Slackware :: Could Not Start Android Emulator In 13.1
Jan 31, 2011
I installed android SDK together with eclipse Helios 3.6.1. I downloaded and installed all android package and setup a virtual device in android 2.1 (then 2.2, 2.3). However, when I click "start" device in "android SDK and avd manager", the dialog appear and then close, but nothing happen more. I also try to run it from console by change to tools directory of android SDK and run, but it also not work, there is only one line of desperate result: "Segmentation fault". I also try to add "-no-audio" as many forums advice, but it just keep the result segmentation fault.
My device I configured to have 32MiB of SD card (and I tried 16MiB or more also). I also created the helloworld application, then try to start it, but it just stop at "Launching a new emulator with Virtual Device a2" (a2 is name of my device), and nothing more happen, I also added "-no-audio" to run configuration but I still there. By now, I have not seen any virtual devices appear. I also tried to uninstall and install again all the packages of android, but nothing help. Here is the screen when I use GDB to figure out where is the fault:
Quote:
tqminh@kemsiro:/mnt/sda9/android-sdk-linux_x86/tools$ gdb emulator
GNU gdb (GDB) 7.2
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
[code]....
View 9 Replies
ADVERTISEMENT
May 4, 2011
I installed everything and am running android OS on Ubuntu (using androidphonedriver guide). The problem I'm having now is that I don't know how to install android market application to be able to install other apps like opera etc.).
View 1 Replies
View Related
Dec 7, 2010
I am using Ubuntu 9.10 .I recently updated my eclipse to get latest android 2.3 sdk but after that I am not able to run android emulator with the message
Code:
android /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.11' not found (emulator)
After a
Code:
ldd -v installed/android-sdk-linux_x86-1.6_r1_1/tools/emulator
I got
Code:
installed/android-sdk-linux_x86-1.6_r1_1/tools/emulator: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.11' not found (required by installed/android-sdk-linux_x86-1.6_r1_1/tools/emulator)
linux-gate.so.1 => (0x0096d000)
libutil.so.1 => /lib/tls/i686/cmov/libutil.so.1 (0x002c3000)
[code]....
View 9 Replies
View Related
Jan 10, 2010
I am running Ubuntu 8.10 Intrepid. The only shortcoming for me is not being able to download audiobooks from my library. The OverDrive Media Console is required to download and play the audiobooks. I noticed that the OverDrive Media Console is now available for Android. So, my question is, if I download the Android SDK Emulator, would I be able to run the OverDrive app with the emulator? I have downloaded the Emulator, but I need to do so more reading to get it installed and running.
View 2 Replies
View Related
Jan 15, 2014
I downloaded the ADT bundle for android development and whenever I try to boot an Android Device Emulator either from the eclipse version included in the bundle or from the command line, everything freezes for 1 minute and then a logout from my current Debian user session occurs. In other words, the Debian login screen appears again and all my previously opened applications get lost.
Not even when I run from the command line I manage to fetch any error notification.
I use:
- Debian Wheezy
- kernel 3.2.0-4-686-pae
- jdk1.7.0_09
I tried
./emulator @mydevname -no-boot-anim -show-kernel -shell
but I get the same result: the debian user session restarts
View 2 Replies
View Related
Jan 21, 2010
Is there a way to set up profiles for X terminal emulator such as one can do with konsole? and if so, can they be configured to launch at xfce startup?
Example
Tab called "mutt".
When tab is opened, mutt is started.
Tab starts when xfce starts terminal emulator.
FYI:
1)Using slack 13.0
2)Comfortable with command line, vim and command line tools.
3)Python programmer (and some shell)
View 6 Replies
View Related
Aug 3, 2010
I downloaded the emulator called pSX so i can play my playstation cds in my computer. on my laptop i have slackware 12.2 installed.
The dependencies for the emulator are:
opengl
gtk
alsa
gtkglext
libxml
I found the appropriate packages for all of these (with the exception of opengl, I assume that means it's preinstalled, correct me if I'm wrong) and installed them. the emulator runs, at about a quarter the speed it's supposed to. I get no error messages in the terminal, just the huge speed drop. has anybody else gotten this emulator to work fine in slackware?
View 2 Replies
View Related
Apr 29, 2011
My installation of IBM5250 was successful in Natty but I am unable to start the emulator. Below is the error I am getting.
Ibm5250
5250: [ INFORMATIONAL ]: Build Date: March 2008 (1.6).
5250: [ DEBUG ]: RegistryInfo::WhichKeyboard(): Could not open file /etc/X11/XF86Config or /etc/X11/xorg.conf.
5250: [ ERROR ]:
***** There are no fixed or scalable fonts unavailable *****
***** Session not starting. Please verify that the 75 and 100 DPI *****
***** fixed fonts are installed.. *****
***** The xlsfonts -fn "*-*-medium-r-normal--*-*-*-*-m-*" command *****
***** will list the available fonts. *****
Segmentation fault
I installed all the dependencies like (libmotif3,libstdc++5,Ms fonts,)
View 2 Replies
View Related
Mar 1, 2011
I know this is strictly a KDE problem, but I don't want to create another account anywhere and get the KDE spam, etc.
But if anybody who reads this list has the ear of (or is) a KDE person, a minor bitch with KDE in 13.0 and 13.1 is that if you were using Konsole terminals at the time of shutting down KDE, when next you start KDE, it replaces them with Terminal Emulators.
View 11 Replies
View Related
Jul 10, 2011
Setting up my slackware system for prime use, i downloaded robby's xfce 4.8 package and upgraded xfce 4.6. Later i downloaded slackpkg and upgraded all my packages for the first time. When i did a restart, xfce 4.8 had gone back to xfce 4.6. I just went back to the directory where i was storing all the xfce 4.8 files and did the upgrade again, it worked; now for some reason though my terminal emulator no longer works, as regular user and root. I get an eroor saying, failed to execute terminal emulator. Input/output error.
View 3 Replies
View Related
Apr 8, 2010
I try to kick off dolphin from regular user account after executing "su -" from terminal emulator inside KDE, but got a error:
Code:
Is this something to do with xwindow authorization?
View 9 Replies
View Related
Nov 30, 2010
I've got myself and Android phone, and I'd like to be able to compile from source ON my phone (I want to be able to run some command line tools like eyeD3, lame, etc.). Problem is, how do I get GCC on my phone with such limited resources? The Android platform isn't exactly meant for developing on. Another option would of couse be compiling on my PC using a cross compiler, but I'm a newb when it comes to that
View 1 Replies
View Related
Jan 31, 2010
Okay, when I load epsxe it loads just fine and I got it playing playstation games BUT the audio doesn't work. I have this issue with Basilisk II and it never got solved. When I load the epsxe executable I get
Quote:
View 8 Replies
View Related
Apr 9, 2010
I've just got a nice HTC Desire (ie almost the same model as the Nexus One), and it can work as a modem for accessing the internet. After googling this, I've found out that on debian it works straight without adding any package, just as the pjone is connected. This is not the case on slackware 13... Has anyone got this to work already?
View 8 Replies
View Related
Jan 11, 2011
I opened KPackageKit in my new Fedora system. I want to get wine. The description says "A Windows 16/32/64 bit emulator". But wine stands for Wine Is Not an Emulator.
View 2 Replies
View Related
Feb 22, 2010
KDM does not start after upgrading my Slackware-current 32bit to KDE 4.4 using Alien Bob's packages.
In syslog I get:
Code:
What am I missing? (I used the exact same procedure on a 64bit Slackware-current installation and everything works beautifully)
View 5 Replies
View Related
May 7, 2011
Actually, Slack64 runs just fine under VirtualBox on my old HP under WinXP, But the installer for Slack86 won't boot under VirtualBox on my Toshiba Netbook under Win7 starter. I tried updating the 13.1 install I have on there, but I get the same kernel panic when I try to reboot that. It always bails just as it is switching over to the new kernel. The dump fills my screen so I can't see the actual error. How can I capture that initial startup log? Slack86 runs just fine on my old Compac Armada 1700 (266PII 92M/12G), but that's a very different environment.
View 10 Replies
View Related
Feb 18, 2011
Slackware vers: 13.1
Netbeans vers: 6.9.1
JDK version: 1.6.0_24
Code:
#
# A fatal error has been detected by the Java Runtime Environment:
#
# SIGSEGV (0xb) at pc=0xb2d772fd, pid=2766, tid=2953837424
#
# JRE version: 6.0_24-b07
[code]....
I tried reinstalling both JDK and Netbeans to no avail.
View 11 Replies
View Related
Mar 9, 2011
After I upgrade my slackware to current(kernel 2.6.35.11),X could not start.My video card is ATI Radeon HD 4570.and I do reinstall fglrx like old ways :
Code:
./ati-driver-installer-11-2-x86.x86_64.run --buildpkg
and
Code:
installpkg fglrx-*******.tgz
But after restart, X could not start,and Keyboard does not respond. Also ,when I try init 3 and remove xorg.conf,The X can start with a low resolution(1024X768).In console mode,I got a high resolution(1366X768). So,is there a confict between fglrx and new kernel or What have I done Wrong?
View 11 Replies
View Related
Jun 5, 2010
Is there a way I can tell the system to boot up KDM when the system is booted up completely?
View 1 Replies
View Related
Jan 19, 2010
Kde does not start after slackware 13.0 instalation. Mouse just stop and the computer freeze. When I type startx Kde try to start, but everything stop. Does anybody know what could be this ? What log should I look ?
View 3 Replies
View Related
May 18, 2011
I have upgraded from 13.1 to 13.37 on three PCs. No problems on 2 of these (home server and laptop), but on the third machine (main Desktop, where most KDE customisation had been done of course), KDE refuses to start for the main user (me). It will start OK for root and xfce will start OK for me, so X is OK with the updated NVIDIA driver that I have also installed. The KDE splash screen starts up and four of the five splash icons come into focus, but the fifth one never does. Some disk rattling goes on for a while but then ceases.
I have tried renaming the .kde folder and .kderc but this has not helped. Are there other KDE config files that I could try renaming / removing? Or are there log files / error messages somewhere that I should consult.
Obviously I am not in a position to change any KDE system settings from the KDE application.
Just tried KDE with a newly-created user and it's the same as with my user - no desktop. So KDE is only starting for root.
View 6 Replies
View Related
May 23, 2011
Hardware - Compaq615, video - radeon hd 3200 After clean installation of 13.37 x64, proprietary ati driver, multilib. xfce.
All was o.k., video rendering was direct etc., etc. then i rebooted, and system freeze at startx. Ctrl-Alt-Backspace not working, hard reset needed. I tried xorgconfig, Xorg -configure, aticinfig --initial, deleting /etc/X11/xorg.conf with no result at all. /var/log/Xorg.0.log empty. When i do startx from root - all is o.k, writing from root now.
View 14 Replies
View Related
Mar 19, 2010
I normally boot into runlevel 3. KDE is my default DE. I use
Code:
To open KDE. I would like to give the other DE's (full install of Slackware current) a fair try, but I am having trouble starting the other DE's from the command line. They all work from runlevel 4 using the kdm chooser, but that's just a hassle and in all honesty will likely irritate my lazy-bone to the point of not using them on a regular basis.
Booting into runlevel 4 isn't a good option because I am frequently experimenting and booting to the command line makes troubleshooting easier. What do I need to do to be able to start the other DE's in runlevel 3?
View 11 Replies
View Related
Feb 18, 2010
I'm wondering if anyone knows of a CDROM emulator that runs on Linux. I want to emulate this configuration:
[CDROM DRIVE]----USB CABLE----[COMPUTER UNDER TEST]
Where [COMPUTER UNDER TEST] is a computer that boots from a physical CD inserted into the [CDROM DRIVE]. Only instead of the [CDROM DRIVE] I want the following configuration:
[CD IMAGE BUILD MACHINE]-----USB CABLE-----[COMPUTER UNDER TEST].
I want to build an ISO image on the [CD IMAGE BUILD MACHINE] and have some sort of USB CDROM emulator running on it to serve up the ISO image to the [COMPUTER UNDER TEST] as though it was talking to the [CDROM DRIVE]. Does this exist? If it does, I can't find it. I want to do this so I can test out bootable CDs without burning a lot of coasters.
View 2 Replies
View Related
Jul 5, 2010
I've had enough with Windows and decided to try Ubuntu, I'm slowly getting used to it a bit and finding my feet a little but my big problem is: I have an Iphone and I'm only keeping Windows currently as I can't get iTunes to work on Ubuntu. I've looked online for 'how to' vids ect and I have found many things yet none of them tell me in simple terms how to do it. Do I need to run a emulator of a mac os? Run iTunes in Wine?
View 2 Replies
View Related
Jan 23, 2010
I can only start my Internet connection from the root bash. If i type pppoe-start/pppoe-stop in my user's shell it just says "command not found".
Any way to permit the users to bring the ppp connection up and down ?
View 1 Replies
View Related
Feb 26, 2011
I installed Netbeans 6.9.1 with JDK bundle, I have installed jdk in /usr/local/jdk1.6.0_2 but when I try to start Netbeans I get error
Quote:
which: no javac in (/usr/local/jdk1.6.0_2/bin:/usr/local/jdk1.6.0_2:/usr/local/sbin:/usr/local/bin:/sbin:/usr/sbin:/bin:/usr/bin)
which: no java in (/usr/local/jdk1.6.0_2/bin:/usr/local/jdk1.6.0_2:/usr/local/sbin:/usr/local/bin:/sbin:/usr/sbin:/bin:/usr/bin)
Cannot find java. Please use the --jdkhome switch.
I have javac in /usr/local/jdk1.6.0_2/bin, I looked. I installed last time and it have worked fine. What is wrong now ?
View 3 Replies
View Related
Mar 27, 2010
I've just install Slack 13 and had been looking into the website for configure info. What is my problem is the #xorgconfig does not start on my system. It says command not found. I had searched for answer on the web and found no answer so I post here for help. Is there anything else I need to install to get my intel graphic card display more then 1024 resolution?
View 7 Replies
View Related
Jul 23, 2010
I just installed conky. What is the best way to get it to start when X loads? I am using KDE.
View 3 Replies
View Related