Slackware :: Slackware64 And The Multilib Files - Should They Be Part Of The Default Install
Jan 3, 2010Is the future Slackware release 13.1 going to be default multilib...?
View 14 RepliesIs the future Slackware release 13.1 going to be default multilib...?
View 14 RepliesI'm getting ready to install Slackware64_13.1 (finally), and I may then install Eric's multilib packages. The slackbuild for Wine at Slackbuilds.org states:
[code]...
has anyone built WINE with the 32-bit compatibility packages? Does it work?
I'm going to install Slackware 13.1 soon and I may also install the 32-bit compatibility libraries from Eric (Alien BoB).I'd like confirmation on the process of updating multilib Slackware when there's a security patch. I'm talking about running the -stable branch, by the way.Under the normal methods of updating (e.g. 'slackpkg upgrade-all' or using the script I developed to download a local mirror of the patches directory and install from there, or even doing it by hand), the regular 64-bit packages will get updated.However, the 32-bit compatibility versions of those files won't get updated. Right?So I'll need to download the new 32-bit patches, run the convertpkg-compat32 script on them, and then upgradepkg the new files.
View 8 Replies View RelatedI am running Slackware64-13.1 on my laptop. I need to install skype on it. Searching this forum suggests that I install Alien Bob's multilib [URL] However, skype is the only 32-bit package I need and I will not need to compile any 32-bit software. So what is the minimal multilib install (the minimal set of 32-bit libraries) that make it possible for the 32-bit Skype to run on a 64-bit system? Will running
Code:
ldd /usr/bin/skype
on my 32-bit desktop machine provide me that minimal list of 32-bit packages? Also, will the installation of these libraries somehow interefere with the original 64-bit system?
I've just installed a Slackware64-13.0 test machine with alienBOB's multilib packages. I'm running the stock kernel generic-2.6.29.6 with an initrd set up using mkinitrd.confEverything is fine except that I cannot build a right initrd for kernels 2.6.30, both the /testing one or a custom build: if I try, it will panic at boot with the "couldn't find a valid RAM disk image" error.On the same hardware, without multilib support, I was able to correctly build and boot 2.6.30 initrds.
View 11 Replies View RelatedBeen thinking about changing over to 64 bit, but I was just curious about whether or not I'll have to worry about incompatibility with a few 32bit-only applications I use, once I've set up multilib. I'll test it out in vbox when I get home but I wanted to check here to see if I could maybe get a solid yes/no/maybe answer.
View 14 Replies View RelatedI've been trying to get some kind of virtualisation solution for my Slackware64, and I'd been having an absolute nightmare trying to get virtualbox to work on my Slackware64 install, so I decided to ditch it and move to KVM instead, as a type 1 hypervisor, having had success with QEMU in the past. I installed qemu-kvm along with all the dependencies using sbopkg, and I didn't have any problems building it, nor creating a user for kvm, or anything of that sort. However, now if I try to open a .iso on a disk image I created using qemu:
Code:
qemu-img create -f qcow2 ubuntu.qcow 4G
Which I am then easily able to access with qemu using the following command:
Code:
qemu ubuntu.qcow -cdrom /ISO/ubuntu-8.10-dvd-i386.iso -m 256 &
(I have an old ubuntu 8.10.iso on my PC that I used just to see if the thing would work) This works just as expected. However, if I try to launch the same .iso using kvm
Code:
kvm -hda ubuntu.qcow -cdrom /ISO/ubuntu-8.10-dvd-i386.iso -m 256 -boot -d &
all I get is "bash: command not found: kvm" I have already loaded the following modules: kvm, kvm-intel, tun. Could I be missing something?
[edit] Also just noticed that though I have created a group for kvm and added myself to libvirt, but when I issue the command "groups" neither of them are there, though I did use:
Code:
groupadd -g 221 kvm
And I was under the impression that I just needed to add my user to libvirt, without needing to manually create the group itself.I may have misunderstood the procedure for installing this properly, but I'm not sure what I've done wrong.
Is there an easy way to get all of the multilib files from [URL]? I've tried:
1.) wget - won't use wildcards on an http server, and trying to get the whole folder just gets me index.html
2.) ftp - it's not an ftp server and I can't login anonymously via gftp. I wasn't expecting this to work, it was just something else to try.
3.) rsync - If this could work, I may not be using the right syntax. I tried (-n for a dry run first):
Code:
rsync -avn [URL]
And it just sat there doing nothing until I hit ctl-c.
Obviously I could download each file from my web browser but I figured there had to be a more elegant Unix-y way without all the clicky-clicky. Are the files hosted on an ftp server anywhere?
I created this small how to install the binary Blender 2.49b on Slackware 13.1 86_x64 Multilib.
http://wiki.blender.org/index.php/Do..._Blender/Linux
I know the subject title makes it seem like this should be something on the Slackware forums but I think it can be generalized to other 64-bit Linux operating systems which is why I ask here. I'm running Slackware 13.37 64-bit and was wondering if I use Wine to run a Windows program (with multilib files), would it still run as if it had been used on a 64-bit computer?
View 2 Replies View RelatedI just installed Slack 13.1 x64 on my laptop and set up multilib per Alien Bob's wiki. I even successfully compiled and installed grub afterwards. But, am having big problems trying to compile or install guarddog. On my 1st try, I downloaded guarddog from Slackbuilds and replaced the SlackBuild script with this one which is off a thread in this forum:
Code:
It **appears** to compile, but, no .tgz package is made. I have folders and files under /tmp/SBo.
So, then I went back to SlackBuilds and downloaded this, original, 12.2 SlackBuild file:
Code:
I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 Replies View RelatedIs there any way to install "VirtualBox-3.2.12-68302" in the "slackware64-current" (Kernel 2.6.38.7) ?
I have problems with the 4.0.x version of VB!
The version "VirtualBox-3.2.12-68302" works fine with my hardware!
I tested using "VB 3.2.12" and Slackware64-13.37 (kernel 2.6.37.6).
I get the warning when I try to install a guest OS in "VB 3.2.12" running slackware64-current ...
Quote:
There is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
As root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first.
This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary"
And still
Quote:
Failed to open a session for the virtual machine Slackware12.0.
The virtual machine 'Slackware12.0' has terminated unexpectedly during startup with exit code 1.
Result Code:
Does anyone know if I need to build the proprietary ATI drivers specifically for 32-bit, or do the 64-bit packages take care of 32-bit compatibility? If so, how would I do that?
I tried:
Code:
But the package has the same files as its 64-bit counterpart. The reason I'm asking is I'm trying to get Neverwinter Nights working and a post I found mentioned this problem.
I get a single line error: "Failed to initialize graphics."
I want to take out the multilib capability for my system. Is it as simple as using "slackpkg clean-system", to remove all the compat32 pkgs, then using "slackpkg upgrade-all" to replace all the gcc and glibc packages?The reason I ask, is that I only used the multilib to be able to run Google Earth. There are no other x86 packages on the system. I have another x86 computer that will run Google Earth if I need it. It just wasn't worth it for this one package.
View 3 Replies View RelatedI installed Slackware64 13.1 two days ago for the first time ever on my Dell Inspiron 1525 after using linux for about a year (Debian and Fedora, though I've installed a few others in VMs). I've really enjoyed Slackware so far, it's been comparatively trouble free. However, I decided to follow AlienBOB's instructions to make it multilib, and though I thought I'd done everything right - I can't seem to compile any 32-bit 13.1 slackbuilds; I've tried with sbopkg as well as the normal method, but it simply won't work. I must have done something wrong, but I've re-read the instructions on getting mutilib working several times and I can't work out what it is.
View 14 Replies View RelatedI have a need to recompile mesa. The --enable-32-bit option falls over every header and basic 32 bit lib, and won't compile. But if I try to install 32 bit packages, I could slap a 32 bit binary straight on top of my 64 bit one. What's the accepted way of doing this? I can't seem to find a package in Slackware 13.0
View 9 Replies View RelatedI'm running a generic kernel with Slackware64 13.37 multilib. Every now and then it freezes at the boot time. It probably happens 1 every 5-7 times, so it's not a big problem, but it indicates that something is not right.
View 9 Replies View RelatedA certain program I use requires pango and gtkglext in 32 bit. I had already installed both of these in 64, and just now I downloaded .rpms for them in 32 bit and used rpm2tgz to turn them into .tgz files. The application i needed them for now works fine, but I'm wondering if installing precompiled packages like I did may mess with the 64 bit installs I already did, or if they can both be installed at the same time without any issues.
View 3 Replies View RelatedI have an old Win98 program that controls my amateur radio transceiver. I want to try it in wine, so have followed Eric's instructions on a clean -current installation. When I get to the wine SlackBuild, it tells me that it needs fontforge & webcore-fonts. I am assuming that I need to install these dependencies as 32-bit, but I am not sure, so would someone use the proper baseball bat to get me on track?
View 3 Replies View RelatedI have a Slackware64-Multilib 13.1 (from the Alien's wiki page) and decided to upgrade the kernel 33.4 to the 37.6 (also using the Alien's wiki page).
But now Adobe, Wine and other related packages with Multilib does not work. So I upgrade the gcc and glibc packages but the problem remains. What did I mess?
Would it be possible/advisable to add a note to the security emails if an updated package is also part of the multilib install? I know with this last round of updates, seamonkey-solibs and cups are a part of multilib. I snagged the 32bit versions, converted them, and upgraded. It's kind of hard to keep track of which packages are a part of multilib.
View 1 Replies View RelatedI have an odd problem with a computer I just set up. It is slack64 with Alien Bob's multilib packages. When I have the gtk+2-compat package installed I can no longer see any printers in firefox. I get error messages showing that it is trying to use the 32bit gtk+2 stuff. If I uninstall the gtk+2-compat package the printers show up as they should in firefox. I do not have this problem on my own slackware64/multilib system.
View 3 Replies View RelatedI am trying to use projectM with amarok, using jack. i have jack up and running fine, amarok works, and projectM builds, but it doesnt run. i built the 2.0.1 both from source and from SBo, but neither of them run correctly. when i run projectM-jack, i get the following spit back at me:
Code:
dir:/usr/share/projectM/config.inp
reading ~/.projectM/config.inp
[code]....
I have installed multilib by [url]. And 32-bit programs can run.
When I compile packages,something error.
Quote:
Quote:
I have tried what [url] say and not work too.
I am having a hard time compiling libmp4v2-1.5.0.2 in slackware64-current. It always fails with:
PHP Code:
make[2]: *** [rtphint.lo] Error 1make[2]: Leaving directory `/home/Downloads/libmp4v2-1.5.0.1'make[1]: *** [all-recursive] Error 1make[1]: Leaving directory `/home/Downloads/libmp4v2-1.5.0.1make: *** [all] Error 2
Anyone knows a slackbuild for netbeans 6.8 for slackware64?
View 5 Replies View RelatedIs it just me or does the font rendering in Slackware64 13.37 look bad? It reminds me of the bad old days of having to recompile freetype with the then-patent-encumbered option to make the fonts look decent. When I print, everything looks normal. On screen it doesn't look right. I don't really know how to describe it other than it how things used to change after a freetype recompile. Is there anything major that changed between 13.1 and 13.37 WRT fonts in KDE, X, or freetype for that matter? FWIW, I did a clean install with a new .kde instead of using the old one.
View 14 Replies View Relatedafter this bug update, my laptop loose the sound, I have run alsaconf and nothing.If I run rc.alsa I get:Quote:Loading ALSA mixer settings: /usr/sbin/alsactl restore
/usr/sbin/alsactl: load_state:1608: No soundcards found...
I've tried reinstalling Slackware64 13.1 to my PC a number of times over the past couple of days and I still have not been able to get it to boot.
Once it's installed I reboot and it tells me it can't find the operating system.
I've tried fdisk, cfdisk and GParted to set up the disk by deleting partitions and recreating them.
When I install and get to the section about installing LILO it says I have an OS/2 or Partition Magic boot manager on the drive, but there isn't. It asks if I want to install LILO in a compatible way with the boot manager and I say no, and install to the MBR. When I reboot it says it can't find the OS.
When I try to boot from the install DVD and get to the boot: prompt, I'll enter /dev/sda1 and it says there is no kernel.
Is there something else I'm missing?