases). I have booted into my Lucid live-cd and a Puppy live-cd to try Gparted, with the same results - the system freezes (but the caps-lock key doesn't blink). Puppy HAS performed better generally, for example I was able to complete my large file operation (backing things up!) but it is freezing on the partitioning step.
View 5 Replies
View Related
May 3, 2011
With most Linux distributions, I can only get a short range to connect my laptop to the wifi. However, when using Ubuntu 10.10, this issue seemed to cure itself and I was able to use wifi in my room. I recently installed Ubuntu 11.04, but suddenly my wifi issues have come back again - I can only connect if I am near my router.
I am using an Intel Wifi 5100. I should also note I can get a wifi connection if I boot into Windows 7.
View 9 Replies
View Related
Feb 14, 2010
I think this might be related to the changes to using udev or DeviceKit. It started when I was running the beta versions of F12. Then it crept into Debian Sid. And my Arch Testing and Gentoo also suffer from the same.
What happens is that I'll be working along. Then when I press any key it is as if the SHIFT key is pressed. When I press CAPSLOCK, some of the keys react as they would normally. This never lasts for more than 5 minutes. And seems to happen infrequently. I say seems because there are the times I am at work and it could be that the same thing is happening only there is no one on the keyboard.
The reason I pick out udev/DeviceKit is that when it used to happen to F12 beta, the other distros had not yet made the move. So back then it was only a F12 issue. Now it is happening across the board. And only started recently.
View 3 Replies
View Related
Jun 10, 2010
I am backing up data from a remote server onto a local ntfs partition. It seems that the rm -rf and cp -a commands are taking a long time to complete in what should be short, incremental backups.Has anyone had similar problems when backing up to an ntfs partitionHere is my rsnapshot.conf:
Code:
#################################################
# rsnapshot.conf - rsnapshot configuration file #
[code]....
View 5 Replies
View Related
Jun 26, 2010
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies
View Related
Apr 9, 2010
I updated Fedora 9 yesterday. I rebooted earlier and now the desktop starts for a very short time then disappears followed by a window opening and closing for a few goes. After this nothing! YUM does not work, neither does Firefox! A bug report informed me there was a Python problem but I can find no reference to this anywhere.
View 1 Replies
View Related
May 20, 2010
Has anyone got Ubuntu 10.04 working on their Dell Inspiron 1100? Most of the time, the screen goes black a short time after boot. Sometimes it goes black right after the splash screen, sometimes I get to log in and then it goes black a little later. Same results when trying to boot into "safe graphics" mode. Ubuntu 7.10 works fine on this machine (although I had to do some special configuration in xorg.conf to get it to work way back when I installed it.) However, it does not appear to be possible to manually configure X in 10.04. I tried disabling the splash screen in grub based on suggestions I found for other Ubuntu versions, but that had no effect on the problem.
Is it possible to replace X with the most recent version that could still be manually configured? Would anyone know how to go about doing that?
Alternatively, if it's impossible to get this old machine to run new versions of Ubuntu, has anyone had success with (relatively) new versions of other distros on it?
View 9 Replies
View Related
