Slackware :: CIFS Not Supported By The System
Jan 7, 2011
i am using Slackware 13.1 with my customize version of kernel:
# uname -a
Linux dash-pc 2.6.33.4 #1 SMP Thu Dec 30 15:28:19 CET 2010 i686 Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz GenuineIntel GNU/Linux
I compiled into kernel CIFS module and now i am still not able to mount SAMBA directory.
# mount.cifs //192.168.0.101/music /home/dash/music
Password:
mount error: cifs filesystem not supported by the system
mount error(19): No such device
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
[Code].....
View 4 Replies
ADVERTISEMENT
Mar 15, 2011
I want to move to Slack, so I took a look around the web to see if it can give support to my wireless card but couldn't find any relevant info.Is it supported? Can be installed?
View 14 Replies
View Related
May 14, 2010
I have mounted a iomega file system on a cetos os machine using
mount.cifs //filserver-ip/directory /home/my-home/mounted-file -o
user=username
(** mounted as root) The mounting works fine.
The problem arises when I try to create a sub-directory inside the mounted directory. All the newly created sub directories become write protected.
I am accessing this file system from R software and it needs to write/create directories in side this mounted directory.
how can newly created sub-directories will become automatically writable, so that R can create new sub-directories and write data inside those directories.
View 2 Replies
View Related
Jun 29, 2011
This issue has already been discussed on this thread: [URL]. But it's 1 year old so I wanted to know if any of you had other ideas. It seems to me that [URL] is quite a good choice indeed, but I want to be sure before I engage my company with it. So for you who are using linode, are you all happy with it?
If they allow having a Slackware guest, and is not too "g33k" (like this one which is NOT an option) because I need to make my colleagues confident and they are a bit scared of having a service only for hackers. In fact I need to reassure them even with linode, they're scared to death because I want a Slackware server ...
View 3 Replies
View Related
Jan 4, 2010
While I try to add Blue Marble widget I get this error "OpenGL shaders not supported". It's weird considering everything else on kde works great and my laptop configuration is Dell Core2Duo T 6500 2.1Ghz. Should I install any extra packages to make it work?. Also any tips/suggestions/links about improving the look and appearance of Slackware would be most welcome.
View 6 Replies
View Related
Jan 7, 2011
I am running Slackware Linux-13.1. Recently I noticed that alsaconf has stopped working: when I run it all I get is:
Code:
However, sound works just as good as it did before I noticed the problem. The issue is present both with the generic kernel and with any custom compiled one.
Here is some diagnostics with the custom compiled 2.6.37:
Code:
Code:
View 5 Replies
View Related
Dec 1, 2010
I am receiving the following error when trying to enable Compositing in Desktop Settings for KDE4 in openSuse 11.3-Xen
Code:
Error: Compositing is not supported on your system. Required X extensions (XComposite and XDamage) are not available. I want to have desktop effects enabled but can't seem to figure out how to get this done. "Advanced" Tab is greyed out. "Enable desktop effects" is greyed out.
[Code]...
This worked to get X up and running in the Xen kernel. However, I'm pulling what hair I have left trying to figure out how to enable compositing in Xen. The entire motivation for my upgrade was this one feature (amongst some other things).
Please show me where I'm going wrong. I hope this is not a "live with it" type of scenario due to my using Xen.
View 1 Replies
View Related
Jul 29, 2010
I am having a problem running CentOS 5.4 in VMware which have appeared with the following error.
View 4 Replies
View Related
Aug 21, 2011
I downloaded OpenSUSE today hoping I could install it on my aging computer, a Pentium 3 1.3GHz, 512MB RAM and a 3dfx Voodoo 5500. When booting into the live CD, I cannot get it to go to the installation. After the GRUB screen (Or whatever is used) to choose install, I just get a black screen. Is 3dfx not supported by OpenSUSE?
View 8 Replies
View Related
Feb 24, 2010
There is a centralized FTP server which are accessed by clients to develop some web development project and to achieve this the clients are using ftp service. The problem is when they are trying to copy any files and directories they are getting the following error: "Message reported from the file system: FTP copy not supported,use move instead"
I've checked all the permissions and they are all OK. I don't know why this is happening. they can create and move files and folders but can't copy files and folders.
View 8 Replies
View Related
Aug 28, 2010
As I understand the rc.wireless script the command 'iwconfig wlan0 nickname ....' is always executed. On my computer this causes annoying message "Set nickname: operation not supported". I read the man for iwconfig. It seems for me that there are no particular reason to force the 'set nickname' operation.
View 2 Replies
View Related
Jan 13, 2011
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
View 1 Replies
View Related
Jan 14, 2011
pls delete this post if I should not do this as it is included in [URL]..How do I recover from the 99 error when I start my system? I can only get to my Slackware by booting into it from the Slackware DVD.I have re-run lilo but I keep getting the 99 error on start up.
View 10 Replies
View Related
Mar 11, 2011
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
View 4 Replies
View Related
Jan 31, 2010
I'm running Ubuntu 9.10. I want to make a backup copy of my install using Partimage. Where it say's to name your file, I put "U9.10backup". Just get an error message "The file system of [/dev/sda1] is [-unknown-], and is not supported". What am I doing wrong here? Also, don't I need to backup the swap as well?
View 5 Replies
View Related
Apr 4, 2010
I am creating high CPU load on my system. Many large and huge files are copied between internal and external hard disks, and at the same time I am doing some office work and have a bunch of photos processed in a batch job.Looking at the system monitor, I can, however, see, that both CPU cores of my dual core processor are used heavily. But RAM beyond 2 GB is rarely used. Typically the maximum used RAM is 2 GB, no matter, how many files are copied and so on. Is this normal? I think, some of the tasks could be accomplished a lot faster, if the available RAM was used.
View 2 Replies
View Related
Jan 19, 2011
The reasons are long, but I want to mount an external cifs share and reshare it using NFS.I've gotten as far as mounting the CIFS share using SAMBA, but I get an error when trying to share that directory with NFS-Kernel-Server.When I restart the NFS-Kernel-Server, I get the following error.Quote:*Exporting Directories for NFS kernel daemon...exportfs:Warning: /share does not support NFS export Is this something that is possible?
View 1 Replies
View Related
Mar 4, 2010
Where is the system locale set?When /etc/profile is run it sources /etc/profile.d/lang.sh which sets envar $LANG but /etc/profile is only used by login shells so -- AFAIK -- modifying $LANG in /etc/profile.d/lang.sh will not change the system locale for processes started by the boot scripts.There are no *locale* files under /etc./etc/inittab has nothing about locale.man init has nothing about locale.man 7 locale describes locale.h and its usage.man 5 locale describes the format of locale files./sbin/init (as investigated using the strings command) may call nl_langinfo but man nl_langinfo only describes how to query the locale, not where it is set.
View 6 Replies
View Related
Oct 29, 2009
My system just shut itself down as I was using it. I'd like to try to understand why.
First, I noticed there are 1 to 4 messages per second in my messages.1 through messages.4 files in /var/log going back to September 27. It probably started before then, but I don't have older logs.
There almost nothing else in the messages log but these messages, millions of them. They look like these:
Quote:
Then just before shutdown, there are a few dozens of these:
Quote:
And then right at the end, a switch to runlevel 0. I did not initiate that. Something else did. And finally a dbus-daemon segfault.
Quote:
What other logs can I look at?
View 5 Replies
View Related
Mar 8, 2011
I save my whole system to a .tar.gz file weekly except for the /proc content. I have used this backup a few times to restore my system without issue.
Last time I restored, I discovered the following 2 issues I home somebody can explain:
#1: while extracting the .tar.gz using tar xzvf filename.tar.gz, I get the following error near the end of the restore process "tar: Incorrect Length". This error only occurs when I boot the system with the slackware 12.1 disc 1 CD. It does not occur if I try to restore from my working system, same file. Other than this, everything seems to be restored properly and the system boots up properly. I am just concerned by the meaning of this error.
#2: After restore, I do lilo -C /mnt/etc/lilo.conf to make sure the systems boots up properly. This works... however, I have discovered that just this won't make module autoloading work after the restore. When booting the restored system, no module autoload !
I have correct this by just entering setup when booted up using the slackware 12.1 disk 1 CD and going thru addswap, set target without format and the going thru the configuration menu and cancelling all question.
Why would modules not load automatically ?
View 4 Replies
View Related
Mar 31, 2011
The dynamic static package on skype is a 32 bit package, how can I get this to run with my 64 bit system?
View 9 Replies
View Related
Jan 23, 2011
I want to switch from my windows xp computer from Slackware Linux for my home pc.I use world and excel software and videos as well to watch movies how can I open my Ms office files in it? Does Slackware support yahoo messenger with voice ? What is the system requirement for slackware,the Ram,Processor and hard disk space for its latest version?
View 14 Replies
View Related
Nov 26, 2010
I'm trying to set up my system to act as a vnc so I can access it remotely via a vnc viewer on my android phone. I've never tried this before but from what I've found online, with KDE4 a lot of the usual vnc server programs won't work correctly. Anyone have any tips for getting it to work? It doesn't necessarily have to be vnc. If there's an alternative method to remote control of a computer, that will work too.
View 5 Replies
View Related
Apr 13, 2011
OpenSuse 11.4. LibreOffice any versions and Infra Resource OpenOffice can not open any DBF files from smb/cifs shares. At the same time he can write DBF to smb/cifs normally, but after saving it he can't open it!
Any other documents - no problem! odt, xls - any! but not DBF.. And this problem is only on OpenSUSE 11.4 and only in Libre/Open Office! Any other programms can open and write DBF files to smb/cifs shares.
View 4 Replies
View Related
Feb 10, 2010
I mount windows share with pam.(cifs) When I logon I receive:
CIFS VFS: No response for cmd 50 mid 61462
CIFS VFS: No response for cmd 50 mid 61461
CIFS VFS: No response to cmd 46 mid 61460
View 1 Replies
View Related
May 27, 2010
I am attempting to set up autofs on Ubuntu 10.04 so that it can automatically mount cifs shares when wifi is connected. For some reason, it isn't working. First of all, I know the share is accessible because doing this works fine:
Code:
sudo mount.cifs //192.168.0.12/share /cifs -o credentials=/etc/samba/credentials
This is in my /etc/auto.master
Code:
/cifs /etc/auto.home --timeout=60 --ghost
And this is /etc/auto.home
[Code]...
View 3 Replies
View Related
Jun 22, 2011
I`m using cifs to mount a windows 2008 server share. I`m mounting it read only and using an rsync script which works quiet nice.
Recently I couldnt mount the windows share anymore, i didnt know the account iam using would go inactive if i never logged in.
Just where does cifs write a log if it can`t mount a windows share? If I knew where it is it would also be easier to find the reason if it doesn`t work.
View 1 Replies
View Related
Jan 28, 2010
I have one NAS device and using samba share one folder without password, how can I use command mount -t cifs to mount this share folder? I tried the below command, but always popup password checking?How should I do mount this folder without password checking?
View 3 Replies
View Related
Mar 15, 2011
I am trying to image about 30 laptops with WinXP, and I am using Clonezilla and DRBL for the task. We will start migration to Win7 starting Q4, so for now we are still using XP. I used a Clonezilla live USB to capture a standardized image to a CIFS/SAMBA share on the enterprise file server. The file server does not support NFS. To deploy the image, I used Virtualbox to build a VM with Centos 5.5 and then later Ubuntu 10.10. I mounted the CIFS share to /home/partimag but I found that I cannot share this CIFS mount out as NFS so I was unable to deploy the image with the image still residing on the CIFS; I had to copy the image to the VM's local drive.
Now using the DRBL live distribution, which is Debian based, I was able to obtain the image from a CIFS share and then share it out to the clients to be imaged as NFS (I think). I was able to use the DRBL live for some older computers, but since that hasn't been updated in nearly 2 years, I think it's missing some device drivers for my newer machines so it doesn't work on them -- this is why I looked at using CentOS and Ubuntu. To mount the CIFS shares, I'm using the following command:
mount -t cifs -o user@domain //share_ip_addr/share_name/folder /home/mount_point
Do I need to do something different to enable the mounted CIFS share to be shared out as a NFS share so that the clients to be imaged can see the contents from the CIFS share as a NFS share? The below image depicts my setup. The workstation has two NICs. The 10 network is the enterprise network and the 192 network is for DRBL imaging only. DRBL/Clonezilla does PXE boot and leases DHCP for the laptops. The laptops are shielded from the enterprise LAN; I am not doing any kind of NAT on on the server. The Linux VM is built with dual NICs and are set to bridged mode so they appear to be a separate NIC from the VM host on the network even though they going into the same port on the wall. [URL]
View 4 Replies
View Related
Oct 1, 2009
Greetings. I cannot get autofs to mount a CIFS share. I tried to follow http://wiki.centos.org/TipsAndTricks/WindowsShares .
a) Windows share is \server-01Share
b) user: backups, password: backups has READ access to this share
c) mount -t cifs //server-01/Share -o username=backups,password=backups /mnt/server-01 WORKS FINE
d) Note that most default Centos services (including all NFS stuff has been disabled on boot, if this makes any difference)
e) /etc/auto.master:
left default configuration including (should these be changed or rem'd out?:)
/misc /etc/auto.misc
/net -hosts
#added at end of file
/test/auto.test
f) created /test and /etc/auto.test
#auto.test
#note I tried rw and just r
test -fstype=cifs,rw,noperm,user=backups,pass=backups ://server-01/Share
g) ls /test = nothing
e) message log contains automount:..."lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master"
View 15 Replies
View Related
