I created a bootable USB using iso image of slackware 13.1 (By using Universal USB installer). Now when I run setup, how do I choose the source of installation as USB drive? I suppose that can be done.
View 6 Replies
I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.
View 1 Replies View RelatedI'm now up and running on slackware 13 x64. I have noticed that the version of Python installed was 2.6.2 but there were a lot of bug fixes between this and 2.6.5. What is the best way to get 2.6.5 running on my machine. Do I have to install from source or is anybody aware of any packages that have been released?
Again, I'm not too familiar with package management systems on Slackware as I have always installed from source but this became a bit of a bind recently as updating software to newer versions involved a lot of hard work. Can anybody give me an ideas on the packaging systems available, the best ones to use, and where I can find information about the packages related to the package managers?
I have been given the task to install slackware 13.1 over windows. I have downloaded and copied slackware 13.1 on to a disk, and rebooted the computer, but i am not getting what all the tutorials have shown. I have been looking for tutorials that specifically instruct me as to how to install slackware 13.1 on to a windows xp. I am not trying to dual run I just simply want to run slackware and slackware only.
View 5 Replies View RelatedWhen i install slackware12 on xen,no matter in http or ftp,there is always a error as follows.
[root@lx xen]# virt-install --prompt
What is the name of your virtual machine? slk
How much RAM should be allocated (in megabytes)? 1024
What would you like to use as the disk (file path)? /xen/slk
How large would you like the disk (/xen/slk) to be (in gigabytes)? 10
What is the install URL? http://10.1.71.247/slk
[Code]...
How should I go about installing alsa and making it start on boot?
View 14 Replies View RelatedI'm trying to install the latest version of Flash in Slackware 13 on a 32 bit machine. Adobe seems to have rpm and deb installers, but there's no TXZ. Normally, tar.gz wouldn't be a problem, but the package they have there only contains a shared library. No installation script, no readme, no nothing. Further, the SlackBuild is for an outdated version, and the installation doesn't work.
View 11 Replies View RelatedI have a problem with the cyrillic and writing in Bulgarian in text files (In the Pidgin I have not problem). I saw that if I install the windows fonts this will resolve the problem, but I can't find slackware package and even source package.
View 4 Replies View RelatedI have just been forced into upgrading my mother board and cpu so now own a x86 cpu and was thinking i would give the x86_64 Slackware a try. I realize that i need to do a reinstall but can i save my /home partition? Will that save my settings or am i asking for problems? I assume i can just drop all of my config files into the new install as well.
View 4 Replies View Relatedhas anyone installed slackware on a sheevaplug?
View 6 Replies View RelatedIt seems there's no support for the KVM virtio modules in the Slackware install kernel.
May I suggest that these be added to the next version of Slackware?
Or am I perhaps missing something?
I'm back to slack after several years. I'd like to install wine. I have downloaded wine-1.1.33.tar.bz2[URL]..I am currently looking at the installation instructions. I would welcome any advice, comments or caveats that might contribute to the installation. In particular, have I made the
correct download? Another example: My preference is that the installation be made to /usr/local, since that directory is on its own partition. Will that introduce any problems?
I'm using Slackware 13.1 and am trying to install KmyMoney from SlackBuilds. For some reason, I get the following compiling error:
Code:
Scanning dependencies of target kmymoney-handbook
make[2]: Leaving directory `/tmp/SBo/kmymoney-4.5.2/build'
make -f doc-translations/it_kmymoney/kmymoney/CMakeFiles/kmymoney-handbook.dir/build.make doc-translations/it_kmymoney/kmymoney/CMakeFiles/kmymoney-handbook.dir/build
make[2]: Entering directory `/tmp/SBo/kmymoney-4.5.2/build'
/usr/bin/cmake -E cmake_progress_report /tmp/SBo/kmymoney-4.5.2/build/CMakeFiles
[100%] Generating index.cache.bz2
[Code]...
It seems like this error is related to some handbook or translation documentation? Is there some dependency I'm missing? (There shouldn't be according to SB). Or is there a way I can block compiling this documentation in the build script? I tried commenting out "set -e" in the build script, but the resulting packing wouldn't run after I installed it.
is it possible install on slackware ?
[URL]
I have ati radeon hd2400, I downloaded drivers from ati's site and install it on mu laptop. How to install compiz on Slackware 13.1 (x64)?
View 5 Replies View Relatedi have a freebsd server configured with ssh2 and a slackware client and another freebsd client on the freebsd client i use the ssh2 command to connect to the server and it's ok on slackware i can't use simply ssh and i can't find the correct slackbuild with ssh2 and sshkeygen2
View 4 Replies View RelatedI have an ISO of 13.37, I have selected the ISO as the booting medium in the Virtual Box and I do get uptil the screen where one is supposed to select the source media. Because I am installing from an ISO what option I am supposed to select out of the 6 present there?
View 4 Replies View Relatedwhat is the best way to install Eclipse PDT on Slackware 13.0 64 bit?
View 2 Replies View RelatedI installed almost the complete install. I left off Apache, MySQL and PHP since I wanted to do them myself (which I did and it went fine). I selected KDE as the window manager but now I want to try xfce. When I boot up, I'm left at the command prompt and have to login (probably does that for everybody) then I run startx. That brings up my KDE. Are the xfce components installed and can I use something else to bring up that desktop? Or can I install it and then bring it up at the command after login?
View 12 Replies View RelatedI have a laptop with broken ubuntu and windows 7. I want to replace ubuntu 10.10 with slackware 13.1. If I was to just install it over the top would the slackware bootloader (lilo?) Replace the ubuntu one(grub?). Because that would make my life easier.
View 3 Replies View RelatedI am completly new to Linux and managed to download slackware 13.1 iso and burn it to disk 1 and 2.I installed disk 1 and set the laptop up fine but it could not find disk 2. I can burn again but do i need to burn in a certain format or as an iso? also i do not know how to get linux to read a cd or mount it?
View 14 Replies View RelatedAfter reading quite a lot about this distro, I have come to know that Slackware doesn't provide tools for managing dependencies. So how do I take care of dependencies?
If there's already a thread regarding this, please redirect me to that particular thread.
How exactly do i do it, I can't find any clear step's on it?I got no CD-R's left and can't get to the shops.
View 4 Replies View RelatedI installed Slackware 13 last night and have been trying to get bittornado to properly work. Some background info, I have my partitions set up as follows:
Partition 1: /
Partition 2: /usr/local
Partition 3: /home
Partition 4: swap
I unzipped the tar.gz file and made a package using makepkg, and then installed it. Afterwords, trying to run "btlaunchmanycurses" or "btlaunchmanycurses.py" doesn't do anything. Further examining shows me that it installed the package to my / directory. Shouldn't packages be installed somewhere in my /usr dir? I'm new to linux, I spent some time with it a couple years ago but haven't done anything since.
I need to use a GPT partition table and tried installing Slackware(64) 13.1. But it reported that there were no partitions when the disk did have about 10 partitions in the GPT partition table. The MBR partition table was set up with the protective entry that is normal with GPT.
I did a test install using just 2 partitions, initially pointed to via an MBR partition table, and later changed over to a GPT partition table pointing to the same sectors, with the protective MBR, and Slackware boots up and runs just fine.
The lilo command also works just fine. I tried it because I was not sure if it looked at the partition entries, and it would be a critical piece to keep the system running. when Slackware will have GPT support? GPT is required for partitions larger than 2TB or starting after the 2TB line. There are now 3TB drives out, and RAID arrays much larger than 2TB have been possible for years.
I am in need of some more clear information about compiling and installing various applications in Slackware. I mean, i am not that new in Linux world, but i am not used to having to check for dependencies on my own and making Slackware packages myself. Things i would like to know more about and would be these:
a) is there some magical way you use to find out what dependencies a package has? I would appreciate as much information in this field as much as i can get. As now if i download source of some application i have completely no idea about what it needs from my system to function properly or where to look for this information. I think there should be more "correct way" than goggling for it...
b) I know about nice site SlackBuilds.org that it is, but lets say i want to install application A, and there is written, that application A requires application B, which requires application C, and this one needs application D. So now i have to spend good half of a day getting and compiling dependencies for one application, i mean common there has to be a quicker way to do this... at least some tool that would let me build some kind of ques that would be processed automatically or some kind of trick... So if you know some focuses under your sleeve, then please oh please do share
c) I would also like to know more about optimizing Slackware for boot time and general performance (but it's not that important, there are a lot of walls of text about this in Google world).
I have tried a few times now with sbopkg but I cannot get monodevelop installed.
All the dependencies install and compile correctly but during the compile of monodevelop it keeps bombing out.
This is on slackware 13.37 32bit
This is the error:
Code:
I mean like, what does it do differently from just installing something from source? Check to make sure you have the required dependencies before compiling the .tgz package? something else?
View 12 Replies View RelatedI'm trying to install Slackware package into some specific locations, like for example, I want to put Linux base package into at / and put applications on /usr/local. However when I'm installing using "setup" program, I cannot find a part that let me to choose the installation destination.
At "setup install" option, it gives six different installation method like full, newbie, menu, expert, custom, and tag path. But none of them (I cannot find it) gives an option where to put the installation package to.
