When trying to "startx" the machine goes to a black screen and just sits there. Only a hard reboot allows me to stop it. After SSHing into the machine and typing "startx"
[Code]...
I left slackware 13 with airodumb and airplay executed in console for 6 hours. When I got back, konsole had something similar to "packet has length error". I could open the packet using aircrack -m option, but when i shut down the OS, it didnt shut down properly. Now when I do startx black window stays forever. I tried pkgtool and change to KDE but the same happens.
View 4 Replies View RelatedRedhat Ent Linux ES Release 2 (Taroon 8)
Kernel 2.4.21-4.ELsmp
startx(1): initialize X session - Linux man page
I thought I'd look into methods of recovering from a lost password for future use, how to change the passwd and shadow should I need to. So I started an X session, vi'd my .swp files then logged off. Perhaps I changed one of these files accidentally, but my intent was just to view them which I did. After starting up my computer the next day and logging in I began an X session - "startx". The session appears to have started, but with a black screen and an active mouse cursor.
I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen
View 13 Replies View RelatedI installed backtrack4 (ubuntu based) few hours ago and i am facing a problem in getting into the graphical mode(live cd)!, hence I tried to check and run it in a "safe graphical mode" and unexpectedly it works fine! but when I switch to 1024x768 resolution in the same live cd ,and then when I type startx it just produces a black screen! After doing some research on finding a soultion to this problem I found out that this go to do some thing with editing the xorg.conf file! but when I type xorgconfig,it shows an error saying command not found!
sudo dpkg-reconfigure xserver-xorg command just talks about the keyboard!
nothing interesting on graphics or screen section!
resource: intel corporation 828456/gl 128 mb
How to modify the xorgconfig file.
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
View 10 Replies View RelatedI have just installed slackware. I have done
Code:
Xorg -configure
And chosen kde for init program while installing slackware. But when I type
Code:
Xorg -config -retro
or
Code:
startx
I get black screen with blinking button on monitor and keyboard. Obviously KDE doesn't start.
I put Slackware 13 and the scenarios is:
1. I start the computer and after startx I got black screen, the keyboard is not responding the led of the display is yellow etc. Now I reset the computer,
2. Booting Windoze
3. Choose Restart not Shutdown from Windoze
4. Booting Slack
5. startx works fine, the X server is starting and working great.
I have Radeon 9500. I configured X server with 3D accel over 2500 FPS on glxgears. The same problem persists even with X server VESA configured.
I'm having a pretty serious problem, whenever I try to boot into Ubuntu the screen goes black, I see a flash of purple or violet and then i get a prompt asking for my login credentials, afterwards I'm stuck with a terminal trying to start the gui... I don't know what I'm doing wrong, fresh install tried to reboot after getting the display driversinstalled idk if that could be a problem. I tried to commands in the terminal already:
startx
sudo service gdm start
return = start: Job is already running: gdm
afeter installing ubuntu studio 10.10 a black login screen after login it asking me to type a command i've typed '' startx '' but it does't work
View 2 Replies View RelatedI'm running debian (AMD64 dist), and I recently upgraded via aptitude to KDE 4.3.4.After the upgrade I found that I could no longer start X (using startx from my user account).I am, however, able to launch kdm from a root command line and log in as a user to X this way (graphically).I want to run startx as a user and I cannot figure out where the hangup is. I've looked in my Xorg.0.log files comparing .old to current and nothing stands out. After I launch 'startx' the screen goes black and the computer waits. I can hit ctrl-alt-f2 and bring back the text-mode terminal screen; it's at a point where it looks like X is working. From there, I can control-c it and get back to the command prompt.
I'm thinking this is a software configuration thing but I don't know enough about how all the systems tie together to figure out where the problem is.
Few days after installing Ubunto 9.10, during installation of gstreamer, the installation utility got stuck, and with it the whole desktop icons. (I think the gstreamer has nothing to do with it). When I tried to execute some icon, like the terminal, it will not open. After restarting the computer, I get a tty1 login terminal and not the graphical one (tty7). When pressing Ctrl+Alt+F7, nothing happens. It switches to a black screen. "sudo startx", gives some error log. I already reinstalled the X-server, ubuntu desktop and other stuff.
What can be the problem? Is it related to my video card (nvidia 7600 GT)? I didn't install any nvidia specific driver. This happened to me earlier and I reinstalled Ubunto. I think maybe I should move to some other distribution.
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies View RelatedI want to put:
xmodmap -e "pointer =3 2 1"
somewhere in the startup. It seems creating an .xsession is the solution. But after I create a .xsession file in my home folder, the next time I run startx the screen just turns black. (And only for a short while can I switch to another virtual terminal, before that too becomes impossible). After deleting the file it runs OK again. I'm not using any login/desktop manager. I use IceWM on Debian Squeeze. Is there some script/import that has to be present in the .xsession file, or is something else going on? Also I'd like to know what I should do when I get a black screen. Turning off the PC is such a crude method
I'm running RHEL 5 on a dell server. Recently, after some updates were installed, the server hangs when trying to start the gui (its set to run level 5)to get into the login screen. I can boot into run level 3 but get the same issue when I startx. CTRL-ALT-BackSpace doesn't return me to the command prompt. I get a blank screen with two letters and a blinking cursor. Which direction or log files to look at to start the troubleshooting.
View 2 Replies View RelatedI'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies View RelatedI turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedi just installed ubuntu 10.10 in my e-machine d730z, intel pentium processor P6, intel hd graphics, 2GB DDR3, 250 GB HDD. After installation im getting a black screen http://img684.imageshack.us/i/img05711m.jpg/.'m still new with ubuntu and by the way, after a minute, the screen goes black. i cant see the text.
View 1 Replies View RelatedI have been working for the last three months with Ubuntu 10 on a destop. Doing just fine and loving it. I decided to try a new position for the toolbar that sits at the top of the screen. I did a right click and moved it to the right side of the scree, didn't like the look of that. Right click on the bar and moved it to the left, didn't like that either, so moved it to the bottom. having done all that I thought I could put it back at the top but alas, I can not right click on the Toolbar.
It seems as though the two bars are fighting each other at the bottom of the screen.I would like to go back to the default position at the top of the screen. I do have a terminal window available to me on the desktop so if I could find out the command line to type in, I should be able to reset my tool bar. Being new I have no idea what this command would be.
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies View RelatedI've been a happy Arch Linux user for years now. Recently, on my eee 1000he (an Atom netbook with intel GMA graphics) I've been seeing strange things. After it has been on for some time (usually hours), the screen starts to jitter, just for a fraction of a second, every now and then. After this has happened some times, the screen goes black (one time it went red). The backlight is still on and I can still ssh to the machine which reacts normal appart from the black screen. I can only regain the screen when rebooting. What could this mean? Is it hardware or software? X logs don't shown anything weird, where should I look? I haven't found anyone with the same problem on the net.
View 4 Replies View RelatedCan someone recommend a free clock that sits in the taskbar and is easy to install. I am using Mint 11 but for some reason the clock does not show.
View 9 Replies View RelatedCUPS was not originally installed on my server, I have installed it but cannot print to my network printer. On my laptop, I can... they are both running the same version of Debian. What could be missing?
Here are some details...
I have two computers running the same version of Debian. One is a server with no GUI and the other is my laptop with GDM installed. My laptop (which prints with no problem) is connected via Wifi. My server is connected directly to the router via Ethernet. I cannot print from the server.
The printer is a Canon Pixma MP495 that connects to the router via Wifi. I have downloaded drivers for the printer from [url] and installed them successfully using dpkg on both computers.
Right now I have a regular text file that I am using for a test page. To print from my laptop (with success) I type:
Code:
This does not work from the server. What could I be missing?
lpq run on server:
Code:
lpinfo readout:
Code:
Having slackware 13 after executing startx it gives me white screen. Heres log:
Code:
kephald starting up
XRANDR error base: 159
RRInput mask is set!!
RandRScreen::loadSettings - adding mode: 59 1024 x 768
RandRScreen::loadSettings - adding mode: 60 800 x 600
RandRScreen::loadSettings - adding mode: 61 640 x 480
RandRScreen::loadSettings - adding crtc: 57
RandRScreen::loadSettings - adding output: 58
Setting CRTC 57 on output "VGA" (previous 0 )
CRTC outputs: (58)
Output name: "VGA" .....
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
"akonadiserver" crashed too often and will not be restarted!
No battery found.
This is not a laptop, quitting ...
<unknown program name>(26219)/: Communication problem with "korgac" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "
QProcess: Destroyed while process is still running.
Graphic card is intel 82865g
Video driver installed is 2.9.0 from robby workman,
Kernel is 2.6.32.3 generic
I recently installed Slackware 13. But every time I run startx I get my XFCE screen & it hangs up. Command line works absolutely fine.
View 6 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedJust installed CentOS 5.5 in text mode because the GUI mode keeps hanging midway installation. The text mode installation worked sucessfully but when the installation finished and rebooted the system i got the localhost login thing which i typed root and provided my password,logged in successfully but then the cursor was just blinking waiting for the next command, i then typed startx but immidiatelythe screen goes blank and hangs. I guess the problem has to do with vga but i'm newbie and don't knw what next to do.
View 1 Replies View RelatedWhen i try to boot up for the 1st time it says: Completing Ubuntu Install. 5, 4, 3, 2, 1, 0 ... No Signal.I have installed with Wubi, and also tryed with a USB. Nothing works. Signal.
View 9 Replies View RelatedI just installed Ubuntu and after the restart all I get is a black screen. Sounds like the program booted up but I can't see any thing.
Using a Gforce 9400 vid card.