Fedora :: Keyboard & Mouse Not Available In X?
Jan 11, 2011
I've got a problem with input devices not being available under X.
I've installed F13 with 'minimal' type, i.e. no desktop environment.
After a lot of struggle, I managed to install quite a few packages (after configuring network!) and the Nvidia (proprietary) driver, disabling the nouveau driver.
I got to mention that nvidia installer offered me to create a xorg.conf on its own with its drivers configured for X. But the thing is if I type X or Xorg the screen turns black meaning that X is running but I don't see anything. Looking at /var/log/Xorg.0.log, I see this message:
AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
Then, later on, i installed gnome thinking it'll take care of these input devices but the same happens in the gnome login screen too. Both Keyboard and mouse are not working.
I've tried adding the Option "AllowEmptyInput" "off" or Option "AllowEmptyInput" "false" in my xorg.conf under both the input devices section and also the server layout section, but all in vain.
I'm sure I'm missing some setting or something. I've also looked at a few bugs logged in the RedHat bug DB but their resolution of setting the AllowEmptyInput to false doesn't work in my case.
View 1 Replies
ADVERTISEMENT
Jun 11, 2009
I'm having an issue installing Fedora 11. The install goes fine, but after restarting (when I get to the initial configuration screen) my keyboard and mouse don't work. I can boot into the Live CD without issue. My boot.log file is below:
boot.log:
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [OK]
Setting hostname Ste-PC: [OK]
mdadm: failed to add /dev/sda1 to /dev/md/imsm0: No such device or address
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: Started /dev/md126 with 2 devices .....
HAL is failing to start, could that be the issue? If so, how should I go about fixing it?
View 14 Replies
View Related
Aug 11, 2009
I have Fedora running a 1 HDD and have just added two more hard disks to the machine and have told the BIOS to raid them. however when the login screen appears neither the keyboard or mouse work! during the boot process everything is fine and booting into Single User Mode works...
View 2 Replies
View Related
Dec 22, 2009
Picked up a Linkskey KVM (LKU-UA02) from my brother for free, thought I'd put it to use. Works fine but after switching between each machine once, the keyboard/mouse does not work. Tried unplugging the device(s) and the KVM itself from each machine but no luck.Not a huge issue, but it would be nice to use the KVM (right now I have to use VNC to get a similar effect).
View 1 Replies
View Related
Feb 28, 2010
I've configured my F12 system to go to sleep when idle for a period of time and so far everything has been working out well except that it appears that the USB ports are completely dead with the system is put into sleep. I can't wake it using keyboard or mouse. only with the power button. Anyoen else experience this or know how to allow sleep from keyboard/mouse?
View 14 Replies
View Related
Apr 14, 2011
I'm currently running Fedora 14 on an ASUS laptop and I'm looking for a recommended Wireless Keyboard and Mouse.
View 3 Replies
View Related
Nov 10, 2009
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
View 8 Replies
View Related
Aug 19, 2009
I am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
View 1 Replies
View Related
Aug 22, 2009
I installed Fedora 11 on an external usb HDD (StoreJet trascend) connected to my Acer AspireOne (110 L), and it has been working marvelous for over a month. Today, something really strange happened: After I choose the booting media (StoreJet trascend) Fedora 11 freezes on the loggin screen: Both, keyboard and mouse, stop working. I have no idea what services are shoot down or not recognized since the start screen starts with the blue and fedora logo one.
View 5 Replies
View Related
Jun 1, 2011
After upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 7 Replies
View Related
Jun 15, 2009
I'm having trouble installing F11 x86_64, and I'm sure it is something to do with the video card.X will not even start if I have both nvidia quadro FX1700's installed. If I take one out, I can install F11, but it always 'hangs' when it starts X (which is to say, both the keyboard and mouse are locked - until I press the power button, but then it shuts down anyway).I've fiddled inittab so it starts in runlevel 3 so I can at least get in and tinker. There is no xorg.conf in /etc/X11, so I assume the system is building it's own and not quite getting it right (guess work based on other threads with similar symptoms).
I can connect to the system from another Linux machine via ssh, and I can ftp to it. I tried copying the xorg.conf from the other machine, but while it changed the screen resolution (ergo, it had some effect), it still went nuts. Starting X remotely via ssh allowed me to trap the messages, which indicate the lack of HAL has something to do with the problem.service --status-all reports hald stopped; I'm assuming this should not be the case. I've used yum to reinstall hal, but that made no difference. Nor did an update - it was already at the most recent level.F11 was installed from a DVD downloaded vai a bittorrent; the disk checked out ok.
My knowledge is limited, and I don't know what should be in xorg.conf for my machine, although I could type it in from scratch or ftp it across from here. It was 'okay' under F10, happily tolerating both video cards. But it seems to be sulking under F11. In case it matters, I'm doing everything as root; since firstboot starts X, I can't use that to create another userid.
- nomodeset, xdriver=vesa, selinux=0, remove rhgb as boot parameters - all to no avail (although these changes seem to be ignored for the most part anyway);
- start the HAL daemon manually (mine failed to start, as others have reported). It didn't like that! (the output is available, but is enormous)
- startx -configure - simply failed;
- dirconf didn't work;
- I've tried swearing at it during start-up, which turned out to be no more or less successful than anything else, but it was fun.
Intel Q6600 64 bit. Twin nvidia Quadro FX1700 cards (one removed for the time being) driving two 1920x1200 monitors each. Please let me know if there is any other relevant information I can supply.
View 5 Replies
View Related
Sep 21, 2009
recently i tried to install for the first time and everything booted up fine but when i got to the post install configuration my mouse and keyboard don't work! after that one time whenever i try to load linux it just sits at the boot screen where the colored bar goes left to right and has fedora text in the bottom right corner. i don't know if this matters or not but i'm dual booting with windows XP also i tried using a live cd of fedora 11 it always boots up to the login however just like above i can't use my mouse or keyboard for that one either.
View 8 Replies
View Related
Dec 21, 2009
so, last night i checked my e-mail, jumped on facebook for a minute and went to bed. i got up this morning and my computer seemed frozen; no mouse/keyboard, no network visibility.....nothing. the screen was just frozen. tried too ssh into it to reboot, but the network wasn't up on it. i had to hard reboot. NOW, it just reboots forever....and ever....and ever. i have a WinXP partition on there along with my F12 and that wont boot either. selecting a previous kernel does nothing either. it wont even boot off the F12 install DVD. just keeps rebooting. I've never had this happen to me. so, it seems like a hardware thing to me, but i dont know if its my mobo or the drive. i suspect a mobo issue as the drive still spins up and gets me to the grub menu.
View 2 Replies
View Related
Apr 8, 2010
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies
View Related
Jun 17, 2010
I'm running Fedora 12 on a Shuttle SN78SH7. Updates are all current from the Fedora repositories. I'm using the Nouveau driver for the Shuttle's on-board Nvidia graphics adapter. At random intervals (1 to 5 times per day), my USB keyboard and the buttons on my USB mouse stop working and the desktop freezes (i.e. GKrellm graphical data stops updating, partially painted windows don't complete). However, I can still move the mouse pointer around the desktop. This only seems to happen when I am actually using the computer from the console. It has never happened while the system was turned on, but not being used.
When the mouse and keyboard stop working, I can log in from another computer via ssh. Once the computer gets in this state, the only way to fix things is either to reboot remotely using ssh or to cycle power. I've run low level hardware diagnostics - everything checks out OK. This computer only has USB and firewire inputs. No PS2 jacks.
View 1 Replies
View Related
Sep 12, 2009
I am running Vista on my C: drive and I just got Fedora 11. I planned to dual boot Vista and fedora 11. I Downloaded the Live CD from the site (680 +- MB) and burned the files IN the .iso file to an empty DVD and CD. Shrank my D: drive and now have about 27 GiB wort of unpartitioned space. I booted from the Live CD. everything went OK until i chose Boot from the Boot Menu that came up. First it took me to a screen with the following message:
ACPI: expecting a [reference] package element found type 5. and then in went on to boot normally. Then when it reached the user login screen, I found that my mouse and keyboard were'nt responding and that there was no lights on any of the keys. I checked the USB cables and did a hard shutdown and booted from the Live CD again, but the problem persists.
View 5 Replies
View Related
Jan 23, 2011
Today my keyboard and or mouse repeatedly stop responding some minutes after boot. Currently the mouse stops responding after a few seconds of movement immediately after boot. Yesterday I used the machine most of the day, yet this issue didn't arise. Today I used it for a few hours before the issue developed. I did a full system update from the fresh install yesterday night. It's therefore possible that this issue has arisen as a result of the update, and that today the onset was delayed for some reason.
Earlier today I had the same problem with the keyboard. I replaced the batteries thinking that this was the cause. Now it looks like both keyboard and mouse are affected by the same problem. When the mouse stops functioning and the keyboard remains active, I unplug the mouse and replug it in, but it still does not respond, and only the unplug, and not the replug, are detected and logged in dmesg. I noticed ever since I installed Fedora yesterday that plugging in new usb devices after boot did not result in them being recognised, and that if I unplugged a mouse or keyboard and plugged them in again they would not work (requiring a hard reset). Currently the machine isn't usable as I cannot use the mouse for more than a few seconds. I haven't tried a PS2 connection, and currently I have keyboard access.
Hardware:
Fujitsu LZ945230BH1 USB Mouse
Microsoft Arc Bluetooth Wireless USB Keyboard
Running Fedora 14.
I haven't tried PS2. My keyboard and mouse appear to be working again (25 mins and still responsive).I unplugged all USB devices except for the keyboard, mouse, and wifi dongle. This appears to have solved the problem. Other devices that were plugged in were a USB to SATA external HDD caddy (powered off), and a serial USB connection to a Sheeva Plug computer (mini server). how I can use all my USB ports in future without this issue arising?
View 1 Replies
View Related
May 29, 2011
Have just upgraded (14-->15) using the dvd option; installed the nvidia driver (I think) and am able to startx and get to the Gnome 3 desktop (Wallpaper and top "task" bar look correct)..But, the mouse and keyboard have absolutely no affect. No matter what I click on, or what keyboard combination I use, nothing happens..(Have spent the last 3 hours researching it; and just seem to be getting nowhere.. I can do anything I need to from the CLI; but am not sure what to do..
View 14 Replies
View Related
Jun 11, 2009
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies
View Related
Dec 2, 2009
If I remain 'connected' (with the KVM) to the linux machine the gnome screen saver cuts in and the system remains 'as is' until 'woken up' with the mouse or keyboard. However, if I switch to another machine using the KVM, within a short time (maybe even minute or two) the linux machine goes dead. Now it has not crashed, as I can log in from a remote machine and do anything I need from a terminal, but the machine seems not to respond. I can't even use ctrl-alt-fn to switch to a console screen.
I initially tried entering telinit 3 from a remote machine but it made no apparent difference. However, if after telinit 3 I then killed the Xorg process and later issued a telinit 5 the X server restarted, but with a curious black 'notch' at the top of the screen. I am using an NVIDIA GeForce 7600 GS graphics card. I am now adding the backtrace from Xorg.0.log. It seems that when the KVM switches to another machine for more than a very short time the X server crashes.
[Code]....
View 2 Replies
View Related
Dec 7, 2010
I've been using Slackware for ages... since like 1997 or 1998. I have a Slackware 3.x CD around here somewhere. I'm usually the one explaining how Linux works to everyone else. I even got GnuCash working on Slackware. So these two problems ...
1. Keyboard in Xorg. It seems to work, except the down arrow and the page down buttons are mapped as something else (the down arrow causes TEXT TO DISAPPEAR...I've had to type this like three times now...). After a bunch of searches, it looks like a problem with HAL and evdev (whatever that is). I tried setting the model in KDE's Regional control panel but that had no effect.
Xorg.conf settings for this section... you can see some remnants from prior attempts:
I did check that event1 refers to the keyboard. The keyboard is a Microsoft Internet Keyboard that works fine; the arrow keys work great outside of X.
2. Mouse in Xorg. The scroll wheel wants to scroll side to side instead of up and down. This also happens to be a Microsoft product (I like their mice... my wife brought the Microsoft keyboard into the relationship...). It's just a wheel optical 3-button mouse, nothing special. Again, none of my usual xorg.conf edits seem to work; here's what I have right now.
Again, I checked that the mouse is event2.
Someone really should make an upgrade guide for people like me that have been using it for years and aren't really following the tech that explains new features like hal and evdev (I know hal has been around for a couple versions, but I've never gotten involved with it until now). Or maybe there is one and I'm just not aware of it. Basically I just want it to just work, which is why I use Slackware in the first place!
I should mention I did have both working under Slackware 13.1 on this machine until Windows conveniently erased my root partition for me, so I got to do a completely clean Slackware install for the first time in a LONG time. That's when the issue arose. Because I was in a rush, I did a full install. I assume the previous setup was using non-hal/non-evdev methods, but I might as well set this one up using the new methods, right?
I'm using Slackware64 13.1, running on a Core 2 Quad Q8300 @ 2.50 GHz. Hardware is fine - both mouse and keyboard work under Windows XP, and like I said the keyboard is fine outside X. It has to be some configuration problem ...somewhere.
View 11 Replies
View Related
Aug 29, 2011
For some reason I am unable to use either my keyboard or my mouse. No problem in etch up until now, even after rebooting.
View 1 Replies
View Related
Jul 8, 2010
I can't seem to use my mouse and keyboard at the same time.I am running Ubuntu 11.04 64-bit
View 3 Replies
View Related
Sep 5, 2011
I have downloaded the latest Ubuntu.iso and extracted it to /tmp/ubuntu/ on my laptop. In the folder isolinux there is an isolinux.cfg file. I am trying to prepare a USB stick by modifying those files, so that when I boot from USB it opens VNC and puts a static IP of 192.168.1.125. How can I enable VNC and a static IP so that from my laptop I can do the installation of Ubuntu 11.04 without using a keyboard or mouse?[URL]..
View 1 Replies
View Related
Jan 7, 2010
I know that by pressing CTRL+SHIFT+NUMLOCK I can use the number pad as a pseudo mouse, but is it possible to force this condition at boot without needing to enter a key press?
(I'm putting a computer in my car running Ubuntu and have decided to do away with both the mouse and keyboard and control it from a joystick on the steering column. This has been wired to the circuit out of an old keyboard to mimic the arrow keys on the numeric keypad.)
View 2 Replies
View Related
Feb 3, 2010
I m using wireless keyboard and mouse with my PC. I have installed Win XP and Ubuntu both but I login in one at a time. In windows lower panel shows if my caps lock and numeric lock are on. but this is not so in case in Ubuntu. how to display same in Ubuntu panel.
View 2 Replies
View Related
May 12, 2010
I just upgraded from 9.10 to 10.04 using the distro upgrade feature. Everything was upgraded without errors.
However, my mouse/keyboard now freezes after 10+ minutes of use. Both are unresponsive, and the keyboard lights does not change with the use of caps-lock, etc.
The system didn't crash though. I had a download running which was completed despite the mouse/keyboard hang.
The computer is barely usable now, I really wished I didn't upgrade...
View 2 Replies
View Related
Aug 8, 2010
I'm having some weird problems with my mouse and keyboard. I'll be moving the mouse and keyboard about and all of a sudden the keyboard won't respond and the mouse moves and is fully working, but it seems to be a problem with the desktop, more then the mouse, because it'll highlight stuff and certain stuff will open when I click them, but when I go down to the toolbar, and try to click applications, places, and system, it'll highlight it but not respond when I click it. This happens about every 45 Minutes, to 1 hour of time with ubuntu running [10.04] [Additional details]
- I'm using an HP Pavilion Dv6000 Laptop, 64 Bit Ubuntu 10.04
- My drivers are all up to date
- Could it be because my Laptop gets really hot? But it dosen't happen ever when I'm running Windows, so I'm not so sure about that.
View 2 Replies
View Related
Sep 27, 2010
what I can do to configure one of the keys in my keyboard to act as the left click? having mouse issues at the moment.
View 5 Replies
View Related
Oct 9, 2010
So my computer was slow with Karmic Koala, so I tried upgrading my build to Lucid Lynx 10.04.
Now I can't login because neither my keyboard nor mouse (and touch-pad) work. However, I can access the command mode (terminal?) though through the grub boot menu.
how I can get my mouse (and touch-pad) and keyboard to work with Ubuntu 10.04? My machine is an Acer Aspire 4730Z. I dual boot with Windows 7, and I'd prefer not to have to clear out the partition for Linux and reinstall.
View 7 Replies
View Related
