Do I have a printer installation utility I can access through the shell? I tried installing/configuring my parallel port HP DeskJet 712C through CUPS using xfce but they didn't list my printer.
View 3 Replies
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies View Relatedcpuid utility is not compiled with U9.04 and the utility is not available as a package with synaptic -
other distributions have it available as rpm . url
Any way to run this utility in the Debian world?
Usability? Home: you use bash. Work, school, vacation, seminar: you're stuck using zsh or tcsh (or Drush in Drupal).
Function: Without giving errors, quietly cross-checks a non-shell command for its equivalent in the running shell and executes that command, properly-syntaxed.
Name: Well, as the word "imperative" in rudimentary linguistics is a synonym for "command," I thought of an acronym derived from the terms SHell Imperatives Translator. But this morning, I re-thought the lavatorial acronym. Considering it was a "container" of "hooks" that had the potential to operate much like a stripped-down cron or Ubuntu hook bundle, a more polite term for it would be "tacklebox".
I have a couple of large-format printers (Epson R2400, HP 9650) which I only use infrequently. If they are not used very often, they dry out, the print heads get packed up, it's an expensive mess to deal with when times comes to run off some prints. The printers are physically connected to a Windows machine to which my Ubuntu computer is networked.It would be helpful if there was a utility that could initiate a test page print job on the machines, which could be scheduled to run once a week or so. I've had no luck finding such a thing for Windows
View 9 Replies View RelatedI'm using timeout core utility in my bash shell script. The problem I'm facing is I want the PID of the command which is supplied to timeout. Let me explain with the code I'm using:
Code:
#!/bin/bash
timeout 120 ./prog1 &
[code]....
I run the following command for disk duplicating from one source to 5 destination harddisk.
dc3dd progress=on conv=sync,noerror iflag=direct bs=262144 hash=md5 log=sda_log.txt if=/dev/sda | tee >(dc3dd of=/dev/sdb) >(dc3dd of=/dev/sdc) >(dc3dd of=/dev/sdd) >(dc3dd of=/dev/sde) | dc3dd of=/dev/sdf
When I run the command in shell prompt it is working fine. But I want to write a shell script for this task. When I wrote and run the shell script it gives the error message syntax error near unexpected token.
I have a users, that log in from a terminal. They should not have any shell access, so currently their login script, at the end, starts the program that they use, and after that program ends, the login script moves on to log them back out. The problem is, they could press ctrl+c, while the login script is running, and it quits the login script and spits them out at a shell prompt. -- Is there any way I can prevent this?
View 4 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedI work for AT&T and our Windows-centric workgroup is being tasked with supporting an app running on RedHat. To help my coworkers, I'm building a Fedora 11 VM that we can play with to familiarize ourselves with the UNIX environment.
Because of corporate network policies in place, my VM can't get access to the Internet.
Since we're AT&T employees, we're naturally using the korn shell on the production system. I'd like to install the korn shell on my VM. However, it doesn't appear to be part of the base fedora repository.
Is the korn shell available for Fedora? If so, how would I copy it to shiny media, mount it on my VM, and install it?
I have installed Kubuntu 10.04 x64 from scratch using the alternate installation CD and unfortunately I'm experiencing some serious troubles. Everything worked fine, installed packages, moved my backed-up data to my encrypted /home partition - until I rebooted. Usually I reboot the system right after the installation process to see if the boot process shows any errors, but what can I say, seems like I forgot to do it this time .
The problem is that the boot process just "hangs" right before the login window should disappear. By "hang" I mean dead: no switching to virtual terminals, no CTRL-ALT-DEL - the system just freezes.
I'm quite familiar with doing things shell-wise, so I started the "Rescue Mode" from the alternate CD and was able to mount my root partition.
Problem #1: No faulty log entries whatsoever: dmesg, boot.log, messages etc. all looking fine - except Xorg.0.log. I suspect the proprietary Nvidia drivers to be the culprit here, because what I'm getting is: "Caught signal 11 (Segmentation Fault). Server aborting"
Running "startx" as root from the rescue shell gives the same results: complete system freeze. "Looks like a reinstallation candidate, let's just backup my data" I thought, which brings us to
Problem #2: I can't mount my encrypted /home from the rescue shell. The exact steps involved are:
Mount my root partition and chroot to it. Issuing "ecryptfs-mount-private" gives the following error message: "ERROR: Encrypted private directory is not setup properly" Becoming my user "su - faulty" and trying step 2 again yields the same results. I feel like I'm almost there: I'm executing commands in my root environment, just can't seem to access my data which I'd like to backup before doing a clean reinstall. Any thoughts?
How to remove the blueman utility in kde from slack 13.1?
View 2 Replies View RelatedWhat's a good back up utility with a scheduling feature that can back up to a network hard drive? I'm backing up to an NTFS formatted external that is connected to my router and I would like the files to be backed up individually so they can be browsed by other PCs (Windows & Linux) on my network, as opposed to a disc image or archive like some back up programs.
View 9 Replies View RelatedI've looked all over the place for the utility that will create a bootable flash drive. Can anybody tell me what the name of it is?
View 11 Replies View RelatedI have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies View RelatedIs there a way to make the (router's) USB port to work in OpenSUSE? I have a external HD were I would access files from when connected to the router with the shareport utility but it only works on windows. I was wondering if it could work in wine? And how could I do it?
And how can I make a network? I have never made a shared connection between computers. I don't know the correct term but I would like to share files with my brother and sister which I just converted from Ubuntu
My USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies View RelatedI'm setting up a netbook for somebody (in another country!) and one of the last hurdles is the printer setup. I only have the netbook and not the printer with me. I know that the printer is a HP PSC 1215 All-In-One Printer but there seems to be a Catch-22 that I need to have the printer connected in order to be able to set this up using the GUI tools. How do I work around this? As a minimum I just want to enable printing, although scanning would be a bonus.
View 1 Replies View RelatedI only see two options in KDE. System settings which shows nothing relating to printing and Office Org printer administration.In the latter Office org printer admin shows "generic printer"..My printer is HP 5P. and I choose the option 5P/MP.Then next step asks me to: enter a command line for the appropriate device. I don't know what the appropriate command is. Can anyone help I leave it empty and click next. It shows the 5P/MP is now listed along with generic. I make it default and send a print command resulting in "error while printing".
View 3 Replies View RelatedI'm attempting to add an additional partition through KDE's Partition Manager, but my RAID 0 is not recognized by that program. I'm wondering what partition utility is used during *buntu installation, as this properly recognized my RAID 0, and I was able to successfully manipulate the partitioning scheme.
View 1 Replies View RelatedI just installed Win 7 In VB and was wondering how can I access my printer in it?
I installed the drivers, but when I turn the printer on it doesn't register in Win 7 (VB)
After an update to fedora 10, I cannot access my bluetooth printer any more.
I used to run hcitool to discover the printer, which still works
Code:
In the printer configuration, I used to enter a URL like this Printer URL bluetooth://000CF606C08A/
Note, the "bluetooth" protocol is not offered any more in printer setup.
I read that Fedora 10 comes with an updated BlueZ 4 package, which has an improved gnome applet.
Code:
The applet discovers the printer, but fails pairing with the device. There seems to be short flash up of a pincode error message (which I cant read).
I've been using blurtooth printing with no problems since Fedora 6.
How to configure bluez cups printing on Fedora 10?
Using Ubuntu 10.04
I am trying to use the network printers shared within my University's AD domain. In Windows XP, I simply went to 'run' and typed "\[domain]", then it asked for my ID and passwords and list of printers came up from which I could just pick and add to my printer list. How can this be achieved in Ubuntu 10.04?
What I tried:
System->Administration->printing->Add->Network Printer -> Windows printer via Samba -> Browse, then I see the domain but when I input my id, domain name and password, access is denied...
I recently installed Xubuntu 10.04 on a desktop computer. Everything works fine aside from the fact that I can't access my Dell 3010cn network printer. The printeis accessible and work flawlessly with every other computers running XP, Vista and Ubuntu 9.10I installed the drivers and configured the printer with the exact same parameters as on my 9.10 laptop. The thing is that the printer is always "offline" as if my computer could not connect to it. Also, when I try to acces its options via its fixed IP adress (192.168.1.107) through Firefox, I cannot reach the printer. However, the printer responds to every other computer in the house.What am I doing wrong? Is there a firewall in 10.04 that keeps me from accessing to the printer?
View 1 Replies View Relatedi am using ubuntu 9.10.i want to access printer which is installed in windows xp.
View 5 Replies View RelatedI need to access the shell prompt rather than GUI of Ubuntu. I have installed Ubuntu in Microsoft Virtual PC 2007 Sp1 wherein installation is successfull. Now i have downloaded PuTTy to my WinXP Desktop. So by what IP can i connect with Ubuntu Shell. How to configure IP in both Ubuntu and in Windows XP so that this will look like i am accessing the shell remotely.
View 8 Replies View RelatedIm want to know the command to add a user with no shell access so they cannot log onto the system, but there a user on there so for example they can be part of the email server.
View 2 Replies View RelatedI am looking for a secure way to backup data from user's computers ( Linux/Windows ).My needs :
1. Secure
2. Per user backups
3. Windows/Linux compatible ( server will be Linux only )
4. Incremental backups
My preferences :
1. Rsync
Things I can not do :
1. Give out shell access ( forget rsync -e ssh )
2. Use a protocol that takes too many ports ( my box is behind my router ).
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I use a network-connected HP printer through hplip and cupsI'm trying to discover how to access the media card ports that are built-in on the printer. Q1: Is there some way that my linux workstations can mount or otherwise access these flash-media cards?If not, then,Q2: Does anyone know about a network-connected, shared resource, multiple format media card device?(My wireless router has a USB port for shared things, but I think
View 6 Replies View Related
